J-R curves corrected by load-independent constraint parameter in ductile crack growth

Engineering Fracture Mechanics

Volumn 68, Issue 3, 2000, Pages 285-301

  Zhu, X K ^a   Jang, S K ^b  

^a University of South Carolina   (United States)

^b Mokpo Maritime University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

CONSTRAINT THEORY; DUCTILITY; FRACTURE TOUGHNESS; PLASTIC DEFORMATION; FRACTURE MECHANICS; STEEL;

CRACK GROWTH RESISTANCE CURVES;

CRACK PROPAGATION;

J RESISTANCE CURVES; TEARING MODULUS;

FRACTURE MECHANICS;

EID: 0343844125     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0013-7944(00)00100-4     Document Type: Article

References (42)

1. Alexander DJ. Fracture toughness measurements with subsize disk compact specimens. Small specimens test techniques applied to nuclear reactor vessel thermal annealing and plant life extension. ASTM STP 1204, American Society for Testing and Materials, Philadelphia, 1993. p. 130-142.
2. ASTM E 1820-99, Standard test method for measurement of fracture toughness. American Society for Testing and Materials, Philadelphia, 1999.
3. Betegon C, Hancock JW. Two parameter characterization of elastic-plastic crack-tip fields. J Appl Mech 1991;58:104-10.
4. Brocks W, Eberle A, Fricke S, Veith H. Large stable crack growth in fracture mechanics specimens. Nucl Engng Design 1994;151:387-400.
5. Brocks W, Schmitt W. The second parameter in J-R curves: constraint or triaxiality? Constraint effects in fracture theory and application, vol. 2. ASTM STP 1244, American Society for Testing and Materials, Philadelphia, 1995. p. 209-31.
6. Chao YJ, Yang S, Sutton MA. On the fracture of solids characterized by one or two parameters: theory and practice. J Mech Phys Solids 1994;42:629-47.
7. 2 dominance and size requirements. Int J Fract 1998;89:285-307.
8. Decamp K, Bauvineau L, Besson J, Pineau A. Size and geometry effects on ductile rupture of notched bars in a C-Mn steel: experiments and modeling. Int J Fract 1997;88:1-18.
9. Dodds Jr. RH, Shih CF, Anderson TL. Continuum and micromechanics treatment of constraint in fracture. Int J Fract 1993;64:101-33.
10. Dodds Jr RH, Ruggieri C, Koppenhoeffer KC. 3-D constraint effects on models for transferability of cleavage fracture toughness. Fatigue and Fracture Mechanics, vol. 28. ASTM STP 1321, American Society for Testing and Materials, Philadelphia, 1997. p. 179-97.
11. Eisele U, Roos E, Seidenfuss M, Silcher H. Determination of J-integral-based crack resistance curve and initiation values for the assessment of cracked large-scale specimens. Fracture Mechanics: 22nd symposium, vol. 1. ASTM STP 1133, American Society for Testing and Materials, Philadelphia, 1992. p. 37-59.
12. Elliot C, Emark M, Lucas GE, et al. Development of disk compact tension specimens and test techniques for HFIR irradiation. J Nucl Mater 1991;179(Part A):434-7.
13. Faleskog J. Effects of local constraint along three-dimensional crack fronts - a numerical and experimental investigation. J Mech Phys Solids 1995;43:447-93.
14. Goldman NJ, Hutchinson JW. Fully plastic crack problems: the center-cracked strip under plane strain. Int J Solids Struct 1975;11:575-91.
15. Gullerud AS, Dodds RH. J-Q and toughness scaling model solutions for M(T), DE(T), SE(B), SE(T), and C(T) specimens. Int J Fract 1995;72:R11-21.
16. Hancock JW, Reuter WG, Parks DM. Constraint and toughness parameterized by T, constraint effects in fracture. ASTM STP 1171, American society for Testing and Materials, Philadelphia, 1993. p. 21-40.
17. Haynes MJ, Gangloff RP. High resolution R-curve characterization of the fracture toughness of thin sheet aluminum alloys. J Testing Evaluation 1997;25:82-98.
18. Henry BS, Luxmoore AR, Sumpter JDG. Elastic-plastic fracture mechanics assessment of low constraint aluminium test specimens. Int J Fract 1996;81:217-34.
