A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions

Continuum Mechanics and Thermodynamics

Volumn 15, Issue 6, 2003, Pages 539-570

  Altenbach, H ^a   Naumenko, K ^a   Zhilin, P A ^b  

^a MARTIN LUTHER UNIVERSITY HALLE WITTENBERG   (Germany)

^b PETER THE GREAT ST PETERSBURG POLYTECHNIC UNIVERSITY   (Russian Federation)

Author keywords

Injection molding; Micro polar theory; Suspensions

Indexed keywords

EID: 0344982873     PISSN: 09351175     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00161-003-0133-5     Document Type: Article

References (45)

1. Advani, S. G., Tucker, C. L.: The use of tensors to describe and predict fiber orientation in short fibers composites. J. Rheol. 31, 751-784 (1987)
2. Advani, S. G., Tucker, C. L.: Closure approximations for three-dimensional structure tensors. J. Rheol. 34, 367-386 (1990)
3. Altan, M. C., Rao, B. N.: Closed-form solution for the orientation field in a center-gated disk. J. Rheol. 39, 581-599 (1995)
4. Altan, M. C., Subbiah, S., Güçeri, S. I., Pipes, R. B.: Numerical prediction of three-dimensional fiber orientation in Hele-Shaw Flows. Polym. Eng. Sci. 30, 848-859 (1990)
5. Altenbach, J., Altenbach, H.: Einführung in die Kontinuumsmechanik. Teubner Studienbücher Mechanik. Stuttgart: Teubner (1994)
6. Batchelor, G. K.: The stress system in a suspension of force free particles. J. Fluid Mech. 41, 545-570 (1970)
7. Bay, R. S., Tucker, C. L.: Fiber orientation in simple injection moldings. Part 1: theory and numerical methods. Polym. Comp. 13, 317-331 (1992)
8. Bay, R. S., Tucker, C. L.: Fiber orientation in simple injection moldings. Part 2: experimental results. Polym. Comp. 13, 332-341 (1992)
9. Brenner, H., Condiff, D. W.: Transport mechanics of orientable particles III. Arbitrary particles. Rheol. Acta 41, 228-274 (1971)
10. Chung, S. T., Kwon, T. H.: Numerical simulation of fiber orientation in injection molding of short-fiber reinforced thermoplastics. Polym. Eng. Sci. 35, 604-618 (1995)
11. Cintra, J. S., Tucker, C. L.: Orthotropic closure approximations for flow-induced fiber orientation. J. Rheol. 39, 1095-1122 (1995)
12. Dinh, S. M., Armstrong, R. C.: A rheological equation of state for semiconcentrated fiber suspensions. J. Rheol. 28, 207-227 (1984)
13. Doi, M., Edwards, S. F.: The Theory of Polymer Dynamics. Oxford et al.: Oxford University Press (1988)
14. Dupret, F., Couniot, A., Mal, O., Vanderschuren, L., Verhoyen, O.: Modelling and simulation of injection molding. In: Siginer, D. A., Kee, D. D., Chhabra, R. P. (Eds.): Advances in the Flow and Rheology of Non-Newtonian Fluids. Amsterdam et al.: Elsevier, pp. 939-1010 (1999)
15. Dupret, F., Verleye, V.: Modelling of the flow of fiber suspensions in narrow gaps. In: Siginer, D. A., Kee, D. D., Chhabra, R. P. (Eds.): Advances in the Flow and Rheology of Non-Newtonian Fluids. Amsterdam et al.: Elsevier, pp. 1347-1398 (1999)
16. Ericksen, J. L.: Anisotropic fluids. Arch. Rational Mech. Anal. 3, 231-237 (1960)
17. Ericksen, J. L.: Transversely isotropic fluids. Kolloid-Zeitschrift 173, 117-122 (1960)
18. Eringen, A. C.: Continuum theory of dense rigid suspensions. Rheologica Acta 30, 23-32 (1991)
19. Eringen, A. C.: Microcontinuum Field Theories. II:Fluent Media. New York et al.: Springer (2001)
20. Faria, S. H.: Mixtures with continuous diversity: general theory and application to polymer solutions. Continuum Mech. Thermodyn. 13, 91-120 (2001)
