Structural health monitoring R & D at the "European Research Establishments in Aeronautics" (EREA)

Aerospace Science and Technology

Volumn 6, Issue 3, 2002, Pages 159-170

  Balageas, Daniel L ^a  

^a ONERA   (France)

Author keywords

[No Author keywords available]

Indexed keywords

AERODYNAMICS; AVIATION; INFORMATION RETRIEVAL; INTELLIGENT STRUCTURES; RESEARCH AND DEVELOPMENT MANAGEMENT; SOCIETIES AND INSTITUTIONS; TECHNOLOGY TRANSFER;

RESEARCH ESTABLISHMENTS (RE); STRUCTURAL HEALTH MONITORING (SHM);

AEROSPACE ENGINEERING;

EID: 0346093751     PISSN: 12709638     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1270-9638(01)01140-3     Document Type: Article

References (40)

1. D. Balageas, S. Bourasseau, M. Dupont, E. Bocherens, V. Dewynter-Marty, P. Ferdinand, Comparison between nondestructive evaluation techniques and integrated fiber optic health monitoring systems for composite sandwich structures, J. Intelligent Material Systems and Structures 11 (2001) 426-437.
2. D.L. Balageas, N. Jaroslavsky, M. Dupont, F. Lepoutre, D. Osmont, Laser generated Lamb waves in carbon/epoxy composite structures using an embedded fiber optic delivery system, in: Smart Structures and Materials 2000: Smart Structures and Integrated Systems, SPIE Proc. Series, Vol. 3985, 2000, pp. 543-550.
3. E. Bocherens, S. Bourasseau, V. Dewynter-Marty, H. Berenger, Damage detection in a radome sandwich material with embedded fiber optic sensors, in: Smart Materials and Structures, Vol. 9, 2000, pp. 310-315.
4. S. Bourasseau, M. Dupont, M. Pernice, A. Thiriot. P. Blanquet, T. Demol, C. Delebarre, D. Coutellier, Integration of optical fibers and piezoelectric ceramics in composite materials, in: SPIE Proc., Vol. 2779, 1996, pp. 180-185.
5. G. Coppola, A. Cusano, A. Minardo, G. Breglio, A. Cutolo, M. Giordano, L. Nicolais, A. Calabrò, Analysis of the frequency dependence of the ultrasounds responsivity of Bragg grating sensors, in: Smart Structures and Materials 2001: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, SPIE Proc. Series, Vol. 4328, 2001.
6. A. Cusano, G. Breglio, A. Calabrò, M. Giordano, A. Cutolo, L. Nicolais. An optoelectronic sensor for cure monitoring in thermoset based composites, Sensors and Actuators A 84 (3) (2000) 270-275.
7. A. Cusano, P. Salvarezza, G. Breglio, A. Cutolo, A. Calabrò, M. Giordano, S. De Nicola, L. Nicolais, An integrated fiber optic sensing system for in situ characterization of the curing process of thermoset based composites, in: Smart Structures and Materials 2001: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, SPIE Proc. Series, Vol. 4328, 2001.
8. T. Demol, P. Blanquet, C. Delebarre, H. Kaczmarek, Comparison between flat multi-element array device and oblique incidence transducers for Lamb waves generation. Application for embedment in composite material, in: SPIE Proc., Vol. 2779, 1996, pp. 146-151.
9. D. Devillers, F. Taillade, D. Osmont, D. Balageas, D. Royer, Interaction of Lamb waves with defects in composite sandwich structures, in: European COST F3 Conf. On System Identification & Structural Health Monitoring, Universidad Politécnica de Madrid, Madrid, Spain, 2000, pp. 629-638.
10. M. Dupont, D. Osmont, R. Gouyon, D.L. Balageas, Permanent monitoring of damaging impacts by a piezoelectric sensor based integrated system, in: F.-K. Chang (Ed.). Structural Health Monitoring 2000, Technomic Publishing, Lancaster, PA, 1999, pp. 561-570.
11. P.D. Foote, Structural health Monitoring: Tales from Europe, in: Structural Health Monitoring 2000, Technomic Publishing, Lancaster, PA, 1999, pp. 24-35.
12. M. Frövel, I. Fernandez, J.M. Pintado, J.M. Menendez, J.A. Güemes, Monitoring the buckling and postbuckling behaviour of stiffened CFRP panels with fibre optic sensors, in: European COST F3 Conf. On System Identification & Structural Health Monitoring, Universidad Politécnica de Madrid, Madrid, Spain, 2000, pp. 539-548.
13. M. Frövel, I. Fernandez, J.M. Pintado, J.A. Güemes, Integrated fibre optic sensor for monitoring the buckling behaviour of stiffened panels, in: Proc. Adaptronics Congress 2001, Berlin, Germany, 2001, pp. 22.1-22.7.
14. R. Jarlås, K. Levin, Location of embedded fiber optic sensors for minimized impact vulnerability, J. Intelligent Material Systems and Structures 10 (1999) 187-194.
15. H. Kaczmarek, C. Simon, C. Delebarre, Evaluation of Lamb wave performances for health monitoring of composites using bonded piezoelectric transducers, in: SPIE Proc. Series, Vol. 2779, 1996, pp. 130-135.
16. S. Kaiser, J. Mecher, E. Breitbach, D. Sachau, Structural dynamic health monitoring of adaptive CFRP-structures, in: 6th Annual Int. Symposium on Smart Structures and Materials, Newport Beach, CA, USA, 1999.
17. S. Keye, M. Rose, D. Sachau, Localizing delaminations damage in aircraft panels from modal damping parameters, in: XIXth Int. Modal Analysis Conference, Orlando, CA, USA, 2001.
