Modeling intersonic crack propagation in fiber reinforced composites with contact/cohesive laws

American Society of Mechanical Engineers, Aerospace Division (Publication) AD

Volumn 66, Issue , 2001, Pages 121-153

  Dwivedi, S K ^a,b   Espinosa, H D ^a  

^a Northwestern University   (United States)

^b WASHINGTON STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSIVE STRENGTH; COMPUTER SIMULATION; FAILURE (MECHANICAL); FIBER REINFORCED MATERIALS; FRICTION; SHEAR WAVES;

SHEAR TRACTIONS;

CRACK PROPAGATION;

EID: 0242661449     PISSN: 07334230     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (56)

1. Tippur, H.V. and Rosakis, A.J.,"Quasi-static and dynamic crack growth along bimaterial interfaces: A note on crack-tip field measurements using Coherent Gradient Sensing."; Proceeding of the Society for Experimental Mechanics, Inc.; Vol. 48; 1991; pp. 243-251.
2. Tippur, H.V., Krishnaswamy, S., and Rosakis, A.J.,"A coherent gradient sensor for crack tip deformation measurements: analysis and experimental results."; International Journal of Fracture; Vol. 48; 1991; pp. 193-204.
3. Rosakis, A.J., Lee, Y.J., and Lambros, J.,"Dynamic crack growth in bimaterial interface."; in Experiments in Micromechanics of Failure Resistant Materials; ASME; AMD- Vol. 130; 1991; pp. 17-23.
4. Lambros, J. and Rosakis, A.J.,"Shear dominated transonic interfacial crack growth in a bimaterial - I. Experimental observations."; Journal of the Mechanics and Physics of Solids; Vol. 43; No. 2; 1995; pp. 169-188.
5. Lambros, J. and Rosakis, A.J.,"Development of a dynamic decohesion criterion for subsonic fracture of the interface between two dissimilar materials."; Proceedings of the Royal Society of London, A; Vol. 451; 1995; pp. 711-736.
6. Lambros, J. and Rosakis, A.J.,"Dynamic decohesion of bimaterials: Experimental observations and failure criteria."; International Journal of Solids and Structures; Vol. 32; No. 17/18; 1995; pp. 2677-2702.
7. Singh, R.P. and Shukla, A.,"Subsonic and intersonic crack growth along a bimaterial interface."; Journal of Applied Mechanics, Trans. ASME; Vol. 63; December 1996; pp. 919-924.
8. Singh, R.P., Lambros, J., Shukla, A., and Rosakis, A.J., "Investigation of the mechanics of intersonic crack propagation along a bimaterial interface using coherent gradient sensing and photoelasticity. "; Processings of the Royal Society of London A; Vol. 453; 1997; pp. 2649-2667.
9. Broberg, K.B.,"The propagation of a brittle crack."; Archiv fur Fysik; Vol. 18; 1960; pp. 159-192.
10. Rice, J.R., Suo, Z., and Wang, J-S.,"Mechanics and thermodynamics of brittle interfacial failure in bimaterial systems."; Metal- Ceramic Interfaces, Acta-Scripta Metallurgica Proceedings Series; Vol. 4; 1990; pp. 269-294.
11. Wu, K-C.,"Explicit crack-tip fields of an extending interface crack in an anisotropic bimaterial."; International Journal of Solids and Structures; Vol. 27; No. 4; 1991; pp. 455-466
12. Liu C., Lambros, J., and Rosakis, A.J.,"Highly transient elastodynamic crack growth in a bimaterial interface: Higher order asymptotic analysis and optical experiments."; Journal of the Mechanics and Physics of Solids; Vol. 41; No. 12; 1993; pp. 1887-1954.
13. Liu C., Huang, Y., and Rosakis, A.J.,"Shear dominated transonic interfacial crack growth in a bimaterial - II. Asymptotic fields and favorable velocity regimes."; Journal of the Mechanics and Physics of Solids; Vol. 43; No. 2; 1995; pp. 189-206.
