Numerical Investigation of Casing Treatment Mechanisms with a Conservative Mixed-Cell Approach

American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI

Volumn 6 B, Issue , 2003, Pages 961-974

  Yang, H ^a   Nuernberger, D ^a   Nicke, E ^a   Weber, A ^a  

^a Institute of Propulsion Technology ^*  (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CASING TREATMENT; FLOW TOPOLOGY; TRANSONIC COMPRESSOR ROTOR;

ALGORITHMS; COMPRESSORS; COMPUTER SIMULATION; MASS TRANSFER; PROBLEM SOLVING; STATORS; TURBOMACHINE BLADES; TURBULENCE; VISCOSITY;

ROTORS;

EID: 0346335234     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2003-38483     Document Type: Conference Paper

References (40)

1. Ivanov, S. K., 1965, "Axial Blower," U.S. Patent No. 3189260.
2. Koch, C. C. and Smith, L. H. Jr., 1968, "Experimental Evaluation of Outer Casing Blowing or Bleeding of Single Stage Axial Flow Compressor, Part IV - Performance of Blowing Insert Configuration No. 1," NASA CR-54589.
3. Moore, R. D., Kovich, G., and Blade, R. J., 1971, "Effect of Casing Treatment on Overall and Blade-Element Performance of a Compressor Rotor," NASA TN D-6538.
4. Prince, D. C., Jr., Wisler, D. D., and Hilvers, D. E., 1974, "Study of Casing Treatment Stall Margin Improvement," NASA CR-134552.
5. Takata, H., and Tsukuda, Y., 1977, "Stall Margin Improvement by Casing Treatment - Its Mechanism and Effectiveness," ASME Journal of Engineering for Power, 99, pp. 121-133.
6. Greitzer, E. M., Nikkanen, J. P., Haddad, D. E., Mazzawy, R.S., and Joslyn, H. D., 1979, "A Fundamental Criterion for the Application of Rotor Casing Treatment," ASME Journal of Fluids Engineering, 101, pp. 237-243.
7. Paulon, J., and Dehondt, D., 1982, "Influence of Casing Treatment on the Operating Range of Axial Compressors," ASME Paper 82-GT-103.
8. Smith, G. D. J., and Cumpsty, N. A., 1984, "Flow Phenomena in Compressor Casing Treatment," ASME Journal of Engineering for Gas Turbines and Power, 106, pp. 532-541.
9. Azimian, A. R., Elder, R. J., and McKenzie, A. B., 1989, "Application of Recess Vaned Casing Treatment to Axial Flow Fans," ASME Paper 89-GT-68.
10. Thompson, D. W., King, P. I., and Rabe, D. C., 1997, "Experimental Investigation of Stepped Tip Gap Effects on the Performance of a Transonic Axial-Flow Compressor Rotor," ASME Paper 97-GT-7.
11. Furukawa, M., Inoue, M, Saiki K., and Yamada, K., 1998, "The Role of Tip Leakage Vortex Breakdown in Compressor Rotor Aerodynamics," ASME Paper 98-GT-239.
12. Schlechtriem, S., and Loetzerich, M., 1997, "Breakdown of Tip Leakage Vortices in Compressors at Flow Conditions Close to Stall," ASME Paper 97-GT-41.
13. Wilke, I., and Kau, H.-P., 2002, "A Numerical Investigation of the Influence of Casing Treatments on the Tip Leakage Flow in a HPC Front Stage," ASME Paper GT-2002-30642.
14. Crook, A. J., Gretizer, E. M., Tan, C. S., and Adamczyk, J. J., 1993, "Numerical Simulation of Compressor Endwall and Casing Treatment Flow Phenomena," ASME Journal of Turbomachinery, 115, pp. 501-512.
15. Hathaway, M. D., 2002, "Self-Recirculating Casing Treatment Concept for Enhanced Compressor Performance," ASME Paper GT-2002-30368.
16. Rabe, D. C., and Hah, C., 2002, "Application of Casing Circumferential Grooves for Improved Stall Margin in a Transonic Axial Compressor," ASME Paper GT-2002-30641.
17. Yang, H., Nuernburger, D., Weber, A., 2002, "A Conservative Zonal Approach with Applications to Unsteady Turbomachinery Flows," Deutscher Luft- und Raumfahrt Kongress 2002, DGLR-JT2002-073, Sept. 23-26, Stuttgart, Germany.
18. Rai, M. M., 1984, "A Conservative Treatment of Zonal Boundaries for Euler Calculations," AIAA 84-0161.
