The recently developed European flaw assessment procedure SINTAP is applied to 31 thin sheets made of six different materials and loaded in tension, bending, and biaxial tension;Bruchmechanisches bewerten dünnwandiger strukturen - Analytische simulation des stabilen rissfortschritts in dünnwandigen strukturen mittels SINTAP

Materialpruefung/Materials Testing

Volumn 45, Issue 12, 2003, Pages 519-525

  Zerbst, Uwe ^a   Schödel, Manfred ^b,c  

^a Saxonian Academy of Sciences   (Germany)

^b FH Coburg   (Australia)

^c DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING (DEFORMATION); CRACK PROPAGATION; DEFECTS; LOAD LIMITS; LOAD TESTING; NUMERICAL METHODS; STANDARDS; TENSILE STRESS; THICKNESS MEASUREMENT; THIN FILMS; CRACK TIPS;

BIAXIAL TENSION; FLAW ASSESSMENT; LOAD CARRYING CAPACITY; TENSION; THIN SHEETS;

SHEET METAL; THIN WALLED STRUCTURES;

BASIC EQUATIONS; BEST ESTIMATES; BIAXIAL TENSIONS; CRACK EXTENSION; CRACK LENGTH; DRAFT STANDARD; FLAW ASSESSMENT; LIGAMENT LENGTHS;

EID: 0345412553     PISSN: 00255300     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (21)

1. SINTAP: Structural Integrity Assessment Procedure Final Revision, EU-Project BE 95-1462. Brite Euram Programme, 1999
2. Zerbst, U.; Koçak, M.; Hodulak, L.: Grundlinien einer europäischen Fehlerbewertungsprozedur (SINTAP), DVM, 31, Tagung des AK Bruchvorgänge, Darmstadt, DVM-Bericht 231, 193-211, Nachdruck in Materialprüfung 41 (1999), 367-74
3. Zerbst, U.; Wiesner, C.; Koçak, M.; Hodulak L.: SINTAP: Entwurf einer vereinheitlichten europäischen Fehlerbewertungsprozedur - eine Einführung, GKSS-Bericht (1999) E/65
4. Zerbst, U.; Langenberg, P.: Die industrielle Anwendung bruchmechanischer Konzepte vor dem Hintergrund internationaler Bewertungsvorschriften und Regelwerke, Materialprüfung 43 (2000), 331-53
5. FITNET: European Fitnet for Service Network: www.eurofitnit.org
6. Newman Jr., J. C.; James, M. A.; Zerbst, U.: A review of the CTOA/CTOD fracture criterion, Engineering Fracture Mechanics 70 (2002), 371-85
7. 5 as an operational definition of the CTOD and its practical use, ASTM STP 1256 (1995), 763-78, American Society for Testing and Materials, West Conshohocken
8. 5 measurement technique, Engineering Fracture Mechanics 70 (2002), 417-26
9. BS 7448, Teil 1: Fracture Mechanics Toughness Tests. Method for Determination of KIc, Critical CTOD and Critical J Values of Metallic Materials, British Standards Institution, 1991
10. 5 to CTOD δBS and J-integral for 3PB- and CT-specimens, Engineering Fracture Mechanics 63 (1999), 573-89
11. ISO Document No. ISI/TC 164/SC-4-N413, Metallic Materials - Method of Test for the Determination of Resistance to Stable Crack Extension Using Specimens of Low Constraint, 8th Draft, 2001
12. Schwalbe, K.-H.; Zerbst, U.: Bruchmechanische Kennwerte bei geringer Dehnungsbehinderung - Normungsaktivitäten bei ASTM und ISO, Materialprüfung 44 (2002), 307-312
13. Heerens, J.; Schwalbe, K.-H.: R-curve testing and its relevance to structural assessment, Fatigue and Fracture of Engineering Materials and Structures 21 (1998), 1259-1271
14. Schwalbe, K.-H.; Heerens, J.; Zerbst, U.; Koçak, M.: EFAM-GTP 02, The GKSS Procedure for Determining the Fracture Behaviour of Materials, Second Edition, GKSS Research Centre Geesthacht, Geesthacht, 2002
15. Schödel, M.; Zerbst, U.: Application of the European Flaw Assessment procedure SINTAP to Thin Wall Structures. Analytical Assessment Levels, Engineering Fracture Mechanics, im Druck
16. Schödel, M.; Heerens, J.: FE-Simulation von stabilem Rissfortschritt in dünnwandigen Strukturen mit Hilfe des Rissspitzenöffnungswinkels CTOA, 35. Tagung des AK Bruchvorgänge, Freiburg, in diesem Band
17. Lin, G.; Cornec, A.; Schwalbe, K.-H.: Three-dimensional finite element simulation of crack extension in aluminium alloy 2024FC, Fatigue & Fracture of Engng. Mat. & Struct. 21 (1998), 1159-1173
18. Cornec, A.; Baustian, K.; Schwalbe, K.-H.: Lange Risswiderstandskurven und ETM-Anwendung bei dünnen Aluminium-blechen, GKSS Bericht (1994) E/58, GKSS Forschungszentrum, Geesthacht
19. Schwalbe, K.-H.; Cornec, A.; Baustian, K.: Application of fracture mechanics principles to austenitic steels, Int. J. Pres Ves. & Piping 65 (1996), 193-207
20. Hellmann, D.; Schwalbe, K.-H.: Geometry and size effects on J-R and δ-R curves under plane stress conditions, ASTM STP 833 (1984), 577-605, American Society for Testing and Materials, Philadelphia
21. Newman, J. C.; Schivakumar, K. N.; McCabe, D. E.: Finite element fracture simulation of A533B steel sheet specimens, in: Blauel, J. G.; Schwalbe, K.-H. (Hg.), Defect Assessment in Components - Fundamentals and Applications, ESIS/EGF 9, Mechanical Engineering Publ., London (1991), 117-126