14. Ricci, V., Shukla, A., and Singh, R.P.,"Evaluation of fracture mechanics parameters in bimaterial systems using strain gages."; Engineering Fracture Mechanics; Vol. 58; No. 4; 1997; pp. 273-283.
15. Sing, R.P., Kavaturu, M., and Shukla, A.,"Initiation, propagation and arrest of an interface crack subjected to controlled stress wave loading."; International Journal of Fracture; Vol. 83; 1997; pp. 291-304.
16. Kavaturu, M., and Shukla, A.,"Dynamic fracture criteria for crack growth along bimaterial interfaces."; Journal of Applied Mechanics, Trans. ASME.; Vol. 65; June 1998; pp. 293-299.
17. Zheng, S. and Sun, C.T.,"A double-plate finite-element model for the impact-induced delamination problem."; Composites Science and Technology; Vol. 53; 1995; pp. 111-118.
18. Lambros, J. and Rosakis, A.J.,"Dynamic crack initiation and growth in thick unidirectional graphite/epoxy plates."; Composites Science and Technology; Vol. 57; 1997; pp. 55-65.
19. Stout, M.G., Liu, C., Ellis, R.W., Haberman, K.S., Bennet, J.G., Williams, Addesio, F.L. and Rosakis, A.J.,"Mechanics analysis and simulation of a graphite/epoxy composite plate."; in Experimental Mechanics, Allison (ed.); 1998; pp. 187-192.
20. Kumar, P. and Kishore, N.N.,"Initiation and propagation toughness of delamination crack under an impact load."; Journal of the Mechanics and Physics of Solids; Vol. 46; No. 10; 1998; pp. 1773-1787.
21. Shih, C.F. and Asaro, R.J.,"Elastic-plastic and asymptotic fields of interface cracks."; International Journal of Fracture; Vol. 42; 1990; pp. 101-116.
22. Varias, A.G., O'Dowd, N.P., McHugh, P.E., and Shih, C.F., "Computational modeling of interface failure."; Proceedings of the 1990 ASME International Computers in Engineering Conference; Vol. 2; edited by Kinzel, G.L. and Rhode, S.M.; Boston; pp. 671-689.
23. Varias, A.G., O'Dowd, N.P., Asaro, R.J., and Shih, C.F., "Failure of bimaterial interfaces."; Materials Science and Engineering; Vol. A126; 1990; pp. 65-93.
24. Yang, W., Suo, Z., and Shih, C.F.,"Mechanics of dynamic debonding."; Proceedings of the Royal Society of London A; Vol. 433; 1991; pp. 679-697.
25. Nakamura, T., Kushner, A., and Lo, C.Y.,"Interlaminar dynamic crack propagation."; International Journal of Solids and Structures; Vol. 32; No. 17/18; 1995; pp. 2657-2675.
26. Xu, X-P. and Needleman, A.," Numerical simulations of dynamic interfacial crack growth allowing for crack growth away from the bond line."; International Journal of Fracture; Vol. 74; 1995; pp. 253-275.
27. Xu, X-P. and Needleman, A.,"Numerical simulations of dynamic crack growth along an interface."; International Journal of Fracture; Vol. 74; 1996; pp. 289-324.
28. Siegmund, T., Fleck, N.A. and Needleman, A.," Dynamic crack growth across an interface."; International Journal of Fracture; Vol. 85; 1997; pp. 381-402.
29. Lo, C.Y., Nakamura, T. and Kushner, A.S.,"Dynamic failure analysis along interfaces in composite materials."; in Advanced Computational Methods for Material Modeling; ASME; AMD-Vol. 180/PVP-Vol. 268; 1993; pp. 115-124.
30. Sun, C.T. and Qian, W., "The use of finite extension strain energy release rates in fracture of interfacial cracks."; International Journal of Solids and Structures; Vol. 34; No. 20; 1997; pp. 2595-2609.
