Numerical simulation of three-dimensional steady-state rolling by the reproducing kernel particle method

Engineering Computations (Swansea, Wales)

Volumn 20, Issue 7-8, 2003, Pages 855-874

  Xiong, S ^a   Rodrigues, J M C ^a   Martins, P A F ^a  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

Compression loading; Numerical analysis; Physical properties of materials

Indexed keywords

BOUNDARY CONDITIONS; FINITE ELEMENT METHOD; GEOMETRY; NUMERICAL ANALYSIS; STRAIN; STRAIN RATE; STRESSES; TEMPERATURE DISTRIBUTION;

COMPRESSION LOADING; REPRODUCING KERNEL PARTICLE METHOD; THREE-DIMENSIONAL STEADY-STATE ROLLING;

COMPUTER SIMULATION;

EID: 0345549589     PISSN: 02644401     EISSN: None     Source Type: Journal    
DOI: 10.1108/02644400310502018     Document Type: Article

References (38)

1. Askes, H., de Borst, R. and Heeres, O.M. (1999), "Conditions for locking-free elasto-plastic analysis in the element-free Galerkin method", Comput. Meth. Appl. Mech. Eng., Vol. 173, p. 99.
2. Belytschko, T., Lu, Y.Y. and Gu, L. (1994), "Element free Galerkin methods", Int. J. Numer. Meth. Eng., Vol. 37, p. 229.
3. Belytschko, T., Krongauz, Y., Organ, D., Fleming, M. and Krysl, P. (1996), "Meshless methods: an overview and recent developments", Comput. Meth. Appl. Mech. Eng., Vol. 139, p. 3.
4. Bonet, J. and Kulasegaram, S. (2000), "Correction and stabilization of smooth particle hydrodynamics methods with applications in metal forming simulations", Int. J. Numer. Meth. Eng., Vol. 47, p. 1189.
5. Chen, C. and Kobayashi, S. (1978), "Rigid plastic finite element analysis of ring compression", Applications of Numerical Methods to Forming Processes, ASME-AMD, Vol. 28, p. 163.
6. Chen, J.S., Wang, H.P. and Liu, W.K. (1999), "Meshfree method with enhanced boundary condition treatment for metal forming simulation", The 1999 NSF Design and Manufacturing Grantees Conference, Queen Mary, USA.
7. Chen, J.S., Pan, C., Wu, C.T. and Roque, C. (1998a), "A Lagrangian reproducing kernel particle method for metal forming analysis", Comp. Mechanics, Vol. 21, p. 289.
8. Chen, J.S., Roque, C., Pan, C. and Button, S.T. (1998b), "Analysis of metal forming process based on meshless method", J. Mat. Proc. Technology, Vol. 80, p. 642.
9. Chen, J.S., Yoon, S., Wang, H.P. and Liu, W.K. (2000), "An improvement reproducing kernel particle method for nearly incompressible hyper-elastic solids", Comput. Meth. Appl. Mech. Eng., Vol. 181, p. 117.
10. Duarte, C.A. and Oden, J.T. (1996), "An h-p adaptive method using clouds", Comput. Meth. Appl. Mech. Eng., Vol. 139, p. 237.
11. Dolbow, J. and Belytschko, T. (1999), "Volumetric locking in the element free Galerkin method", Int. J. Numer. Meth. Eng., Vol. 46, p. 925.
12. Gingold, R.A. and Monaghan, J.J. (1977), "Smoothed particle hydrodynamics: theory and application to non-spherical stars", Mthly. Notices. R. Astron. Soc., Vol. 181, p. 375.
13. Günther, F.C. and Liu, W.K. (1998), "Implementation of boundary conditions for meshless methods", Comp. Meth. Appl. Mech. Eng., Vol. 163, p. 205.
14. Jun, S., Liu, W.K. and Belytschko, T. (1998), "Explicit reproducing kernel particle methods for large deformation problems", Int. J. Numer. Meth. Eng., Vol. 41, p. 137.
15. Kulasegaram, S. (1999) "Development of particle based meshless method with applications in metal forming simulations", PhD thesis University of Wales, Swansea.
16. Lahoti, G.D., Akgerman, N., Oh, S.I. and Altan, T. (1980) "Computer-aided analysis of metal flow and stresses in plate rolling", J. Mech. Work. Tech., Vol. 4, p. 105.
17. Li, G.J. and Kobayashi, S. (1982) "Spread analysis in rolling by the rigid-plastic finite element method", in Pittman, J.F.T., Wood, R.D., Alexander, J.M. and Zienkiewicz, O.C. (Eds), Numerical Methods in Industrial Forming Processes, Pineridge Press, Swansea.
