Fundamental research on hobbing of austempered ductile iron gear (influence of graphite particle on machinability)

JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing

Volumn 46, Issue 3, 2003, Pages 1160-1170

  Matsuoka, Hironori ^a   Tsuda, Yoshihiro ^a   Ono, Hajime ^b  

^a OITA UNIVERSITY   (Japan)

^b Yushiro Chemical Industry Co Ltd   (Japan)

Author keywords

Austempered ductile iron; Cutting; Finished surface roughness; Fly tool; Gear; Graphite particle; Hobbing; Tool life

Indexed keywords

ADHESION; CUTTING TOOLS; DUCTILITY; GRAPHITE; IRON; SURFACE ROUGHNESS;

TOOL WEAR;

GEARS;

GRAPHITE; HOBBING; MACHINABILITY; SURFACE ROUGHNESS; TOOL WEAR; WEAR DEBRIS;

EID: 0344552954     PISSN: 13447653     EISSN: None     Source Type: Journal    
DOI: 10.1299/jsmec.46.1160     Document Type: Article

References (26)

1. Harding, R.A., Austempered Ductile Irons-Gears, Materials & Design, Vol. 6, No. 4 (1985), pp. 177-184.
2. Okazaki, K., Asai, H. and Kusunki, H., Application of High-Performance Ductile Cast Iron to Automotive Parts, Automotive Technology, (in Japanese), Vol. 43, No. 6 (1989), pp. 19-24.
3. Oumoto, T. and Nakanishi, K., Present Situation of Practical Application of ADI and Subject for a Future Study (3rd Volume), Mechanical Engineering, (in Japanese), Vol. 38, No. 14 (1990), pp. 106-110.
4. Tanaka, I. and Kawabata, T., Application of ADI to Power-plant Parts, Automotive Technology, (in Japanese), Vol. 45, No. 6 (1991), pp. 79-85.
5. Inoue, K., Kato, M., Suzuki, H. and Kawahara, G., Bending Strength of Spur Gear Teeth Made of Austempering Ductile Iron, Trans. Jpn. Soc. Mech. Eng., (in Japanese), Vol. 55, No. 512 (1989), pp. 999-1003.
6. Oda, T., Yano, M., Goka, M. and Koide, T., Bending Fatigue Strength of Austempered Ductile Iron Gears, Trans. Jpn. Soc. Mech. Eng., (in Japanese), Vol. 56, No. 532 (1990), pp. 3416-3419.
7. Ariura, Y., Nakanishi, T., Ueno, T., Yano, M. and Goka, M., Research on Surface- Hardened Nodular Graphite Cast Iron Gear-Surface Durability of Austempered Ductile Iron Gear-, Prepr. of Symposium Gear and Mechanism of Transmission, Jpn. Soc. Mech. Eng., (in Japanese), No. 890-58 (1989), pp. 74-77.
8. Tsukamoto, N., Taki, T. and Katoo, M., Pitting Strength with Gast Iron Used as the Gear Material, Trans. Jpn. Soc. Mech. Eng., (in Japanese), Vol. 54, No. 508, C (1988), pp. 3043-3047.
9. Ueno, T., Yano, M., Inoue, S. and Goka, M., Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron (Cutting Tests Using High Speed Steel Fly-Tools), JSME Int. J., Vol. 32, No. 3 (1989), pp. 475-479.
10. Inoue, S., Ueno, T., Yano, M. and Goka, M., Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron (On the Most Suitable Clearance Angle of the Hob), JSME Int. J., Vol. 33, No. 4 (1990), pp. 603-607
11. Inoue, S., Ueno, T., Yano, M. and Goka, M., Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron (3rd Report, On the Hobbing Condition Clearance), Trans. Jpn. Soc. Mech. Eng., (in Japanese), Vol. 56, No. 532, C (1990), pp. 3426-3429.
12. Matsuoka, H., Katsuki, A., Yano, M. and Inoue, S., Fundamental Research on Hobbing of Austempered Ductile Iron Gear, Proc. 35th Jpn. Cong. Matel. Res., (1992), pp. 69-74.
13. Matsuoka, H., Katsuki, A., Yano, M. and Inoue, S., Fundamental Research on Hobbing of Austempered Ductile Iron Gear (Optimum Hobbing Conditions and the Effect of Cutting Oil and Compressed Air Blowing), Trans. Jpn. Soc. Mech. Eng., (in Japanese), Vol. 59, No. 562, C (1993), pp. 1878-1883.
14. Katsuki, A. and Matsuoka, H., Correspondence in Tool Wear between Hobbing and Cutting Using a Fly-Tool, Reports of the Faculty of Engineering Oita University, (in Japanese), No. 23 (1991), pp. 7-13.
15. Kiso, H. and Taguchi, T., On Machinability of ADI, Preprint of 114th Meeting of Japan Society of Cast Iron, (in Japanese), (1988), pp. 102-103.
16. Aida, T., Ikawa, N., Iwata, K., Okamura, K., Nakajima, T. and Hoshi, T., Cutting Technology, (in Japanese), (1973), pp. 284-285, Corona Publishing Co., Ltd.
17. Hiroi, S. and Nakayama, Y., Cutting Fluids and Grinding Fluids, (in Japanese), (1982), pp. 4-7, Saiwaishobou.
18. Kiso, H., Koyama, M. and Taguchi, T., Machinability of Austempered Ductile Iron, Casting, (in Japanese), Vol. 61, No. 9 (1989), pp. 615-619.
19. Ishihara, Y., Goka, M., Otsuka, K., Yasuda, H. and Nakano, E., Work Hardening on Austempered Ductile Iron, Technical Report of Hitachi Metals, (in Japanese), No. 2 (1986), pp. 59-66.
20. Oumoto, T. and Nakanishi, K., Present Situation of Practical Application of ADI and Subject for a Future Study (1st volume), Mechanical Engineering, (in Japanese), Vol. 38, No. 11 (1990), pp. 99-102.
21. Kita, A., Austempered Ductile Iron Having Much Possibility, Casting, Forging and Heat Treatment, (in Japanese), No. 2 (1992), pp. 7-13.
22. Harada, S., Kobayashi, T., Noguti, T., Suzuki, H. and Yano, M., Strength Evaluation of Spheroidal Graphite Cast Iron, (1999), pp. 158-159, AGNE Gijutsu Center.
23. Oumoto, T. and Nakanishi, K., Present Situation of Practical Application of ADI and Subject for a Future Study (2nd volume), Mechanical Engineering, (in Japanese), Vol. 38, No. 13 (1990), pp. 104-111.
24. Ishihara, Y., Goka, M., Nakano, E. and Mimata, T., Machinability of Austempered Ductile Iron, Preprint of 108th Meeting of Japan Society of Cast Iron, (in Japanese), (1985), p. 9.
25. The Japan Institute of Metals and The Iron and Steel Institute of Japan, Iron and Steel as an Engineering Material Handbook, (in Japanese), (1974), pp, 27-30, Maruzen.
26. The Japan Institute of Metals and The Iron and Steel Institute of Japan, Iron and Steel as an Engineering Material Handbook, (in Japanese), (1974), pp. 735-736, Maruzen.