Structural stability

International Journal of Solids and Structures

Volumn 37, Issue 1-2, 2000, Pages 55-67

  Bažant, Zdeněk P ^a  

^a NORTHWESTERN UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONVERGENCE OF NUMERICAL METHODS; CREEP; DYNAMIC RESPONSE; ELASTICITY; FRACTURE MECHANICS; STABILITY; THERMODYNAMICS;

ANELASTIC STRUCTURE; DAMAGE INDUCED INSTABILITY; ENERGY APPROACH; STATIC RESPONSE; STRUCTURAL STABILITY;

STRUCTURAL ANALYSIS;

EID: 0345856544     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0020-7683(99)00078-5     Document Type: Article

References (100)

1. Almroth, B.O., Holmes, A.M.C., Brush, D.O., 1964. An experimental study of the buckling of cylinders under axial compression. Exp. Mech. 4, 263.
2. Bažant, Z.P., 1971. A correlation study of incremental deformations and stability of continuous bodies. Journal of Applied Mechanics, Trans. ASME 38, 919-928.
3. Bažant, Z.P., 1976. Instability, ductility, and size effect in strain-softening concrete. J. Engng. Mech. Div., Am. Soc. Civil Engrs., 102, EM2, 331-344; disc. 103, 357-358, 775-777, 104, 501-502.
4. Bažant, Z.P., 1986. Mechanics of distributed cracking. Appl. Mech. Reviews ASME 39, 675-705.
5. Bažant, Z.P., 1994. Nonlocal damage theory based on micromechanics of crack interactions. J. of Engrg. Mech., ASCE 120 (3), 593-617. Addendum and Errata 120, 1401-02.
6. Bažant, Z.P., 1988. Stable states and paths of structures with plasticity or damage. J. of Eng. Mech. ASCE 114 (12), 2013-2034.
7. Bažant, Z.P., Belytschko, T.B., Chang, T.-P., 1984. Continuum model for strain softening. J. of Engng Mechanics ASCE 110 (12), 1666-1692.
8. Bažant, Z.P., Li, Y.-N., 1995. Stability of cohesive crack model: Part I - Energy principles. Trans. ASME, J. of Applied Mechanics 62 (Dec.), 959-964.
9. Bažant, Z.P., Planas, J., 1998. Fracture and size effect in concrete and other quasibrittle materials. CRC Press, Boca Raton, Florida, and London.
10. Bažant, Z.P., Cedolin, L., 1979. Blunt crack propagation in finite element analysis. J. of the Engng. Mech. Div., Proc. ASCE 105, 297-315.
11. Bažant, Z.P., Cedolin, L., 1991. Stability of Structures: Elastic, Inelastic, Fracture and Damage Theories. Oxford University Press, New York.
12. Bažant, Z.P., Chen, E.-P., 1997. Scaling of structural failure. Applied Mechanics Reviews ASME 50 (10), 593-627.
13. Bažant, Z.P., Jirǎsek, M., 1996. Softening-induced dynamic localization instability: seismic damage in frames. ASCE J. of Engrg. Mechanics 122 (12), 1149-1158.
14. Bažant. Z.P., Kim, J.-J.H., Daniel, I.M., Becq-Giraudon, E., 1999. Size effect on compression strength of fiber composites failing by kink band propagation. Int. J. of Fracture 95 (1-4), 103-141.
15. Bažant, Z.P., Oh, B.H., 1983. Crack band theory for fracture of concrete. Materials and Structures (RILEM, Paris) 16, 155-177.
16. Bažant, Z.P., Xiang, Y., 1997a. Inelastic buckling of concrete column in braced frame. J. of Structural Engrg. ASCE 123 (5), 634-642.
17. Bažant, Z.P., Xiang, Y., 1997b. Postcritical imperfection-sensitive buckling and optimal bracing of large regular frames. J. of Structural Engrg. ASCE 123 (4), 513-522.
18. Belytschko, T., Fish, J., Engelmann, B.E., 1988. A finite element method with embedded localization zones. Computer Meths. in Appl. Math. & Engrg. 70, 59-89.
19. Biezeno, C.B., and Hencky, H. (1928). On the general theory of elastic stability, Koninklijke Akademie van Wettenschappen te Amsterdam, Proceedings of the Section of Sciences, vol. 31 1928, pp. 569-92 (Meetings Dec. 1927, Jan. 1928), and vol. 32, 1929, pp. 444-56 (April 1929 Meeting).
