Deformation based temperature rise: A review

International Journal of Pressure Vessels and Piping

Volumn 80, Issue 10, 2003, Pages 673-687

  Pandey, K N ^a   Chand, Satish ^b  

^a KN Institute of Technology   (India)

^b MOTILAL NEHRU NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Heat dissipation; Heat generations; Sink; Source; Thermomechanical response

Indexed keywords

CYCLIC LOADS; DEFORMATION; ELASTICITY; PIPING SYSTEMS; PLASTICITY; TEMPERATURE MEASUREMENT;

THERMOMECHANICAL RESPONSE;

PRESSURE VESSELS;

DEFORMATION;

EID: 0344010045     PISSN: 03080161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijpvp.2003.07.001     Document Type: Review

References (65)

1. Zehnder AT. Model for the heating due to plastic work. Mech Res Commun 1991;18(1):23-8.
2. Zehnder AT, Babinsky E, Palmer T. Hydrid method for determining the fraction of plastic work converted to heat. Exp Mech 1998;38(4): 295-302.
3. Zehnder AT, Rosakis Ares J. On the temperature distribution at the vicinity of dynamically propagating cracks in 4340 steel. Mech Phys Solids 1991;30(3):385-413.
4. Zehnder AT, Rosakis Ares J. Temperature rise at the tip of dynamically propagating cracks: measurements using high-speed infrared detectors. In: Epstein J, editor. Experimental techniques in fracture. SEM'93, vol. III.; 1993. p. 125-69.
5. Kallivayalil JA, Zehnder AT. Measurement of temperature field induced by dynamic crack growth in beta-C titanium. Int J Fract 1994; 66:99-120.
6. Weichert R, Schonert K. Heat generation at the tip of a moving crack. J Mech Phys Solids 1978;26:151-61.
7. Wong AK, Kirby GC. A hybrid numerical experimental technique for determining the heat dissipated during low cycle fatigue. Engng Fract Mech 1990;37(3):493-504.
8. Stanley P, Chan WK. Quantitative stress analysis by means of the thermoelastic effect. J Strain Anal 1985;20(3):129-37.
9. Dulieu-Barton JM. Introduction to thermoelastic stress analysis Strain May 1999:35-9.
10. Dillon Jr. OW, Tauchert TR. The experimental technique for observing the temperatures due to the coupled thermoelastic effect. Int J Solids Struct 1966;2:385-91.
11. Harvey II DP, Bonenberger Jr. RJ, Wolla JM. Effects of sequential cyclic and monotonic loadings on damage accumulation in nickel 270. Int J Fatigue 1998;20(4):1998.
12. Harvey II DP, Bonenberger Jr. RJ. Detection of fatigue macrocracks in 1100 aluminium from thermomechanical data. Engng Fract Mech 2000;65:609-20.
13. Jacobsen TK, Sørensen BF, Brøndsted P. Measurement of uniform and localized heat dissipation induced by cyclic loading. Exp Mech 1998:289-94.
14. Bever MB, Holt DL, Titchener AL. The stored energy of cold work. Progress in materials science, New York: Pergamon Press; 1973. p. 17.
15. Fortes MA. The effect of strain rate on the stored and dissipation energies of cold work in tension. Scripta Metall 1977;7:549-52.
16. Korhonen AS, Kleemola HJ. Effects of strain rate and deformation heating in tensile testing. Metall Trans 1978;9AQ:979-86.
17. Gao Y, Wagoner RH. A simplified model of heat generation during the uniaxial tensile test. Metall Trans 1987;18A:1001-9.
18. Shockey DA, Kalthoff JF, Klemm W, Winkler S. Simultaneous measurement of stress intensity and toughness for fast running cracks in steel. Exp Mech 1983;June:140-5.
19. Montgomery DG. The temperature wave method of determinating fracture toughness values due to crack propagation. J Mater Sci 1975; 10:205-13.
20. Holmes JW, Shulter SF. Temperature rise during fatigue of fibre-reinforced ceramics. J Mater Sci Lett 1990;(9):1290-1.
21. Jordan EH, Sandor BI. Stress analysis from temperature data. J Test Eval 1978;6(6):325-31.
22. Tomlinson RA. Thermoelasticity for the analysis of crack tip stress fields: a review. Strain 1999;May:49-55.
23. Beghi MG, Bottani CE, Caglioti, Lenti A. Energy balance via thermal emission in copper under stress. Mater Lett 1988;6(4):133-7.
24. Rantsevich VB, Franyuk VA. Calculation of the steady state temperature field and thermal energy losses in samples undergoing fatigue. Problem Prochnosti 1976;1:102-4.
25. Rantsevich VB. Thermal detection of cracks in fatigue testing of parts. Defektoskopiya 1977;5:102-8.
26. Rice JR, Levy N. Local heating by plastic deformation at a crack tip. In: Argon AS, editor. The physics of strength and plasticity. Cambridge, MA: MIT Press; 1969. p. 277-92.
27. Pervin M. Theoretical prediction of temperature of temperature rise at the tip of a running crack. Int J Fract 1979;15(5).
28. Weichert R, Schonert K. On the temperature rise at the tip of a fast running crack. J Mech Phys Solids 1974;22:127-33.
29. Weichert R, Schonert K. Temperature distribution produced by a moving heat source. Q J Mech Appl Math 1978;XXXI(3): 363-79.
30. Li ZL, Yang JL, Lee H. Temperature fields near a running crack tip. Engng Fract Mech 1988;30(6):791-9.
