Cement Kiln Dust in Controlled Low-strength Materials

ACI Materials Journal

Volumn 100, Issue 6, 2003, Pages 455-462

  Pierce, Charles E ^a   Tripathi, Himanshu ^a   Brown, Travis W ^a  

^a University of South Carolina   (United States)

Author keywords

Cement kiln; Compressive strength; Controlled low strength cementitious material; Flowable consistency

Indexed keywords

CEMENT KILNS;

BINDERS; DENSITY (SPECIFIC GRAVITY); HARDENING; KILNS; PORTLAND CEMENT; STRAIN; STRENGTH OF MATERIALS; STRESS ANALYSIS;

DUST;

EID: 0345014829     PISSN: 0889325X     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (34)

1. ACI Committee 229, 1999, "Controlled Low-Strength Materials (ACI 229R-99)," American Concrete Institute, Farmington Hills, Mich., 15 pp.
2. ASTM C 33-99, 1999, "Standard Specification for Concrete Aggregates," Annual Book of ASTM Standards: Concrete and Aggregates, West Conshohocken, Pa., 8 pp.
3. ASTM C 150-00, 2000, "Standard Specification for Portland Cement," Annual Book of ASTM Standards: Concrete and Aggregates, West Conshohocken, Pa.
4. ASTM C 109/C 109M-99, 1999, "Standard Test Method for Compressive Strength of Hydraulic Cement Mortars," Annual Book of ASTM Standards: Cement; Lime; Gypsum, West Conshohocken, Pa., 6 pp.
5. ASTM C 305-99, 1999, "Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency," Annual Book of ASTM Standards: Cement; Lime; Gypsum, West Conshohocken, Pa., 3 pp.
6. ASTM C 617-98, 1998, "Standard Practice for Capping Cylindrical Concrete Specimens," Annual Book of ASTM Standards: Concrete and Aggregates, West Conshohocken, Pa., 5 pp.
7. ASTM C 778-00, 2000, "Standard Specification for Standard Sand," Annual Book of ASTM Standards: Cement; Lime; Gypsum, West Conshohocken, Pa., 3 pp.
8. ASTM C 940-81, 1981, "Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplace-Aggregate Concrete in the Laboratory," Annual Book of ASTM Standards: Concrete and Aggregates, West Conshohocken, Pa.
9. ASTM D 4832-95, 1995, "Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders," Annual Book of ASTM Standards: Soil and Rock, West Conshohocken, Pa., 4 pp.
10. ASTM D 5971-96, 1996, "Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material," Annual Book of ASTM Standards: Soil and Rock, West Conshohocken, Pa., 2 pp.
11. ASTM D 6103-97, 1997, "Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)," Annual Book of ASTM Standards: Soil and Rock, West Conshohocken, Pa., 3 pp.
12. Baghdadi, Z. A.; Fatani, M. N.; and Sabban, N. A., 1995, "Soil Modification by Cement Kiln Dust," Journal of Materials in Civil Engineering, ASCE, V. 7, No. 4, pp. 218-222.
13. Davis, T. A., and Hoods, D. B., 1974, "Study of the State of the Art of Disposal and Utilization of Waste Kiln Dust from the Cement Industry," Report of the U.S. EPA, Grant No. R-801872, Southern Research Institute, Birmingham, Ala.
14. Digioia, A. M., Jr., and Brendal, G. F., 1992, "Fly Ash Design Manual for Road and Site Applications, Volume 2: Slurried Placement," EPRI Report TR-100472, Electric and Power Research Institute, 204 pp.
15. Duncan, J. M., and Buchignani, A. L., 1973, "Failure of Underwater Slope in San Francisco Bay," Journal of the Soil Mechanics and Foundations Division, ASCE, V. 99, No. SM9, pp. 687-703.
16. Dyer, T. D.; Halliday, J. E.; and Dhir, R. K., 1999, "Investigation of the Hydration Chemistry of Ternary Blends Containing Cement Kiln Dust," Journal of Materials Science, Kluwer Academic Publishers, Dordrecht, the Netherlands, V. 34, No. 20, pp. 4975-4983.
17. Freer-Hewish, R. J.; Ghataora, G. S.; and Niazi, Y., 1999, "Stabilization of Desert Sand with Cement Kiln Dust plus Chemical Additives in Desert Road Construction," Proceedings of the Institution of Civil Engineers, Transport, V. 135, No. 1, pp. 29-36.
