Laser beam welding of high-nitrogen-containing austenitic stainless steel

Welding Journal (Miami, Fla)

Volumn 78, Issue 7, 1999, Pages 245-s

  Iamboliev, T ^a   Zumbilev, A ^a   Kalev, L ^e   Christov, S ^b   Ianev, V ^c   Stang, R G ^d  

^a TECHNICAL UNIVERSITY OF SOFIA   (Bulgaria)

^b BULGARIAN ACADEMY OF SCIENCES   (Bulgaria)

^c Optical Technology Institute   (Bulgaria)

^d University of Washington   (United States)

^e NONE

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; CORROSION RESISTANCE; DEGRADATION; DUCTILITY; HEAT AFFECTED ZONE; MECHANICAL PROPERTIES; METALLOGRAPHIC MICROSTRUCTURE; NITROGEN; STAINLESS STEEL; TENSILE STRENGTH; WELDS; YIELD STRESS;

ARGON SHIELDING; BASE METAL; NITROGEN CONTAINING AUSTENITIC STAINLESS STEEL; ULTIMATE TENSILE STRENGTH; WELD METAL; WELD PROPERTIES;

LASER BEAM WELDING;

EID: 0345533903     PISSN: 00432296     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (41)

1. Morris, J. W., Jr., and Dalder, E. N. 1985. Cryogenic structural materials for superconducting magnets. Journal of Metals 37(10): 24-33.
2. Ogawa, T., and Koseki, T. 1988. Weldability of newly developed austenitic alloys for cryogenic service: Part II: High nitrogen stainless steel weld metal. Welding Journal 67(8): 8-s to 17-s.
3. Espy, R. H. 1982. Weldability of N strengthened stainless steels. Welding Journal 61(5): 149-s to 156-s.
4. Ogawa, T., Suzuki, K., and Zaizen, T. 1984. The weldability of nitrogen containing austenitic stainless steels. Part II - Porosity, cracking and creep properties. Welding Journal 63(7): 213-s to 223-s.
5. Rashev, C. 1981. Alloyed steel processing. Moskow, Metalurgiia, pp. 245-260.
6. Menon, R., and Kotecki, D. 1992. Literature review - nitrogen in stainless steel weld metal. WRC Bulletin 369, 142-160.
7. Gumpel, P., and Michel, E. 1986. Uber den Einfluss der Elemente Si und N auf einigen Eigenschaften von austenitischen chemisch beständigen Stahlen. Thyssen Edelstahl Techn. Ber. 12(2): 181.
8. Folkhard, E. 1988. Welding metallurgy of stainless steels, Springer Verlag, Wien.
9. Sakamoto, T., Nakagawa, Y., and Yamauchi, I. 1987. Effect of manganese on the cryogenic properties of high nitrogen containing austenitic stainless steels. Nippon Steel Corp., RF&D Laboratories - II report.
10. Wedl, W., and Kohl, H. 1979. Intergranular corrosion and tensile test data of high Cr and N alloyed austenitic steels. Berg-und Huttenm. Mh. 124: 508-524.
11. Kazenov, N., Yushchenko, K., and Soloha, A. 1988. Weldability of overequilibrium nitrogen containing steels. Avtomaticheskaya svarka (3): 23-28, Moscow, Russia.
12. Yushchenko, K., Soloha, A., and Kazenov, N. 1988. Study of the weldability of austenitic nitrogen containing steels. Avtomaticheskaya svarka (4): 6-10, Moscow, Russia.
13. Lundin, C. 1990. Materials and their weldability for the power generation industry. Advanced Joining Technologies, Proc. of the IIW. T. North, ed. Chapman and Hall, London, pp. 210-218.
14. Zelev, A., Simeonova, B., and Sterev, S. 1984. Alloy systems for SMAW electrodes. Zavaryavane (4):2-5. Sofia, Bulgaria.
15. Kalev, L., Krustev, G., Kalev, K., Ushev, V., and Kalev, H. 1984. Electron beam welding of nitrogen containing stainless steel CrMnN 14-15. Zavaryavane (2): 11-13. Sofia, Bulgaria.
16. Lundin, C. D., and Qiao, C. Y. P. 1992. Fusion zone and heat-affected zone microstructure in high nitrogen stain less steel. International Trends in Welding Science and Technology. Ed. S. A. David and J. M. Vitek. Proc. of the 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, Tenn. pp. 247-251.