18. M. Lemistre, R. Gouyon, H. Kaczmarek, D. Balageas, Damage localization in composite plates using wavelet transform processing on Lamb wave signals, in: F.-K. Chang (Ed.), Structural Health Monitoring 2000, Technomic Publishing, Lancaster, PA, 1999, pp. 861-870.
19. M. Lemistre, D. Osmont, D. Balageas, Active health system based on wavelet transform analysis of diffracted Lamb waves, in: Fifth European Conf. on Smart Structures and Material, SPIE Proc. Series, Vol. 4073, SPIE, Bellingham, WA, 2000, pp. 194-201.
20. M. Lemistre, D. Balageas, Structural health monitoring system based on diffracted Lamb waves analysis by discrete wavelet transform, in: European COST F3 Conf. On System Identification & Structural Health Monitoring, Universidad Politécnica de Madrid, Madrid, Spain, 2000, pp. 561-570.
21. M. Lemistre, D. Martinez, D. Balageas, Electromagnetic structural health monitoring for carbon epoxy multilayer material, in: European COST F3 Conf. On System Identification & Structural Health Monitoring, Universidad Politécnica de Madrid, Madrid, Spain, 2000, pp. 687-695.
22. M. Lemistre, D. Balageas, Electromagnetic Structural Health Monitoring for Composite Materials, in: Third Int. Workshop on Structural Health Monitoring, Stanford, CA, 2001.
23. L'Onera et le DLR préparent leur fusion, in Air et Cosmos, no 1797, May 25, 2001, p. 14.
24. K. Levin, R. Jarlås, Vulnerability of embedded EFPI-sensors to low-energy impacts, in: Smart Materials and Structures, Vol. 6, 1997, pp. 369-382.
25. K. Levin, Interfacial strength of optical fibres, in: Proc. Twelfth International Conference on Composite Materials, ICCM-12, Paris, France, 1999, p. 757.
26. J. Matrat, K. Levin, R. Jarlås, Effect of debonding on strain measurement with embedded Bragg grating sensors, in: F.-K. Chang (Ed.), Structural Health Monitoring 2000, Technomic Publishing, Lancaster, PA, 1999, pp. 651-660.
27. J. Mecher, Synthesis of optimized adaptive digital filters for system identification and vibration control, in: Int. Forum on Aeroelasticity and Structural Dynamics, Aachen, Germany, 1991, pp. 56-64.
28. MONITOR (Monitoring ON-line Integrated Technologies for Operational Reliability) BRITE-EURAM project No: BE 95-1524.
29. E. Moulin, J. Assaad, C. Delebarre, H. Kaczmarek, D. Balageas, Piezoelectric transducer embedded in a composite plate: Application to Lamb wave generation, J. Appl. Phys. 82 (5) (1997) 2049-2055.
30. E. Moulin, J. Assaad, C. Delebarre, D. Osmont, Modeling of Lamb waves generated by integrated transducers in composite plates, using a coupled finite element - Normal modes expansion method, J. Acoust. Soc. Am. 107 (1) (2000) 87-94.
31. D. Osmont, M. Dupont, R. Gouyon, M. Lemistre, D. Balageas, Piezo-electric transducer network for dual mode (active/passive) detection, localisation, and evaluation of impact damages in carbon/epoxy composite plates, in: Fifth European Conf. on Smart Structures and Materials, SPIE Proc., Vol. 4073, 2000, pp. 130-137.
32. C.A. Paget, K. Levin, Structural integrity of composites with embedded piezoelectric ceramic transducer, in: Smart Structures and Materials 1999: Smart Structures and Integrated Systems, SPIE Proc. Series, Vol. 3668, 1999, pp. 306-313.
33. C.A. Paget, K. Levin, C. Delebarre, Behaviour of an embedded piezoceramic transducer for Lamb wave generation in mechanical loading, in: Smart Structures and Materials 2000: Smart Structures and Integrated Systems, SPIE Proc. Series, Vol. 3985, 2000, pp. 510-520.
34. A. Sjögren, B. Lindström, Connection of optical fibers embedded in aircraft composite components, in: Smart Structures and Materials 2000: Smart Structures and Integrated Systems, SPIE Proc. Series, Vol. 3985, 2000, pp. 533-542.
35. A. Skontorp, J. Cammas, Static fatigue life of silica optical fibers and the significance of fiber coating and handling, in: Smart Structures and Materials 2001: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, SPIE Proc. Series, Vol. 4328, 2001.
36. A. Skontorp, Structural integrity of quasi-isotropic composite laminates with embedded optical fibers, J. Reinforced Plastics and Composites 19 (1998) 1056-1077.
37. A. Skontorp, Effect of embedded optical fibers on the structural integrity of composites, in: Proc. Twelfth International Conference on Composite Materials, ICCM-12, Paris, France, 1999, p. 761.
38. A. Skontorp, Strength and failure mechanisms of polyimide-coated optical fibers, in: Smart Structures and Materials 2000: Sensory Phenomena and Measurement Instrumentation for Smart Structures and Materials, SPIE Proc. Series, Vol. 3986, 2000, pp. 240-251.
39. D.J. Spiekhout, RNLAF load monitoring program using FACE and ORACLE data base, in: F-16 ASIP Program Review, June 13-15, Fort Worth, TX, 2000.
40. F. Taillade, J.-C. Krapez, F. Lepoutre, D. Balageas, Shearographic visualization of Lamb waves in carbon epoxy plates: interaction with delaminations, European Phys. J. Appl. Phys. 9 (2000) 69-73.