Modeling of stress corrosion cracking for high level radioactive-waste packages

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

Volumn 467, Issue , 2003, Pages 119-127

  Lu, S C ^a   Gordon, G M ^b   Andresen, P L ^c   Herrera, M L ^d  

^a LAWRENCE LIVERMORE NATIONAL LABORATORY   (United States)

^b AREVA NP   (France)

^c GE GLOBAL RESEARCH   (United States)

^d STRUCTURAL INTEGRITY ASSOCIATES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DELIQUESCENCE; RADIOACTIVE-WASTE PACKAGES;

COMPUTER SIMULATION; CORROSION RESISTANCE; CRACK PROPAGATION; MATHEMATICAL MODELS; PACKAGING; PROTECTIVE COATINGS; RESIDUAL STRESSES; STRESS CORROSION CRACKING; STRESS INTENSITY FACTORS; TENSILE STRESS;

RADIOACTIVE WASTE DISPOSAL;

EID: 0242694895     PISSN: 0277027X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/PVP2003-2139     Document Type: Conference Paper

References (16)

1. Andresen, P.L.; Emigh, P.W.; Young, L.M.; and Gordon, G.M. 2003. "Stress Corrosion Cracking Growth Rate Behavior of Alloy 22 (UNS N06022) in Concentrated Groudwater." Corrosion 2003. The annual conference and corrosion show sponsored by NACE International. Paper No. 03683.
2. Andresen, P.L. and Ford, F.P. 1985. "Modeling and Life Prediction of Stress Corrosion Cracking in Sensitized Steel in High Temperature Water." Predictive Capabilities in Environmentally Assisted Cracking. American Society of Mechanical Engineers (ASME) Publication PVP-Vol 99.17-38.
3. Andresen, P.L. and Ford, F.L. 1988. "Life Prediction by Mechanistic Modeling and System Monitoring of Environmental Cracking of Iron and Nickel Alloys in Aqueous Systems." Materials Science and Engineering, A103, 167-184.
4. ASM International. 1987. Corrosion. Volume 13 of Metals Handbook. 9th Edition.
5. ASME (American Society of Mechanical Engineers) 1969. Criteria of the ASME Boiler and Pressure Vessel Code for Design by Analysis in Section III and VIII, Division 2. The American Society of Mechanical Engineers. 1969, Library of Congress Catalog Card Number 56-3934.
6. BSC (Bechtel SAIC Company) 2001. Environment on the Surfaces of the Drip Shield and Waste Package Outer Barrier. ANL-EBS-MD-000001 REV 00 ICN 02. Bechtel SAIC Company, Las Vegas, Nevada.
7. BSC (Bechtel SAIC Company) 2003. Analysis of Mechanisms for Early Waste Package/Drip Shield Failure.
8. CAL-EBS-MD-000030 REV 00. Bechtel SAIC Company, Las Vegas, Nevada.
9. CRWMS M&O 1996. Waste Package Closure Weld Development Report. BBA000000-01717-2500-00006 REV 00. Civilian Radioactive Waste Management System (CRWMS) Management and Operation Contractor (M&O), Las Vegas, Nevada.
10. CRWMS M&O 2000. General Corrosion and Localized Corrosion of Waste Package Outer Barrier. ANL-EBS-MD-000003 REV 00. Civilian Radioactive Waste Management System (CRWMS) Management and Operation Contractor (M&O), Las Vegas, Nevada.
11. DOE (U.S. Department of Energy) 2001. Yucca Mountain Science and Engineering Report. DOE/RW-0539. Washington, D.C.: U.S. Department of Energy, Office of Civilian Radioactive Waste Management. May 2001.
12. Ford, F.P. and Andresen, P.L. 1988. "Development and Use of a Predictive Model of Crack Propagation in 304/316L, A533B/A508 and Inconel 600/182 Alloys in 288°C Water." Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, [Proceedings of the Third International Symposium, Traverse City, Michigan, August 30-September 3, 1987], Theus, G.J. and Weeks, J.R., eds. Pages 798 - 800.
13. Hornbach, D.J. 1999. X-Ray Diffraction and Ring-Core Determination of the Residual Stress Distributions in One(1) Alloy C22 Welded Plate and One (1) Alloy C22 Test Bar. 1034-8520. Lambda Research, Cincinnati, Ohio.
14. Jones, R.H. and Ricker, R.E. 1987. "Stress-Corrosion Cracking. " Metals Handbook Ninth Edition. Volume 13. Corrosion. 145-163.
15. Sprowls, D.O. 1987. "Evaluation of Stress-Corrosion Cracking." Metals Handbook Ninth Edition. Volume 13. Corrosion. 245-282.
16. Young, L.M; Catlin, G.M.; Andresen, P.L.; and Gordon, G.M. 2003. "Constant Load SCC Initiation Response of Alloy 22 (UNS N06022), Titanium Grade 7 and Stainless Steels at 105°C." Corrosion 2003. The annual conference and corrosion show sponsored by NACE International. Paper No. 03685.