20. Biezeno, C.B., and Hencky, H. (1928). On the general theory of elastic stability, Koninklijke Akademie van Wettenschappen te Amsterdam, Proceedings of the Section of Sciences, vol. 31 1928, pp. 569-92 (Meetings Dec. 1927, Jan. 1928), and vol. 32, 1929, pp. 444-56 (April 1929 Meeting).
21. de Borst, R., 1987. Computation of post-bifurcation and post-failure behavior of strain-softening solids. Computers and Structures 25, 211-224.
22. de Borst, R., 1988a. Bifurcations in finite element models with a nonassociated flow law. Int. J. Numer. Analytical Meth. in Geomechanics 12, 99-116.
23. de Borst, R., 1988b. Numerical methods for bifurcation analysis in geomechanics. In: Ingenieur-Archiv. Springer-Verlag, Berlin.
24. Bolotin, V., 1969. Statistical methods in structural mechanics, (transl. from Russian), chapter 4. HoldenDay, San Francisco.
25. Budiansky, B., 1983. Micromechanics. Computers and Structures 16 (No. 1-4), 3-12.
26. Budiansky, B., Fleck, N.A., Amazigo, J.C., 1997. On compression kink band propagation. In: Report MECH 305. Harvard University, Cambridge (also: submitted to J. Mech. Phys. Solids).
27. Budiansky, B., Hutchinson, J.W., 1964. Dynamic buckling of imperfection-sensitive structures. In: Proc. 12th Int. Cong. Appl. Mech., pp. 636-651 (held in Munich).
28. Budiansky, B., Hutchinson, J.W., 1972. Buckling of circular cylindrical shells under axial compression. In: Contributions to the theory of aircraft structures. Delft University Press, Netherlands, pp. 239-260.
29. Cervenka, V., 1998. Applied brittle analysis of concrete structures. In: Mihashi, H., Rokugo, K. (Eds.), Fracture Mechanics of Concrete Structures (Proc. 5th Int. Conf. FraMCoS-5, Gifu, Japan), vol. 4. postconf. Aedificatio Publ., Freiburg, Germany, pp. 1107-1116.
30. Chwalla, E., 1928. Die Stabilität zentrisch und exzentrisch gedrückter Stäbe aus Baustahl, Part IIa. Sitzungsberichte der Akademie der Wissenschaften, Wien, p. 469.
31. Crandall, S.H., 1995. The effect of damping on the stability of gyroscopic pendulums. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM) 46, S762-S780.
32. Donnell, L.H., 1934. A new theory for the buckling of thin cylinders under axial compression and bending. Trans. ASME 56, 795-806.
33. Engesser, F., 1889. Die Knickfestigkeit gerader Stäbe. Z. Architekten und Ing. Vereins zu Hannover 35, 455.
34. Engesser, F., 1895. Über Knickfragen, Schweizerische Bauzeitung 26, 24-26.
35. Engesser, F., 1899. Über die Knickfestigkeit gerader Stäbe, Zeitschrift für Architektur und Ingenieurwesen, vol. 35.
36. Eringen, A.C., 1965. Theory of micropolar continuum. In: Proc., Ninth Midwestern Mechanics Conference. Univ. of Wisconsin, Madison, pp. 23-40.
37. Euler, L., 1744. Methodus Inveniendi Lineas Curvas Maximi Minimive Porprietate Gaudentes (Appendix, De Curvis Elasticis). Marcum Michaelem Bosquet, Lausanne.
38. Fleck, N.A., 1997. Compressive failure of fiber composites. Advances in Applied Mechanlcs 33, 43-117.
39. Föppl, A., 1907. Vorlesungen über technische Mechanik (in six volumes), vol. 5. Druck und Verlag von B.G. Teubner, Leipzig, p. 132.
40. Freudenthal, A.M., 1950. The Inelastic Behavior of Engineering Materials and Structures. John Wiley & Sons, New York.
41. Gerard, G., Becker, H., 1957. Handbook of structural stability: part I, buckling of flat plates, NACA Tech. Note No. 3781.
42. Hadamard, J., 1903. Leçons sur la propagation des ondes. Chap. VI, Hermann Paris.
43. Haringx, J.A., 1942. On the buckling and lateral rigidity of helical springs. In: Proc. Konink. Ned. Akad. Wet, 45, p. 533 see also Timoshenko and Gere (1961), p. 142.
44. Haringx, J.A., 1942. On the buckling and lateral rigidity of helical springs. In: Proc. Konink. Ned. Akad. Wet, 45, p. 533 see also Timoshenko and Gere (1961), p. 142.
