Instrumented indentation technique to measure flow properties: A novel way to enhance the accuracy of integrity assessment

Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE

Volumn 3, Issue , 2003, Pages 367-375

  Jang, Jae Il ^a   Choi, Yeol ^a   Lee, Yun Hee ^a   Lee, Jung Suk ^a   Kwon, Dongil ^a   Park, Joon ^b   Gao, Ming ^c   Kania, Richard ^d  

^a Seoul National University   (South Korea)

^b Frontics Inc   (South Korea)

^c GE Power Systems Oil and Gas   (United States)

^d Power Systems Oil and Gas   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK DETECTION; FAILURE ASSESSMENT DIAGRAM (FAD); STRUCTURAL INTEGRITY;

BOUNDARY CONDITIONS; CRACKS; DEFORMATION; FRACTURE TOUGHNESS; INDENTATION; STRAIN; TENSILE TESTING; WELDS;

STRUCTURAL ANALYSIS;

EID: 0344255772     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/OMAE2003-37494     Document Type: Conference Paper

References (24)

1. Zerbst U, Heerens J, and Schwalbe K-H, 2002, "The fracture behaviour of a welded tubular joint-an ESIS TC1.3 round robin on failure assessment methods Part I: experimental data base and brief summary of the results," Eng Frac Mech, Vol. 69, pp. 1093-110.
2. Milne I, Ainsworth RA, Dowling AR, and Stewart AT, 1988, " Background and validation of CEGB report R/H/R-6 revision 3." Int J Press Ves Piping, Vol. 32, pp. 105-96.
3. Ainsworth RA, Gutierrez-Solona F, and Ruiz Ocejo J, 2000, "Analysis levels within the SINTAP defect assessment procedure," Eng Fract Mech, Vol. 67, pp. 515-27.
4. Anderson TL and Osage DA, 2000, "API 579: a comprehensive fitness-for-service guide," Int J Press Ves Piping, Vol. 77, pp. 953-63.
5. R-6: Assessment of the integrity of structures containing defects, British Energy, R/H/R-6-Revision 3, 1998.
6. BS7910: Guide and methods for assessing the acceptability of flaws in fusion welded structures, British Standards Institution, 1999.
7. SINTAP: Structural Integrity Assessment Procedures for European Industries, Final Procedure, Brite-Euram Project Number BE95-1426, 1999.
8. API 579: Recommended practice for fitness for service, American Petroleum Institute, 2000.
9. Francis FA, 1976, "Phenomenological analysis of plastic spherical indentation," J Eng Mater Tech: Trans ASME, Vol. 98, pp. 272-81.
10. Oliver WC and Pharr GM, 1992, "An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiment," J Mater Res Vol. 7, pp. 1564-83.
11. Norbury AL and Samuel T, 1928, "The recovery and sinking-in or piling-up of material in the Brinell test, and the effects of these factors on the correlation of the Brinell with certain other hardness tests," Journal of Iron and Steel Institute, Vol. 117, pp. 673-87.
12. Hill R, FRS, Storåkers B, and Zdunek AB, 1989, "A theoretical study of the Brinell hardness test," Proc Royal Soc London, Vol. A423, pp. 301-30.
13. Ann JH and Kwon D, 2001, "Derivation of plastic stress-strain relationship from ball indentation: Examination of strain definition and pileup effect," J Mater Res, Vol. 16, pp. 3170-78.
14. Tabor D, 1951, The Hardness of Metals. Oxford Univ Press, Oxford, UK, pp. 79-83.
15. Dieter GE, 1988, Mechanical Metallurgy. McGraw-Hill, London, UK pp. 283-92.
16. ASTM E8-91: Standard test methods of tension testing of metallic materials. American Society for Testing and Materials, Philadelphia, PA, 1991
17. Choi Y, Ahn JH, Choi JK, Choo WY, and Kwon D, 2001, "Evaluation of Lúders strain by analyzing the deformation characteristics around the residual indentation in structural steel," J Kor Inst Met & Mater, Vol. 39, pp. 50-8.
18. Lee JS, Ju JB, Jang JI, Kim WS, Kho YT, and Kwon D, 2002, "Fitness-for-service assessment for crack-like flaws of the welded structure using failure assessment diagram," J Kor Inst Met & Mater, Vol. 40, pp. 1034-41.
19. Byun TS, Kim JW, and Hong JH, 1998, "A theoretical model for determination of fracture toughness of reactor pressure vessel steels in the transition region from automated ball indentation test," J Nucl Mater, Vol. 252, pp. 187-94.
20. Jang JI, Choi Y, Son D, Lee YH, Kwon D, and Kim JT, 2002, "Determination of new parameter for materials degradation using continuous indentation testing technique," Trans Kor Soc Mech Eng (KSME) A, Vol. 26 pp. 881-889.
21. Jang JI, Choi Y, Lee YH, Kwon D, Kim DJ, and Kim JT, 2003, "Nondestructive observation on tensile property change of hydrogen-exposed Cr-Mo-V steel HAZ using an instrumented indentation technique," J Mater Sci Lett, Vol. 22, pp. 499-502.
22. Mohandas T, Madhusudan Reddy G, and Satish Kumar B, 1999, "Heat affected zone softening in high-strength low-alloy steels," J Mat Proc Tech, Vol. 88 pp. 284-94
23. Ju JB, Lee JS, Jang JI, Kim WS, and Kwon D, 2002, "Metallurgical and mechanical features of API 5L X65 pipeline steel weldment," Proc 4th Inter Pipeline Conf (IPC2002), IPC02-27180 (Published on CD-ROM).
24. Jang JI, Son D, Lee YH, Choi Y, and Kwon D, 2003, "Assessing welding residual stress of A335 P12 steel welds before and after stress-relaxation annealing thorough instrumented indentation technique," Scripts Materialia Vol. 48, pp. 743-8.