17. Ogawa, T., and Koseki, T. 1987. Weldability of newly developed austenitic alloys for cryogenic service: part I - Up-to-date overview of welding technology. Welding Journal 66(11): 332-s to 341-s.
18. Ogawa, T., Koseki, T., Ohkita, S., and Nakajima, H. 1990. 4 K properties of high nitrogen stainless steel weldments. Welding Journal 69(6): 205-s to 212-s.
19. Kalev, L., Chalakov, A., and Hristov, S. 1991. Electrode for SMAW of steel CrMnN18-12. Doc IIW Comm. IX-H-240/91.
20. Grigoriianz, A. G. 1989. Laser welding of metals. Moscow, Visshaia shkola, pp. 37-38.
21. Erochin, A. A. 1960. Kinetic of the interaction between the molten metal, gases and slag during arc welding. Svarochnoe Proizvodstvo (11): 4-11. Russia.
22. Yushchenko, K., Kazennov, N., Soloha, A., Romarin, Y., and Kaliniuk, N. 1988. N degassing kinetic in welding of high N steels. Avtomaticheskaia svarka (7): 17-23.
23. Averin, V., Revikin, A., and Fedorchenko, V. 1976. N in metals. Moscow, Metallurgiia, p. 223.
24. Brooks, J. A. 1975. Weldability of high nitrogen, high manganese austenitic stainless steel. Welding Journal 54(6): 189-s to 195-s.
25. Suutala, N. 1982. Effect of manganese and N on the solidification mode in ASS welds. Met. Trans. A, 13A, 2121-2130.
26. Szumachowski, E. R., and Kotecki, D. J. 1984. Effect of manganese on stainless steel weld metal ferrite. Welding Journal 63(5): 156-s to 161-s.
27. Bulgarian State Standard BDS 7039-85, Evaluation of Intergranular Corrosion Resistance.
28. Bulgarian State Standard BDS 7906-70, Evaluation of General Corrosion Resistance.
29. Flemings, M. 1974. Solidification Processing. McCraw-Hill, New York, N.Y. p. 58.
30. Kalev, L., and Christov, S. 1993. Influence of N on the austenizing and the weldability of steel CrMn 18.12. Proc. of the 1st Conf. on High Nitrogen Steels '93, Institute of Metalphysics, Kiev, part 2: 404-408.
31. Iamboliev, T. 1996. GTAW of N containing stainless steel. Proc. of the Intern. Congress on Stainless Steels '96, Dusseldorf. Ed. VDEh, pp. 275-276.
32. Wyndiga, A. 1979. Control of delta ferrite content in austenitic steel welds by means of nitrogen. Przeglad Spawalnictwa 31(5): 12-16.
33. Cieslak, M. J., Ritter, A. M., and Savage, W. 1982. Solidification cracking and analytical electron microscopy of ASS weld metals. Welding Journal 61(1): 1-s to 8-s.
34. David, S. A., Vitek, J. M., and Hebble, T. L. 1987. Effect of rapid solidification on stainless steel weld metal. Microstructures and its implications on the Schaeffler diagram. Welding Journal 66(10): 289-s to 300-s.
35. Katayama, S., and Matsunawa, A. 1984. Solidification microstructure of laser welded stainless steels. Proc. of Mater. Processing Symposium, Laser Institute of America, ICALEO, Vol. 44: 60-67.
36. Lippold, J. S. Centerline cracking in deep penetration electron beam welds in type 304L stainless steel. Welding Journal 64(5): 127-s to 136-s.
37. Kou, S., and Le, Y. 1982. The effect of quenching on the solidification structure and transformation behaviour of stainless steel welds. Metall. Trans. A, 13A: 1141-1152.
38. Venkataraman, S., and Devletian, J. H. 1988. Rapid solidification of stainless steel by capacitor discharge welding. Welding Journal 67(6): 111-s to 118-s.
39. Chan, J. V., Sunwoo, A., and Morris, J., Jr. 1990. High Mn-steel weldment mechanical properties at 4.2 K. Welding Journal 67(1): 30-s to 38-s.
40. Pridancev, M. V., Talov, N. P., and Levin, F. L. 1969. High strength austenitic steels. Metallurgiia, p. 246.
41. Ogawa, T., Aoki, S., Sakamoto, T., and Zaizen, T. 1982. The weldability of nitrogen containing austenitic stainless steel: Part I -Chloride pitting corrosion resistance. Welding Journal 61 (5): 139-s to 148-s.