31. Kuang ZB, Atluri SN. Temperature field due to a moving heat source: a moving mesh finite element analysis. Trans ASME J. of Applied Mechanics, 1985;52:274-280.
32. D̈oll W. An experimental study of the heat generated in the plastic region of a running crack in different polymeric materials. Engng Fract Mech 1973;5:259-68.
33. D̈oll W. Application of an energy balance and an energy method to dynamic crack propagation. Int J Fract 1976;12(4):595-605.
34. Wells AA. Weld Res 1953;7:34r-5r.
35. Manitz G. ̈Uber den Bruchvorgang bei verschiedenen Hochpolymeren, Dessertation, Universiẗat Freiburg, Germany; 1959.
36. Hopkinson B. Williams GT. The elastic hysteresis of steel. Proc R Soc, Lond 1912;87:10-15.
37. Harry R, Joubert F, Gomma A. Measuring the actual endurance limit on one specimen using a nondestructive method. J Engng Mater Technol 1981;103:71-6.
38. Haigh BP. Hysteresis in relation to cohesion anf fatigue. Trans Faraday Soc 1928;24:125-7.
39. Gurevich SE, Gaevoi AP. Method of experimentally determining rapture energy in cyclical (fatigue) loading. Zavodskaya Lab 1973;39: 1110-4.
40. Blotny R, Kaleta J. A method for determining the heat energy of the fatigue process in metals under uniaxial stress. Part 1. Determination of the amount of heat liberated from a fatigue-tested specimen. Int J Fatigue 1986;8(1):29-33.
41. Blot ny R, Kaleta J. A method for determining the heat energy of the fatigue process in metals under uniaxial stress. Part 2. Measurement of the temperature of a fatigue. Int J Fatigue 1986;8(1):35-8.
42. Romashov RV, Fedorov VV. Method of experimentally checking thermodynamic ideas on failure of a solid body during fatigue tests. Zavodskaya Lab 1975;41:229-32.
43. Jordan Eric H. Notch-root plastic response by temperature measurement. Exp Mech 1985;March:24-31.
44. Rajic N, Lam YC, Wong AK. Plastic zone size determination by temperature measurement. Trans ASME J Engng Mater Technol 1997;199:32-9.
45. Charles JA. Using the scanning infrared camera in experimental fatigue studies. Exp Mech 1975;April:133-8.
46. Rosa G La, Risitano A. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components. Int. J. of Fatigue 2000;22:65-73.
47. Lesniak JR, Boyce BR. A high speed differential thermography camera. In: Proc. SEM Spring Conf. Exp. Mech., Baltimore 1994;491-7.
48. Stanley P, Dulieu-Smith JM. The determination of crack tip parameters from themoelastic data. Exp Tech 1996;March:21-3.
49. Offermann S, Beaudoin JL, Bissieux C, Frick H. Thermoelastic stress analysis under nonadiabatic conditions. Exp Mech 1997;37(4):409-13.
50. Lin ST, Feng Z, Rowlands RE. Thermoelastic determination of stress intensity factors in orthotropic composites using the J-integral. Engng Fract Mech 1997;56(4):579-92.
51. Dulieu-Barton JM, Fulton MC, Stanley P. The analysis of thermoelastic isopathic data from crack tip stress fields. Fatigue Fract Engng Mater Struct 2000;23:301-13.
52. Dunn SA. On the effects of through thickness thermal conduction on stress measurements by thermoelastic techniques. Exp Mech 1993;33: 32-6.
53. Byrd LW, Haney MA. Thermoelastic stress analysis applied to fully reversed bending fatigue. Exp Mech 2000;40(1):10-14.
54. Rajic N, Wong AK, Lam YC. A thermomechanical technique for measuring residual stress. Exp Technol 1996;March/April:25-7.
55. Rajic N, Wong AK, Lam YC. A thermomechanical technique for measuring residual stress. Proceedings of SEM Spring Conference on Experimental Mechanics, Deaborn, Michigan, USA: 1993.
56. Wong AK, Dunn SA, Sparrow JW. Residual stress measurement by means of the thermoelastic effect. Nature 1988;332:613-5.
57. Wong AK, Sparrow JW, Dunn SA. On the revised theory of thermoelastic effect. J Phys Chem Solids 1988;49(4):395-400.
58. Hartley KA, Duffy J, Hawley RH. Measurement of the temperature profile during shear band formation in steels deforming at high strain rates. J Mech Phys Solids 1987;35(3):283-301.
59. Moss Gerald L, Pond Sr. RB. Inhomogeneous thermal changes in copper during plastic elongation. Metall Trans 1975;6A: 1223-35.
60. Reifsnider KL, Williams RS. Determination of fatigue related heat emission in composite materials. Exp Mech 1974;Dec: 479-85.
61. Fuller KNG, Fox PG, Field JE. The temperature rise at the tip of fast-moving cracks in glassy polymers. Proc R Soc, Lond A 1975;341: 537-57.
62. Atterno R, Ostberg G. Measurements of the temperature rise ahead of a fatigue crack. Int J Fract Mech 1971;7:122-4.
63. D̈oll W. Application of an energy balance and an energy method to dynamic crack propagation. Int J Fract 1976;12(4): 595-605.
64. Belgen MH. Structural stress measurements with an infrared radiometer. ISA Trans 1967;6:49-53.
65. Thompson(Lord Kelvin). On the dynamical theory of heat. Trans R Soc Edinburgh 1853;20:261-83.