Effect of cooling rate on the as-quenched microstructure and mechanical properties of HSLA-100 steel plates

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 34 A, Issue 11, 2003, Pages 2493-2504

  Dhua, S K ^a   Mukerjee, D ^a   Sarma, D S ^b  

^a STEEL AUTHORITY OF INDIA LIMITED   (India)

^b BANARAS HINDU UNIVERSITY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

ARSENIC; COOLING; COPPER; FRACTURE TOUGHNESS; METALLOGRAPHIC MICROSTRUCTURE; METALLOGRAPHIC PHASES; NIOBIUM; PHASE TRANSITIONS; PLATE METAL; QUENCHING; STRENGTH OF MATERIALS; TENSILE STRENGTH;

GRANULAR BAINITE; WATER QUENCHING;

STEEL;

EID: 0344118094     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-003-0009-0     Document Type: Article

References (33)

1. R.J. Jesseman and G.J. Murphy: J. Heat Treating, 1984, vol. 3, pp. 228-36.
2. M.T. Miglin, J.P. Hirth, A.R. Rosenfield, and W.A.T. Clark: Metall. Trans. A, 1986, vol. 17A, pp. 791-95.
3. G.E. Hicho, C.H. Brady, L.C. Smith, and R.J. Fields: J. Heat Treating, 1987, vol. 5, pp. 7-19.
4. Takashi Abe, Masayoshi Kurihara, and Histoshi Tagawa: Trans. Iron Steel Inst. Jpn. 1987, vol. 27, pp. 478-84.
5. G.E. Hicho and R.J. Fields: J. Heat Treating, 1988, vol. 6, pp. 77-85.
6. A.D. Wilson, E.G. Hamburg, D.J. Colvin, S.W. Thompson, and G. Krauss: Proc. Int. Conf. on Microalloyed HSLA Steel, Microalloying '88, ASM International, Metals Park, OH, 1988, pp. 259-75.
7. S.W. Thomson, D.J. Collins, and G. Krauss: Scripta Metall., 1988, vol. 22, pp. 1069-1074.
8. S.W. Thomson, D.J. Colvin, and G. Krauss: Metall. Trans. A., 1990, vol. 21A, pp. 1493-507.
9. S.S. Banadkouki Ghasemi, D. Yu, and D.P. Dunne: Iron Steel Inst. Jpn., 1996, vol. 36, pp. 61-67.
10. S.W. Thompson, D.J. Kolvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1573-88.
11. A.D. Wilson: J. Met., 1987, vol. 29, pp. 36-38.
12. S.W. Thompson, D.J. Kolvin, and G. Kraus: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1554-68.
13. S.K. Sen, A. Ray, R. Avtar, S.K. Dhua, P. Jha, P.P. Sengupta, and S. Jha: J. Mater. Eng. Performance, 1998, vol. 7, pp. 504-510.
14. I. LeMay and M.R. Krishnadev: Copper in Iron and Steel, I. LeMay and L.M Schetky, eds., John Wiley & Sons, New York, NY, 1982, pp. 5-43.
15. B.A. Graville: Proc. Int. Conf. on Welding of HSLA (Microalloyed) Structural Steels, ASM International, Metals Park, OH, 1978, pp. 85-101.
16. E.J. Czyryca: Key Engineering Materials, Trans Tech Publications, Aedermanns Switzerland, 1993, vols. 84-85, pp. 491-520.
17. E.J. Czyryca, R.E. Link, R.J. Wong, D.A. Aylor, T.W. Montemarano, and J.P. Gudas: Nav. Eng. J., 1990, May, pp. 63-82.
18. R.P. Foley and M.E. Fine: Proc. Int. Conf. on Processing, Microstructure and Properties of Microalloyed and Other Modern HSLA Steels, ISS, Warrendale, PA, 1991, pp. 315-30.
19. A.K. Lis, M. Mujahid, C.I. Garcia, and A.J. DeArdo: Speich Symp. Proc., ISS, Warrendale, 1992, pp. 29-38.
20. A.G. Fox, S. Mikalac, and M.G. Vassilaros: Speich Symp. Proc., ISS, Warrendale, PA, 1992, pp. 155-61.
21. J.W. Yoo, W.Y. Choo, and Y.M. Kim: Proc. Int. Conf. on Processing, Microstructures and Properties of Microalloyed and Other Modern HSLA Steels, ISS, Warrendale, PA, 1991, pp. 371-80.
22. M. Mujahid, A.K. Lis, C.I. Garcia, and A.J. DeArdo: J. Mater. Eng. Performance, 1998, vol. 7, pp. 247-57.
23. Guen Chul Hwang, Sunghak Lee, Jang Yong Yoo, and Wung Yng Choo: Mater. Sci. Eng., 1998, vol. A252, pp. 256-68.
24. S.K. Dhua, D. Mukerjee, and D. S. Sarma: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2259-70.
25. S.K. Dhua, Amitava Ray, and D.S. Sarma: Mater. Sci. Eng. A, 2001, vol. A318, pp. 197-210.
26. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817-29.
27. B.L. Bramfitt and J.G. Speer: Mechanical Working and Steel Processing Proc., 1989, pp. 443-54.
28. G.J.P. Buchi, J.H.R. Page, and M.P. Sidey: J. Iron Steel Inst., 1965, vol. 203, pp. 291-98.
29. W.E. Creswick: Commercial Development of a Rimmed Low Alloy Precipitation Hardening High Strength Steel, ISS Publication 104, Thonet Press, London, England, 1967, pp. 86-92.
30. G. Thomas: The Physical Metallurgy and Alloy Design of Dual Phase Steels, Frontiers in Materials Technologies, M.A. Meyers and O.T. Inal, eds., Elsevier Science Publishers, Amsterdam, 1985, p. 89.
31. M.R. Krishnadev, W.L. Zhang, and J.T. Bowker: Proc. Int. Symp. on Low-Carbon Steels for the 90's, R. Asfahani and G. Tither, eds., TMS, Warrendale, PA, 1993, pp. 501-09.
32. C. Shiga: Proc. Int. Conf. on the Metallurgy, Welding and Qualification of Microalloyed (HSLA) Steel Weldments, J.J. Hickey, D.G. Howder, and M.D. Randall, eds., AWS, Miami, Florida, 1990, pp. 327-50.
33. Zhang Shouhua, Zhang Hong, and Yuan Yi: Proc. Int. Conf. on HSLA Steels, Metallurgy and Applications, J.M. Gray, T. Ko, Zhang Shouhua, W. Baorong, and Xie Hishan, eds., ASM International, Metals Park, OH, 1986, pp. 113-20.