Advanced titanium-based alloys

Current Opinion in Solid State and Materials Science

Volumn 1, Issue 3, 1996, Pages 333-339

  Naka, Shigehisa ^a  

^a ONERA   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0342700915     PISSN: 13590286     EISSN: None     Source Type: Journal    
DOI: 10.1016/S1359-0286(96)80022-2     Document Type: Article

References (38)

1. Collings EW: The physical metallurgy of titanium alloys. Metals Park, Ohio: American Society for Metals; 1984.
2. Polmear IJ: Titanium alloys. In Light Alloys; Metallurgy of Light Metals. Edited by Polmear. London: Edward Arnold; 1981:162-209.
3. Blenkinsop PA: Advanced alloys and processes. In Titanium '92; Science and Technology. Edited by Froes FH, Caplan IL. Warrendale, Pennsylvania: TMS; 1993:15-26.
4. Bania PJ: Beta titanium alloys and their role in the titanium industry. JOM 1994, 46:16-19. This paper makes a brief but comprehensive review of β titanium alloys. The author describes the physical metallurgy of this class of alloys, the nature and applications of some alloys of the early days, and the recent trend in research and development of new alloys.
5. McCullough C, Valencia JJ, Levi CG, Mehrabian R: Phase equilibria and solidification in Ti-Al alloys. Acta Metall 1989, 37:1321-1336.
6. Kubaschewski-Von Goldbeck O: Phase diagrams. In Titanium: Physico-Chemical Properties of Its compounds and Alloys. Edited by Komarek KL. Vienna: International Atomic Energy Agency (IAEA); 1983:75-201.
7. Prandi B, Alheritière E, Schwartz F, Thomas M: β-CEZ, A high performance titanium alloy for aerospace engines. In Proceedings of the 6th World Conference on Titanium. Edited by Lacombe P, Tricot R, Béranger G. Les Ulis, France: Editions de Physique; 1989:811-818.
8. Ishikawa M, Kuboyama O, Niikura M, Ouchi C: Microstructure and mechanical properties relationship of β-rich α-β titanium alloy; SP-700. In Titanium '92; Science and Technology. Edited by Froes FH, Caplan IL. Warrendale, Pennsylvania: TMS; 1993:141-148.
9. Bania PJ, Parris WM: Beta 21S: a high temperature metastable beta titanium alloy. In Titanium 1990: Products and Applications. Dayton, Ohio: Titanium Development Association (TDA); 1990:784-792.
10. Upadhyaya D, Blackketter DM, Froes FH: Micromechanical prediction of the thermal stresses in sigma fiber (SiC)/β-21 S titanium composite: effect of coefficient of thermal expansion of the coating. In Titanium '92; Science and Technology. Edited by Froes FH, Caplan IL. Warrendale, Pennsylvania: TMS; 1993:2537-2544.
11. Blenkinsop PA: High temperature titanium alloys. In Designing with Titanium. London: The Institute of Metals; 1986:191-197.
12. O'Connell TE, Bania PJ: The wide processing window of Ti1100. In Titanium 1990: Products and Applications. Dayton, Ohio: TDA; 1990:794-803.
13. Naka S, Thomas M. Khan T: Overview: Potential and prospects of some intermetallic compounds for structural applications. Mater Sci Tech 1992, 8:291-298.
14. Rowe RG: Recent development in Ti-Al-Nb titanium aluminide alloys. In High Temperature Aluminides and Intermetallics. Edited by Whang SH, Liu CT, Pope DP, Stiegler JO. Warrendale, Pennsylvania: TMS; 1990:375-401.
15. 3Al+X (X=Nb, Mo, V, Ta, Fe) alloys. In Titanium '92; Science and Technology. Edited by Froes FH, Caplan IL. Warrendale, Pennsylvania: TMS; 1993:1243-1250.
16. 3Al-Nb alloy. Acta Metall 1988, 36:871-882.
17. 3Nb section of the Ti-Al-Nb system - I. Microstructural predictions based on a subgroup relation between phases. Acta Metall Mater 1994, 42:2323-2335. This paper may be very instructive to the readers interested in studying the precipitation of the orthorhombic phase (or O phase). The author describes possible paths for the constant composition coherent transformation of bcc or B2 high-temperature phases to low-temperature hep or orthorhombic phases in the Ti-Al-Nb system.
