Artificial aging and shear deformation behaviour of 6022 aluminium alloy

International Journal of Plasticity

Volumn 20, Issue 3, 2004, Pages 427-445

  Gracio, J J ^a   Barlat, F ^a,b   Rauch, E F ^c   Jones, P T ^a   Neto, V F ^a   Lopes, A B ^d  

^a UNIVERSITY OF AVEIRO   (Portugal)

^b ALCOA TECHNICAL CENTER   (United States)

^c UNIV GRENOBLE ALPES   (France)

^d UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

Aging; Aluminium; Bauschinger effect; Hardness testing; Shear testing; TEM

Indexed keywords

AGING OF MATERIALS; HARDNESS; HEAT TREATMENT; MICROSTRUCTURE; SHEAR DEFORMATION; STRAIN HARDENING; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION ANALYSIS;

ARTIFICIAL AGING;

ALUMINUM ALLOYS;

EID: 0344464927     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(03)00095-0     Document Type: Article

References (44)

1. Barlat F., Ferreira Duarte J.M., Gracio J.J., Lopes A.B., Rauch E.F. Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample. Int. J. Plasticity. 19:2003;1215-1244.
2. Barlat F., Glazov M.V., Brem J.C., Lege D.J. A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys. Int. J. Plasticity. 18:2002;919-939.
3. Bryant J.D. The effects of preaging treatments on aging kinetics and mechanical properties in AA6111 aluminum autobody sheet, Metall. Mater. Trans. A. 30:1999;1999-2006.
4. Chun B.K., Jinn J.T., Lee J.K. Modeling the Bauschinger effect for sheet metals, part I: theory. Int. J. Plasticity. 18:2002;571-595.
5. Chun B.K., Jinn J.T., Lee J.K. Modeling the Bauschinger effect for sheet metals, part II: applications. Int. J. Plasticity. 18:2002;597-616.
6. Cleveland R.M., Ghosh A.K. Inelastic effects on springback in metals. Int. J. Plasticity. 18:2002;633-659.
7. Dorward R.C., Bouvier C. A rationalization of factors affecting strength, ductility and toughness of AA6061-type Al-Mg-Si-(Cu) alloys. Mater. Sci. Eng. A. 254:1998;33-44.
8. Edwards G.A., Stiller K., Dunlop G.L., Couper M.J. The precipitation sequence in Al-Mg-Si alloys. Acta Mater. 46:1998;3893-3904.
9. El-Danaf E., Kalidindi S.R., Doherty R.D. Influence of deformation path on the strain hardening behavior and microstructure evolution of low SFE FCC metals, Int. J. Plasticity. 17:2001;1245-1265.
10. Fjeldly A., Roven H.J., Rauch E. Shear deformation properties of extruded AlZnMg alloys. Scripta Materialia. 38:1998;709-714.
11. Geng L., Wagoner R.H. The effect of plastic anisotropy and hardening on sheet springback. Int. J. Mech. Sci. 44:2002;123-148.
12. Gupta A.K., Lloyd D.J., Court S.A. Precipitation hardening processes in an Al-0.40% Mg-1.3% Si-0.25% Fe aluminum alloy. Mater. Sci. Eng. A. 301:2001;140-146.
13. Hasegawa T., Yakou T. The effect of strain reversal and thermal recovery on stress vs strain behavior in aluminum. Scripta Metall. 14:1980;1083-1087.
14. Hasegawa T., Yakou T., Karashima S. Deformation behavior and dislocation structures upon stress reversal in polycrystalline aluminum. Mater. Sci. Eng. 20:1975;267-276.
15. Hatch J.E. Aluminum: Properties and Physical Metallurgy. 1984;American Society for Metals, Metals Park, OH, USA.
16. ̄strain relationship. Int. J. Plasticity. 18:2002;203-229.
17. Kamat R.G., Butler J.F., Murtha S.J., Bovard F.S. Alloy 6022-T4E29 for automotive sheet applications. Mater. Sci. Forum. 396:2002;1591-1596.
18. Langlois L., Berveiller M. Overall softening and anisotropy related with the formation and evolution of dislocation cell structures. Int. J. Plasticity. 19:2003;599-624.
19. Li F., Hoferlin E., Van Bael A., Van Houtte P., Teodosiu C. Finite element modeling of plastic anisotropy induced by texture and strain-path change. Int. J. Plasticity. 19:2003;647-674.