21. Giesekus, H.: Phänomelogische Rheologie. Berlin et al.: Springer (1994)
22. Glaser, S., v Diest, K.: Berechnungsverfahren für GFK-Bauteile. Kunststoffe 88, 537-542 (1988)
23. Halmos, P. R.: Measure Theory. New York et al.: Springer (1974)
24. Hegler, R. P.: Faserorientierung beim Verarbeiten kurzfaserverstärkter Thermoplaste. Kunststoffe 74, 271-277 (1984)
25. Huilgol, R. R., Phan-Thien, N.: Fluid Mechanics of Viscoelasticity. Amsterdam et al.: Elsevier (1997)
26. Jeffery, G. B.: The motion of ellipsoidal particles immersed in a viscous fluid. Proc. R. Soc. London A 102, 161-179 (1922)
27. Kennedy, P.: Flow Analysis of Injection Molds. Munich et al.: Hanser Publishers (1995)
28. Lurie, A. I.: Nonlinear Theory of Elasticity. Amsterdam: North-Holland (1990)
29. Menning, G.: Werkzeuge für die Kunststoffverarbeitung. München et al.: Carl Hanser Verlag (1995)
30. Michaeli, W.: Plastics Processing. Munich et al.: Hanser Publishers (1995)
31. Munganga, J. M. W., Reddy, B. D., Diatezua, K. J.: Aspects of the thermodynamic stability of fibre suspension flows. J. of Non-Newtonian Fluid. Mech. 92, 135-150 (2000)
32. Palmov, V. A.: Vibrations of Elasto-Plastic Bodies. Berlin et al.: Springer (1998)
33. Petrie, C. J. S.: The rheology of fibre suspensions. J. Non-Newtonian Fluid Mech. 87, 369-402 (1999)
34. Probstein, R. F.: Physicochemical Hydrodynamics. New York et al.: John Wiley and Sons (1994)
35. Ranganathan, S., Advani, S. G.: A Simultaneous solution for flow and fiber orientation in axisymmetric diverging radial flow. J. of Non-Newtonian Fluid. Mech. 47, 107-136 (1993)
36. Saito, M., Kukula, S., Kataoka, Y., Miyata, T.: Practical use of statistically modified laminate model for injection moldings. Material Science and Engineering A 285, 280-287 (2000)
37. Schmachtenberg, E., Yazici, N. M., Schröder, O.: Untersuchung des Langzeitfestigkeitsverhaltens von Pumpenbauteilen aus Kunststoff. Abschlußbericht, AIF Forschungsvorhaben, Auftraggeber: WILO GmbH Dortmund, Universität Essen, Institut für Kunststofftechnik und Kunststoffmaschinen (2000)
38. Truesdell, C. A.: Rational Termodynamics. New York et al.: Springer (1984)
39. Tucker, C. L., Advani, G.: Processing of short-fiber systems. In: Advani, S. G. (Ed.): Flow and Rheology in Polymer Composites Manufacturing. Amsterdam et al.: Elsevier, pp. 147-202 (1994)
40. Vincent, M., Agassant, J. F.: Experimental study and calculations of short glass fiber orientation in a center gated molded disc. Polym. Comp. 7, 76-83 (1986)
41. Whiteside, B. R., Coates, P. D., Hine, P. J., Duckett, R. A.: Glass fibre orientation within injection moulded automotive pedal. Simulation and experimental studies. Plastics, Rubber and Composites 29, 38-45 (2000)
42. Zhilin, P. A.: Mechanics of Deformable Directed Surfaces. Int. J. Solids Structures 12, 635-648 (1976)
43. Zhilin, P. A.: A New Approach to the Analysis of Free Rotations of Rigid Bodies. ZAMM 76, 187-204 (1996)
44. Zhilin, P. A.: The basic equtions of the inelastic media. In: Indeitsev, D. A. (Ed.): Actual Problems in Mechanics. St. Petersburg: Institute for Problems in Mechanical Engineering of Russian Academy of Sciences, pp. 14-58 (2000) (in Russian)
45. Zhilin, P. A.: Vectors and second rank tensors in 3D-space. St. Petersburg: Nestor (2001) (in Russian)