19. Furukawa, M., Yamasaki, M., and Inoue, M., 1990, "A Zonal Approach for Solving the Compressible Navier-Stokes Equations Using a TVD Finite Volume Method," JSME Int. J., Series II, 33, pp. 665-673.
20. Klopfer, G. H., and Molvik, G. A., 1991, "Conservative Multizonal Interface Algorithm for the 3-D Navier-Stokes Equations," AIAA-91-1601-CP.
21. Koff, S. G., Mazzawy, R. S., Nikkanen, J. P., and Nolcheff, N.A., 1994, "Case Treatment for Compressor Blades," U.S. Patent No. 5282718.
22. Hobbs, D. E., 1995, "Active Vaned Passage Casing Treatment," U.S. Patent No. 5431533.
23. Nolcheff, N. A., 1996, "Flow Aligned Plenum Endwall Treatment for Compressor Blades," U.S. Patent No. 5586859.
24. Eulitz, F., Engel, K., Nuernberger, D., Schmitt, S., and Yamamoto, K., 1998, "On Recent Advances of a Parallel Time-Accurate Navier-Stokes Solver for Unsteady Turbomachinery Flow," Proceedings, 4th ECCOMAS, Papailiou et al., eds., John Wiley & Sons, Vol. 1, pp. 252-258.
25. Nuernberger, D., Eulitz, F., Schmitt, S., and Zachcial, A., 2001, "Recent Progress in the Numerical Simulation of Unsteady Viscous Multistage Turbomachinery Flow," ISABE-2001-1081.
26. Giles, M. B., 1988, "Non-Reflecting Boundary Conditions for the Euler Equations," CFDL-TR-88-1, CFD Lab., MIT.
27. Saxer, A. P., and Giles, M. B., 1993, "Quasi-Three-Dimensional Nonreflecting Boundary Conditions for Euler Equations Calculations," AIAA J. Prop. and Power, 9, pp.263-271.
28. Acton, E. and Cargill, M., 1988, "Non-Reflecting Boundary Conditions for Computations of Unsteady Turbomachinery Flow," Proceedings, 4th Int. Symp. Unsteady Aerodynamics and Aeroalesticity of Turbomachines and Propellers, pp. 211-228.
29. Newman, W. M., and Sproull, R. F., 1979, "Principles of Interactive Computer Graphics," McGraw-Hill, New York, pp. 69-72
30. Roc, P. L., 1981, "Approximate Riemann Solvers, Parameter Vectors and Difference Schemes," Journal of Computational Physics, 43, pp.357-372.
31. Ergratoudis, I., Irons, B. M., and Zienkiewicz, O. C., 1968, Curved Isoparametric, Quadrilateral Elements for Finite Element Analysis," Int. J. Solid Structures, 4, pp.31-42.
32. Blaha, C., Hennecke, D. K., Fritsch, G., Hoeger, M., and Beversdorff, M., 1997, "Laser-2-Focus Measurements in a Transonic Compressor Blisk-Rotor and Comparison with 3D Numerical Simulations," ISABE-97-7069.
33. Schmitt, S., Eulitz, F., Wallscheid, L., Arnone, A., and Marconcini, 2001, "Evaluation of Unsteady CFD Methods by Their Application to a Transonic Propfan Stage," ASME Paper 2001-GT-310.
34. Schmitt, S., Eulitz, F., Nuernberger, D., and Wallscheid, L., 2000, "DLR's Propfan CRISP Test Case Computations," ERCOFTAC - APPACET Seminar and Workshop on Turbomachinery Flow Prediction VIII, March 19-23, La Clusaz, France.
35. Nuernberger, D., and Nicke, E., 2002, "Potential of 3D-Flow-Simulation for Multistage Turbomachinery Design,", Proceedings ODAS, 4th ONERA-DLR Aerospace Symposium, June 13-14, Cologne, Germany, pp. 18-25.
36. Hummel, F., 2002, "Wake-Wake Interaction and Its Potential for Clocking in a Transonic High-Pressure Turbine," ASME Journal of Turbomachinery, 124, pp. 69-76.
37. Nuernberger, D., Eulitz, F., and Schmitt, S., 1999, Effiziente Berechnung der Instationaeren Stroemung in Turbomaschinen Mittels Impliziter Zeitintegration," DGLR-Jahrestagung, Sept. 27-30, Berlin, Germany.
38. Eulitz, F., 1999, "A RANS Method for The Time-Accurate Simulation of Wake-Induced Boundary-Layer Transition in Turbine Flows," ISABE-99-7275.
39. Delery, J. M., 1994, "Aspects of Vortex Breakdown," Progress in Aerospace Sciences, 30, pp. 1-59.
40. Gerolymos, G. A., and Vallet, I., 1998, "Tip-Clearance and Secondary Flows in a Transonic Compressor Rotor," ASME Paper 98-GT-366.