45. Hill, R., 1958. A general theory of uniqueness and stability in elastic-plastic solids. J. Mech. Phys. Solids 6, 236-249.
46. Hill, R., 1962. Uniqueness criteria and extremum principles in self-adjoint problems of continuum mechanics. J. Mech. Phys. Solids 10, 185-194.
47. Hilton, H.H., 1952. Creep collapse of viscoelastic columns with initial curvatures. J. Aero. Sci. 19, 844-846.
48. Hoff, N.J. (1958). A survey of the theories of creep buckling, Proc. 3rd U.S. Nat. Congr. Appl. Mech., pp. 29-49, Providence, R.I.
49. Hurlbrink, E., 1908. Schiffbau 9, 517.
50. Hutchinson, J.W., 1974. Plastic buckling. Adv. Appl. Mech. 14, 67-144.
51. James, B.W., 1935. Principal effects of axial load by moment distribution analysis of rigid structures, NACA Tech. Note No. 534.
52. Jirásek, M., 1998. Embedded crack models for concrete fracture. In: de Borst, R., et al. (Eds.), Proc. Conf. on Computational Modeling of Concrete Structures (EURO-C) (held in Badgastein, Austria). Balkema, Rotterdam, pp. 291-300.
53. Kirchhoff, G.R., 1859. Über das Gleichgewicht und die Bewegung eines unendlich dünnen elastischen Stabes. J. Math. (Crelle) 56, 285-313.
54. Koiter, W.T., 1945. Over de stabiliteit van het elastische evenwicht. Dissertation, Delft, Holland (Translation: On the Stability of Elastic Equilibrium, NASA TT-F-10833, 1967 and AFFDL-TR-70-25, 1970).
55. Lagrange, J.L., 1788. Mécanique Analytique. Courier, Paris.
56. Leroy, Y., Ortiz, M., 1989. Finite element analysis of strain localization in frictional materials. Int. J. Numer. Analytical Meth. in Geomechanics 13, 53-74.
57. Li, Y.-N., Hong, A.N., Bažant, Z.P., 1995. Initiation of parallel cracks from surface of elastic half-plane. Int. J. of Fracture 69, 357-369.
58. Liapunov, A.M., 1893. Issledovanie odnogo iz ossobenykh sluchaev zadachi ob ustoichivosti dvizhenia. Matem. Sbornik 17, 253-333 (also Liapunov's 1892 dissertation).
59. Livesley, R.K., Chandler, D.B., 1956. Stability Functions for Structural Frameworks. Manchester University Press, Manchester.
60. Lorenz, R., 1908. Achsensymmetrische Verzerrungen in dünnwandingen Hohlzzylindern. Zeitschrift des Vereines Deutscher Ingenieure 52 (43), 1706-1713.
61. Maier, G., Zavelani, A., Dotreppe, J.C., 1973. Equilibrium branching due to flexural softening. J. Eng. Mech. (ASCE) 99 (4), 897-901.
62. Mandel, J., 1964. Conditions de stabilité et postulat de Drucker. In: Kravtchenko, J., Sirieys, P.M. (Eds.), Rheology and Soil Mechanics. Springer-Verlag, Berlin, pp. 56-68.
63. Moon, F.C., 1986. Chaotic Vibrations. John Wiley and Sons, New York.
64. Needleman, A., 1982. A numerical study of necking in circular cylindrical bars. J. Mech. Phys. Solids 20, 111-120.
65. Neuber, H., 1943. Grundlagen der elastischen Stabilität in allgemeinen Koordinaten und ihre Integration. Z. angew. Math, und Mech. (ZAMM) 23 (6), 321-330.
66. Nguyen, Q.S., 1987. Bifurcation and postbifurcation analysis in plasticity and brittle fracture. J. Mech. Phys. Solids 35 (3), 303-324.
67. Nissim, 1965. Effect of linear damping on flutter speed. The Aeronautical Quarterly 16, 159-178.
68. Ortiz, M., Leroy, Y., Needleman, A., 1987. A finite element method for localized failure analysis. Computer Meths. in Appl. Mech. & Engrg. 61, 189-214.
69. Osgood, W.R., 1951. The effect of residual stress on column strength. In: Proc. 1st U.S. Nat. Cong. Appl. Mech, p. 415.
70. Parker, A.P., 1999. Stability of arrays of multiple edge cracks. Engrg. Fracture Mechanics 62, 577-591.
71. Peerlings, R.H.J., de Borst, R., Brekelmans, W., Vre, J., 1996. Gradient enhanced damage for quasibrittle materials. Int. J. of Num. Meth. in Engrg. 39, 3391-3403.
72. Petryk, H., 1985b. On stability and symmetry condition in time-dependent plasticity. Arch. Mech. Stos. (Warsaw) 37 (4-5), 503-520.