20. Lopes A.B., Barlat F., Gracio J.J., Ferreira Duarte J.F., Rauch E.F. Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear. Int. J. Plasticity. 19:2003;1-22.
21. Man C.S. On the r-value of textured sheet metals. Int. J. Plasticity. 18:2002;1683-1706.
22. Matsuda K., Naoi T., Fujii K., Uetani Y., Sato T., Kamio A., Ikeno S. Crystal structure of the beta ″ phase in an Al-1.0mass%ME2Si-0.4mass%Sialloy. Mater. Sci. Eng. A. 262:1999;232-237.
23. Miao W.F., Laughlin D.E. Precipitation hardening in aluminum alloy 6022. Scripta Materialia. 40:1999;873-878.
24. Miao W.F., Laughlin D.E. A differential scanning calorimetry study of aluminum alloy 6111 with different pre-aging treatments. J. Mater. Sci. Lett. 19:2000;201-203.
25. Miao W.F., Laughlin D.E. Effects of Cu content and preaging on precipitation characteristics in aluminum alloy 6022. Metall. Mater. Trans. A. 31:2000;361-371.
26. Moons T., Ratchev P., DeSmet P., Verlinden B., VanHoutte P. A comparative study of two Al-Mg-Si alloys for automotive applications. Scripta Materialia. 35:1996;939-945.
27. Murayama M., Hono K., Miao W.F., Laughlin D.E. The effect of Cu additions on the precipitation kinetics in an Al-Mg-Si alloy with excess Si. Metall. Mater. Trans. A. 32:2001;239-246.
28. Murayama M., Hono K. Pre-precipitate clusters and precipitation processes in Al-Mg-Si alloys. Acta Mater. 47:1999;1537-1548.
29. Murayama M., Hono K., Saga M., Kikuchi M. Atom probe studies on the early stages of precipitation in Al-Mg-Si alloys. Mater. Sci. Eng. A. 250:1998;127-132.
30. Murtha S.J. New 6XXX aluminum alloy for automotive body sheet applications. J. Mater. Manuf. SAE Trans. 104:1995;657-666.
31. Nakamachi E., Xie C.L., Morimoto H., Morita K., Yokoyama N. Formability assessment of FCC aluminum alloy sheet by using elastic/crystalline viscoplastic finite element analysis. Int. J. Plasticity. 18:2002;617-632.
32. Rauch E.F., Gracio J.J., Barlat F., Lopes A.B., Ferreira Duarte J. Hardening behavior and structural evolution upon strain reversal of aluminum alloys. Scripta Materialia. 46:2002;881-886.
33. Rauch E.F. The flow law of mild steel under monotonic or complex strain path. Solid State Phenomena. 23-24:1993;317-448.
34. Rauch E.F. Plastic anisotropy of sheet metals determined by simple shear tests. Mater. Sci. Eng. A. 241:1998;179-183.
35. Siddiqui R.A., Abdullah H.A., Al-Belushi K.R. Influence of aging parameters on the mechanical properties of 6063 aluminium alloy. J. Mater. Process. Tech. 102:2000;234-240.
36. Takeda M., Ohkubo F., Shirai T., Fukui K. Stability of metastable phases and microstructures in the ageing process of Al-Mg-Si ternary alloys. J. Mater. Sci. 33:1998;2385-2390.
37. Tucu P., Wu P.D., Neale K.W. On the predictive capabilities of anisotropic yield criteria for metals undergoing shearing deformations. Int. J. Plasticity. 18:2002;1219-1236.
38. Urreta S.E., Louchet F., Ghilarducci A. Fracture behaviour of an Al-Mg-Si industrial alloy. Mater. Sci. Eng. A. 302:2001;300-307.
39. Van Houtte P., Delannay L., Kalidindi S.R. Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction. Int. J. Plasticity. 18:2002;359-377.
40. Wilson D.V. Reversible work-hardening in alloys of cubic metals. Acta Metall. 13:1965;807-814.
41. Yoshida F., Uemori T., Fujiwara K. Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain. Int. J. Plasticity. 18:2002;633-659.
42. Yoshida F., Uemori T. A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation. Int. J. Plasticity. 18:2002;661-686.
43. Zhen L., Kang S.B. The effect of pre-aging on microstructure and tensile properties of Al-Mg-Si alloys. Scripta Materialia. 36:1997;1089-1094.
44. Zhen L., Fei W.D., Kang S.B., Kim H.W. Precipitation behaviour of Al-Mg-Si alloys with high silicon content. J. Mater. Sci. 32:1997;1895-1902.