18. Gassman, S. L.; Pierce, C. E.; and Schroeder, A. J., 2001, "Effects of Prolonged Mixing and Retempering on Properties of Controlled Low-Strength Material (CLSM)," ACI Materials Journal, V. 98, No. 2, Mar.-Apr., pp. 194-199.
19. Hoopes, R. J., 1998, "Engineering Properties of Air-Modified Controlled Low-Strength Material," The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch, eds., ASTM International, West Conshohocken, Pa., pp. 87-101.
20. Jager, R. G.; Esser, G.; and Knofel, D., 1993, "Development of Compressive Strength and Porosity of Some Regulated Set Cements (RSCS) Both Made from Rotary Kiln- and Laboratory Oven Clinker-Hydrated at 20 °C and 5 °C," Cement and Concrete Research, V. 23, No. 3, pp. 700-710.
21. Kurdi, A.; Awad, A.; Kassim, M.; and El-Zaafraney, M., 1996, "Properties and Usage of Cement Kiln Dust in Concrete," Alexandria Engineering Journal, V. 35, No. 5, pp. 209-222.
22. MacKay, M. H., and Emery, J. J., 1994, "Stabilization/ Solidification of Contaminated Soils and Sludges Using Cementitious Systems: Selected Case Histories," Transportation Research Record, Transportation Research Board, Washington, D.C., No. 1458, pp. 67-72.
23. Makroum, H. A., 1994, "Disposal of Bypass Dust," World Cement, V. 25, No. 10, pp. 17-21.
24. Mullarky, J. I., 1998, "Long-Term Strength Gain of Controlled Low-Strength Materials," The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch, eds., ASTM International, West Conshohocken, Pa., pp. 102-107.
25. Naval Facilities Engineering Command (NAVFAC), 1986, Soil Mechanics Design Manual, V. 7.01, Alexandria, Va., 348 pp.
26. Pons, F.; Landwermeyer, J. S.; and Kerns, L., 1998, "Development of Engineering Properties for Regular and Quick-Set Flowable Fill," The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, A. K. Howard and J. L. Hitch, eds., ASTM International, West Conshohocken, Pa., pp. 67-86.
27. Ramakrishnan, V., 1986, "Evaluation of Kiln Dust in Concrete," Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, Proceedings of the 2nd International Conference on Concrete, SP-91; V. 1, V. M. Malhotra, ed., American Concrete Institute, Farmington Hills, Mich., pp. 821-839.
28. SCDOT, 1994, "Flowable Fill," Supplemental Specifications, South Carolina Department of Transportation Specifications Manual, Columbia, S.C.
29. Schroeder, A. J., 2000, "The Effects of Variations in Mixing Time and Mix Water Content on Controlled Low-Strength Materials," MS thesis, University of South Carolina, Columbia, S.C., 132 pp.
30. Shoaib, M. M.; Balaha, M. M.; and Abdel-Rahman, A. G., 2000, "Influence of Cement Kiln Dust Substitution on the Mechanical Properties of Concrete," Cement and Concrete Research, V. 30, pp. 371-377.
31. Tripathi, H.; Pierce, C. E.; Gassman, S. L.; and Brown, T. W., 2004, "Methods for Field and Laboratory Measurement of Flowability and Setting Time of CLSM," Innovations in Controlled Low-Strength Material (Flowable Fill), ASTM STP 1459, J. L. Hitch, A. K. Howard, and W. P. Bass, eds., ASTM International, West Conshohocken, Pa. (in press)
32. U.S. Environmental Protection Agency, 1993, Report to Congress on Cement Kiln Dust, EPA 530-R-94-001, 275 pp.
33. Wang, K.; Konsta-Gdoutos, M. S.; and Shah, S. P., 2002, "Hydration, Rheology, and Strength of Ordinary Portland Cement (OPC)-Cement Kiln Dust (CKD)-Slag Binders," ACI Materials Journal, V. 99, No. 2, Mar.-Apr., pp. 173-179.
34. Zhu, J-H.; Zaman, M.; and Laguros, J. G., 1999, "Resilient Modulus and Microstructure of Cement Kiln Dust Stabilized Base/Subbase Aggregate," Soils and Foundations, Japanese Geotechnical Society, V. 39, No. 6, pp. 33-42.