73. Plantema, F.J., 1966. Sandwich Construction: The Bending and Buckling of Sandwich Beams, Plates and Shells. John Wiley and Sons, New York.
74. Rashid, J.R., 1968. Analysis of pre-stressed concrete vessels. Nuclear Engrg. & Design 7 (4), 334-335.
75. Rayleigh, J.W.S., 1894. The Theory of Sound, vol. 1. Macmillan, New York also Dover Publications, New York, 1945.
76. Rice, J.R., 1976. The localization of plastic deformation. In: Congress of Theor. and Appl. Mech, vol. 1. Delft, the Netherlands, pp. 207-220.
77. Rice, J.R., Ruina, A.L., 1982. Stability of steady frictional slipping. J. of Applied Mechanics (ASME) 50, 343-349.
78. Rizzi, E., Carol, I., Willam, K., 1995. Localization analysis of elastic degradation with application to scalar damage. J. of Engrg. Mech. ASCE 121 (4), 541-554.
79. Rosen, B.W., 1965. Mechanics of composite strengthening. In: Fiber Composite Materials, Am. Soc. for Metals Seminar, chapter 3. American Society for Metals, Metals Park, Ohio, pp. 37-75.
80. Rudnicki, J.W., Rice, J.R., 1975. Conditions for the localization of deformation in pressure-sensitive dilatant materials. J. Mech. Phys. Solids 23, 371-394.
81. Semler, C., Alighanbari, H., Païdoussis, M.P., 1998. Physical explanation of the destabilizing effect of damping. J. of Applied Mechanics ASME 65, 642-648.
82. Shanley, F.R., 1947. Inelastic column theory, J. Aero. Sci. 14 (5), 261-268.
83. Simiu, E., Scanlan, R.H., 1986. Wind Effects on Structures: An Introduction to Wind Engineering, 2nd ed. John Wiley and Sons, New York.
84. Southwell, R.V., 1914. On the general theory of elastic stability. Phil. Trans. Roy. Soc. London, Series A 213, 187-244.
85. Tennyson, R.C., 1969. Buckling modes of circular cylindrical shells under axial compression. AIAA Journal 7, 1481.
86. Tennyson, R.C., Chan, K.C., 1990. Buckling of imperfect sandwich cylinders under axial compression. Int. J. of Solids and Structures 26, 1017-1036.
87. Thom, R., 1975. Structural Stability and Morphogenesis, translated from French by D.H. Fowler. Benjamin, Reading.
88. Thompson, J.M.T., 1982. Instabilities and Catastrophes in Science and Engineering. John Wiley and Sons, Chichester, New York.
89. Thompson, J.M.T., 1989. Chaotic dynamic and the Newtonian legacy. Appl. Mech. Rev. 42 (1), 15-25.
90. Thompson, J.M.T., Stewart, H.B., 1986. Nonlinear Dynamics and Chaos. John Wiley and Sons, Chichester, New York.
91. Timoshenko, S.P., 1910. Einige Stabilitätsprobleme der Elastizitätstheorie. Zeitschrift für angew. Math. Phys. (ZAMP) 58 (4), 337-385.
92. Timoshenko, S.P., Gere, J.M., 1961. Theory of Elastic Stability. McGraw-Hill, New York.
93. Trefftz, E., 1933. Zur Theorie der Stabilität des elastischen Gleichgewichts. Z. angew. Math, und Mech. (ZAMM) 12 (2), 160-165.
94. Tvergaard, V., 1982. On localization in ductile materials containing spherical voids. Int. J. Fracture 18, 237-252.
95. von Kármán, T., 1910. Untersuchungen über Knickfestigkeit, Mitteilungen über Forschungsarbeiten auf dem Gebiete des Ingenieurwesens, No. 81 Berlin.
96. von Kármán, T., Sechler, E.E., Donnell, L.H., 1932. The strength of thin plates in compression. Trans. ASME 54, 53-58.
97. von Kármán, T., Tsien, H.S., 1941. The buckling of thin cylindrical shells under axial compression. J. Aero. Sci. 8 (6), 303-312.
98. Von Mises, R., Ratzersdorfer, J., 1926. Die Knicksicherheit von Rahmentragwerken. Zeitschrift für Angew. Math, und Mech. (ZAMM) 6, 181.
99. Yang, C.H., Beedle, L.S., Johnston, B.G., 1952. Residual stress and the yield strength of steel beams. Welding Journal 31 (4), 205-229 (Supplement).
100. Young, T., 1807. A Course of Lectures on Natural Philosophy and the Mechanical Arts, London.