18. 3Nb section of the Ti-Al-Nb system - II. Experimental TEM study of microstructures. Acta Metall Mater 1994, 42:2337-2352.
19. 3Al-base alloy property comparison. In Synthesis, Processing and Modeling of Advanced Materials. Edited by Froes FH, Khan T. Aedermannsdorf: Trans Tech Publications; 1993:61-70.
20. Rowe RG: The effect of microstructure and composition on the creep behavior of O phase titanium aluminide alloys. In Proceedings of the 8th World Conference on Titanium. London: The Institute of Metals; 1996, in press.
21. Naka S, Marty M, Thomas M, Khan T: Variation in the degree of order and its influence on mechanical behavior in complex B2 aluminides of refractory metals. Mater Sci Eng 1995, A192/193:69-76.
22. Thomas M, Naka S, Khan T: On a very high room-temperature ductility obtained in B2 and/or O base titanium aluminides. In Proceedings of the 8th World Conference on Titanium. London: The Institute of Metals; 1996, in press.
23. 3Al based alloys. In Proceedings of the International Symposium on Structural Intermetallics. Edited by Darolia R, Lewandowski JJ, Liu CT, Martin PL, Miracle DB, Nathal MV. Warrendale, Pennsylvania: TMS; 1993:19-33.
24. Yamaguch M, Umakoshi Y: The deformation behaviour of intermetallic superlattice compounds. Progress Mater Sci 1990, 34:1-148.
25. 2 TiAl-based alloys. Scripta Metall Mater 1993, 28:1131-1136.
26. Austin CM, Kelly TJ: Progress in implementation of cast gamma titanium aluminide. In Gamma Titanium Aluminides. Edited by Kim YW, Wagner R, Yamaguchi M. Warrendale, Pennsylvania: TMS; 1995:21-32. This paper briefly describes the manufacturing process of LPT rotors, with blades made by casting of the GE TiAl-based alloy, as well as their engine testings, demonstrating a potential industrial application of titanium aluminides in the near future.
27. Kim YW: Intermetallic compound alloys based on gamma-titanium aluminide (TiAl). JOM 1989, 41:24-30.
28. 2 lamellar structure. This microstructure is the most important microstructural ingredient of the alloys of this category.
29. Denquin A, Naka S: Phase transformation mechanisms involved in two-phase TiAl-based alloys, Part 2 : Discontinuous coarsening and massive-type transformation. Acta Mater 1996, 44:353-365.
30. Kim YW, Dimiduk DM: Progress in the understanding of gamma titanium aluminides. JOM 1991, 43:40-47.
31. Kim YW: Ordered intermetallic alloys, part III: gamma titanium aluminides. JOM 1994, 46:30-40. This paper provides the most recent and complete review of TiAl-based titanium aluminides. The present status of research and development of this new class of materials is very clearly and thoroughly described.
32. Shibue K, Kim MK, Kumagai M: Microstructure study of Ti47.3at%Al-1.7at%Mn intermetallic compound fabricated by reactive-sintering. In Proceedings of the International Symposium on Intermetallic compounds - Structure and Mechanical Properties (JIMIS-6). Edited by Izumi O. Sendai: The Japan Institute of Metals; 1991:833-838.
33. Nakagawa YG, Matsuda K, Masaki S, Imamura R, Arai M: Analysis of cast TiAl properties for engine materials. In Gamma Titanium Aluminides. Edited by Kim YW, Wagner R, Yamaguchi M. Warrendale, Pennsylvania: TMS; 1995:415-424.
34. 2Cr on industrial scale. In Proceedings of the International Symposium on Structural Intermetallics. Edited by Darolia R, et al.. Warrendale, Pennsylvania: TMS; 1993:205-214.
35. 3Al lamellar microstructure in TiAl-Si alloys. In Acta Mater 1996, in press.
36. Blackburn MJ, Smith MP: Titanium aluminium alloys containing niobium, vanadium and molybdenum. US Patent No4,716,020, 1987.
37. Huang SC: Titanium aluminium alloys modified by chromium and niobium and method of preparation. US Patent No4,879,092, 1989.
38. Jain SK, Roessler JR: Titanium aluminide alloys. US Patent No5,296,056, 1994.