18. Liu, X.H. (1985), "Experiments and analysis by rigid-plastic FEM on the process of rolling H-beam with tensions on a universal mill" PhD thesis, North-Eastern University, China (in Chinese).
19. Li, S. and Liu, W.K. (2000) "Numerical simulations of strain localization in inelastic solids using mesh-free methods", Int. J. Numer. Meth. Eng., Vol. 48, p. 1285.
20. Li, S.F. and Liu, W.K. (2002) "Meshfree and particle methods and their applications", Applied Mechanics Review, Vol. 55, p. 1.
21. Liu, W.K., Jun, S. and Zhang, Y.F. (1995a), "Reproducing kernel particle methods", Int. J. Numer. Methods Fluids, Vol. 20, p. 1081.
22. Liu, W.K., Jun, S., Li, S., Andee, J. and Belytschko, T. (1995b), "Reproducing kernel particle methods for structural dynamics", Int. J. Numer. Meth. Eng., Vol. 38, p. 1655.
23. Lucy, L.B. (1977), "A numerical approach to the testing of the fission hypothesis", The Astron. J., Vol. 82, p. 1013.
24. Melenk, J.M. and Babuska, I. (1996) "The partition of unity finite element method: basic theory and applications", Comput. Meth. Appl. Mech. Eng., Vol. 139, p. 289.
25. Mori, K., Oyane, M. and Osakada, K. (1980), "Some problems and its treatment techniques in rigid-plastic finite element method - research on rigid-plastic finite element method", J. Japan Soc. Tech. Plast., Vol. 21, p. 593.
26. Nayroles, B., Touzot, G. and Villon, P. (1992), "Generalizing the finite element method: diffusive approximation and diffuse elements", Comput. Mech., Vol. 10, p. 307.
27. Onate, E., Idelson, S., Zienkiewicz, O.C. and Taylor, R.L. (1996), "A stabilized finite point method for analysis of fluid mechanics problems", Comput. Meth. Appl. Mech. Eng., Vol. 139, p. 315.
28. Osakada, K., Nakano, J. and Mori, K. (1982) "Finite element method for rigid-plastic analysis of metal forming - formulation for finite deformation", Int. J. Mech. Sci., Vol. 24, p. 459.
29. Qian, D., Li, S. and Cao, J. (2000), "3D simulation of manufacturing process by a meshfree contact algorithm", 20th Int. Congress of IUTAM, August 2000, Chicago IL.
30. Simonetti, G. and Cardona, A. (2000), "Metods sin malla para resolver la ecuacion de conduccion de calor", Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria, Vol. 16, pp. 33, (in Spanish).
31. Song, N., Qian, D., Cao, J., Liu, W.K. and Li, S. (2001), "Effective model for prediction of springback in flaging", ASME J. Eng. Mater. Technol., Vol. 123, p. 456.
32. Wagner, G.J. and Liu, W.K. (2000), "Application of essential boundary conditions in mesh-free methods: a corrected collocation method", Int. J. Numer. Meth. Eng., Vol. 47, p. 1367.
33. Xiong, S.W., Rodrigues, J.M.C. and Martins, P.A.F. (2002a) "Simulation of plane strain rolling using the element free Galerkin method", 2nd ICFG Workshop on Process Simulation in Metal Forming Industry, Padova, Italy.
34. Xiong, S.W., Rodrigues, J.M.C. and Martins, P.A.F. (2002b) "Three-dimensional modelling of the vertical-horizontal rolling process", Finite Elements in Analysis and Design (in press).
35. Xiong, S.W., Liu, W.K., Cao, J., Rodrigues, J.M.C. and Martins, P.A.F. (2003) "On the utlization of the reproducing kernel particle method for the numerical simulation of plane strain rolling", Int. J. Mach. Tools and Manuf., Vol. 43, p. 89.
36. Yagawa, G. and Furukawa, T. (2000) "Recent developments of free mesh method", Int. J. Numer. Meth. Eng., Vol. 47, p. 1419.
37. Yoon, S.P. and Chen, J.S. (2002) "Accelerated meshfree method for metal forming simulation", Finite Elements in Analysis and Design, Vol. 38, p. 937.
38. Zhang, L., Wagner, G.J. and Liu, W.K. (2002), "A parallelized meshfree method with boundary enrichment for large-scale CFD", J. Computational Physics, Vol. 176, p. 483.