19. Jang SK, Zhu XK. Two-parameter characterization for the resistance curves of ductile crack growth. Trans Korea Soc Maritime Engng 1999;23:488-503.
20. Joyce JA. Private communication, 1998.
21. Joyce JA, Link RE. Effects of constraint on upper shelf fracture toughness. Fracture Mechanics, vol. 26. ASTM STP 1256, American Society for Testing and Materials, Philadelphia, 1995. p. 142-77.
22. Joyce JA, Link RE. Application of two-parameter elastic-plastic fracture mechanics to analysis of structures. Engng Fract Mech 1997;57:431-46.
23. IC value. Nucl Engng Design 1997;174:41-9.
24. Klemm W, Memhard D, Schmitt W. Experimental and numerical investigation of surface cracks in plates and pipes. In: Kussmaul K, editor. Fracture Mechanics Verification by Large-Scale Testing, EGF/ESIS8, 1991. p. 139-50.
25. Kordisch H, Sommer E, Schmitt W. The influence of triaxiality on stable crack growth. Nucl Engng Design 1989;112:27-35.
26. Marschall CW, Papaspyropoulos V, Landow MP. Evaluation of attempts to predict large-crack-growth J-R curves from small specimen tests. Nonlinear Fracture Mechanics, vol. 2 - Elastic Plastic Fracture. ASTM STP 995, American Society for Testing and Materials, Philadelphia, 1989. p. 123-43.
27. Needleman A, Tvergaard V. An analysis of ductile rupture modes at a crack tip. J Mech Phys Solids 1987;35:151-83.
28. O'Dowd NP. Applications of two parameter approaches in elastic-plastic fracture mechanics. Engng Fract Mech 1995;52:445-65.
29. O'Dowd NP, Shih CF. Family of crack-tip fields characterized by a triaxiality parameter - I. Structure of fields. J Mech Phys Solids 1991;39:989-1015.
30. O'Dowd NP, Shih CF. Family of crack-tip fields characterized by a triaxiality parameter - II. Fracture applications. J Mech Phys Solids 1992;40:939-63.
31. O'Dowd NP, Shih CF. Two-parameter fracture mechanics: theory and applications. Fracture Mechanics, vol. 24. ASTM STP 1207, American Society for Testing and Materials, Philadelphia, 1994. p. 21-47.
32. Pardoen T, Marchal Y, Delannay F. Thickness dependence of cracking resistance in thin aluminium plates. J Mech Phys Solids 1999;47:2093-123.
33. Roos E, Eisele U, Silcher H. Effect of stress state on the ductile fracture behavior of large scale specimens, constraint effects in fracture. ASTM STP 1171, American Society for Testing and Materials, Philadelphia, 1993. p. 41-63.
34. Rousselier G. Ductile fracture models and their potential in local approach of fracture. Nucl Engng Design 1987;105:97-111.
35. Shan GX, Kolednik O, Fischer FD. A numerical study on the crack growth behavior of a low and a high strength steel. Int J Fract 1996;78:335-46.
36. Xia L, Shih CF, Hutchinson JW. A computational approach to ductile crack growth under large scale yielding conditions. J Mech Phys Solids 1995;43:389-413.
37. Yan C, Mai YW. Effect of constraint on ductile crack growth and ductile-brittle fracture transition of a carbon steel. Int J Pres Vessels Piping 1997;73:167-73.
38. Yang S, Chao YJ, Sutton MA. Higher order asymptotic crack tip fields in a power-law hardening material. Engng Fract Mech 1993;45:1-20.
39. Yoon KK, Gross LB, Wade CS, VanDerSluys WA. Evaluation of disk-shaped compact specimen for determining J-R curves. Fracture Mechanics, vol. 26. ASTM STP 1256, American Society for Testing and Materials, Philadelphia, 1995. p. 272-83.
40. Yuan H, Brocks W. Quantification of constraint effects in elastic-plastic crack front fields. J Mech Phys Solids 1998;46:219-41.
41. Zhu XK, Chao YJ. Characterization of constraint of fully plastic crack-tip fields in non-hardening materials by the three-term solution. Int J Solids Struct 1999;36:4497-517.
42. 2 description to ductile crack growth. ASTM STP 1589, based on the 31st National Symposium on Fatigue and Fracture Mechanics, American Society for Testing and Materials, in press, 1999.