Effect of single and double austenitization treatments on the microstructure and mechanical properties of 16Cr-2Ni steel

Journal of Materials Engineering and Performance

Volumn 8, Issue 3, 1999, Pages 385-393

  Balan, K P ^a   Venugopal Reddy, A ^a   Sarma, D S ^b  

^a DEFENCE METALLURGICAL RESEARCH LABORATORY   (India)

^b BANARAS HINDU UNIVERSITY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; CARBIDES; CHROMIUM ALLOYS; DISSOLUTION; GRAIN SIZE AND SHAPE; HIGH TEMPERATURE EFFECTS; MARTENSITE; METALLOGRAPHIC MICROSTRUCTURE; PRECIPITATION (CHEMICAL); STRENGTH OF MATERIALS; TEMPERING; TOUGHNESS;

DOUBLE AUSTENITIZATION;

STAINLESS STEEL;

EID: 0345148925     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1361/105994999770346963     Document Type: Article

References (22)

1. "The Mechanical and Physical Properties of British Standard En. Steels," Vol 3, En 57, B.S. 970-1955, J. Woolman and R.A. Mottram, Ed., The British Iron & Steel Research Association, Pergamon Press, p 257-273
2. "British Standard Aerospace Series: Specification for High Chromium-Nickel Corrosion-Resisting Steel Billets, Bars, Forgings and Parts (880-1080 MPa: Limiting Ruling Section 100 min)," B.S. 5S 80:1976, British Standard Institution, AMD 4480, March 1984
3. P.D. Harvey, Ed., Engineering Properties of Steels, American Society for Metals, 1982, p 357
4. A. Brownrigg, Transformation Characteristics of Type 431 Stainless Steel, Heat Treatment '76, Conf. Proc., Stratford-Upon Avon, 1976, p 86-93
5. L. Ning, D. Zhonggang, and H. Nenggen, Effect of Heat Treatment on Microstructure and Mechanical Properties of Martensitic-Ferritic Stainless Steel Containing 17% Cr and 2% Ni, Mater. Sci. Technol., Vol 7, Nov 1991, p 1057-1062
6. K.P. Balan, A. Venugopal Reddy, and D.S. Sarma, Effect of Austenitization Temperature on Microstructure and Hardness of 16Cr-2Ni Martensitic Stainless Steel, unpublished work
7. B.V. Narasimha Rao and G. Thomas, Design of Fe/4Cr/0.4C Martensitic Steels Eliminating Quench Cracking, Mater. Sci. Eng., Vol 20, 1975, p 195-202
8. B.V. Narasimha Rao and G. Thomas, Structure Property Relations and The Design of Fe-4Cr-C Base Structural Steels for High Strength and Toughness, Metall. Trans. A, Vol 11, March 1980, p 441-457
9. M. Sarikaya, B.G. Steinberg, and G. Thomas, Optimization of Fe/Cr/C Base Structural Steels for Improved Strength and Toughness, Metall. Trans. A, Vol 13, Dec 1982, p 2227-2237
10. Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, Annual Book of ASTM Standards, Vol 03.01, E23-88, ASTM, 1990, p 197-212
11. Standard Practice For X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation, Annual Book of ASTM Standards, Vol 03.01, E975-84, ASTM 1990, p 753-757
12. R.W.K. Honeycombe and H.K.D.H. Bhadeshia, Steels - Microstructure and Properties, 2nd ed., Edward Arnold, 1995, p 103
13. W.C. Leslie and R.L. Miller, Trans. ASM, Vol 57, 1964, p 972
14. R.P. Brobst and G. Krauss, The Effect of Austenite Grain Size on Microcracking in Martensite of an Fe-1.22C Alloy, Metall. Trans. A, Vol 5, 1974, p 457-462
15. H.K.D.H. Bhadeshia and D.V. Edmonds, Tempered Martensite Embrittlement: Role of Retained Austenite and Cementite, Met. Sci., June 1979, p 325-334
16. P.J. Grobner and V. Biss, Microstructure-Strength Relations in Hardenable Stainless Steel with 16Pct.Cr, 1.5 Pct.Mo and 5Pct.Ni, Metall. Trans. A, Vol 15, July 1984, p 1379-1387
17. K.J. Irvine and F.B. Pickering, High Strength 12% Chromium Steels, Metallurgical Developments in High Alloy Steels, The Iron and Steel Institute, 1964, p 63-77
18. B.R. Banerjee, J.J. Hauser, and J.M. Capenos, Fine Structure and Properties of a 12-Cr MoWV Martensitic Stainless Steel, STP 369, ASTM, April 1965, p 291-298
19. F.B. Pickering, Physical Metallurgical Development of Stainless Steels, Stainless Steels '84, The Institute of Metals, London, 1985, p 2-22
20. G.E. Dieter, Mechanical Metallurgy, 3rd ed., McGraw Hill Book Company, 1988, p 263
21. R.H. Vanstone, T.B. Cox, J.R. Low, Jr., and J.A. Psioda, Int. Met. Rev., Vol 30 (No. 4), 1985, p 157
22. E. Chang, C.Y. Chang, and C.D. Liu, The Effects of Double Austenitization on the Mechanical Properties of a 0.34C Containing Low Alloy Ni-Cr-Mo-V Steel. Metall. Trans. A, Vol 25. March 1994, p 545-555