31. Pandey, R.K. and Sun, C.T.,"Calculating strain energy release rate in cracked orthotropic beams."; Journal of Thermoplastic Composite Materials; Vol. 9; October 1996; pp. 381-395.
32. Sun, C.T. and Wu, X.X.,"On the J-integral in periodically layered composites."; International Journal of Fracture; Vol. 78; 1996; pp. 89-100.
33. Sun, C. and Chen, J.L.,"A simple flow rule for characterizing the nonlinear behavior of fiber composites.", Journal of Composite Materials; Vol. 23; 1989; pp. 1009-1020.
34. Espinosa, H.D.; Lu, H-C; Dwivedi, S. and Zavattieri, P.D., "A Finite Deformation Anisotropic Plasticity Model for Fiber Reinforced Composites." in Proceedings of 12th Annual Technical Conference of the American Society for Composites; Dearborn; MI; 1997; pp. 429-441.
35. Chen, J.K.; Allahdadi, F.A. and Sun, C.T.,"A quadratic yield function for fiber-reinforced composites."; Journal of Composite Materials; Vol. 31; No. 8; 1997; pp. 788-811.
36. O'Donoghue, P.E.; Anderson (Jr.), C.E.; Friesenhahn, G.J. and Parr, C.H.,"A constitutive formulation for anisotropic materials suitable for wave propagation computer programs."; Vol. 26; No. 13; 1992; pp. 1860-1884.
37. Voyiadjis, G.Z. and Thiagarajan, G.,"An anisotropic yield surface model for directionally reinforced metal matrix composites."; International Journal of Plasticity; Vol. 11; 1995; pp. 867-894.
38. Voyiadjis, G.Z. and Thiagarajan, G.,"A cyclic anisotropic-plastic ity model for metal matrix composites."; International Journal of Plasticity; Vol. 12; No. 1; 1996; pp. 69-91.
39. Aboudi, J.,"Micromechanical analysis of composites by the method of cells."; Applied Mechanics Reviews; Vol. 42; 1989; pp. 193-221.
40. Paley, M. and Aboudi, J.,"Micromechanical analysis of composites by the generalized cells model."; Mechanics of Materials; Vol. 14; 1992; pp. 127-139.
41. Lee, S-W. R. and Sun, C.T.,"A Quasi-Static Penetration Model for Composite Laminates"; Journal of Composite Materials; Vol. 27; 1992; pp. 251-271.
42. Lee, S-W. R. and Sun, C.T.," Dynamic Penetration of Graphite/Epoxy Laminates Impacted by a Blunt-Ended Projectile,"; Composites Science and Technology; Vol. 49; 1993; pp. 369-380.
43. Xu, X-P,"Dynamic fracture via molecular dynamics and cohesive finite element methods"; Advances in Failure Mechanisms in Brittle Materials; MD-Vol. 75/AMD-Vol. 219; ASME; 1996; pp. 99-107.
44. Camacho, G.T. and Ortiz, M.,"Computational modeling of impact damage in brittle materials."; International Journal of Solids and Structures; Vol. 33; No. 20-22; 1996; pp. 2899-2938.
45. Espinosa, H.D.; Zavattieri, P.D. and Dwivedi, S.,"A finite deformation continuum/discrete model for the description of fragmentation and damage in brittle materials."; Special Issue of Journal of Mechanics and Physics of Solids; Vol. 46; No. 10; 1998; pp. 1909-1942.
46. Espinosa, H.D.; Dwivedi, S. and Lu, H-C.,"Modeling impact induced delamination of woven fiber reinforced composites with contact/cohesive laws."; Special Issue of Computer Methods in Applied Mechanics and Engineering; Vol. 183; No. 3-4; 1999; pp. 259-290.
47. Espinosa, H.D.; Lu, H-C and Dwivedi, S., "A 3-D finite deformation anisotropic visco-plasticity model for fiber composites."; Journal of Composite Materials; Vol. 35; No. 5; 2001; pp. 369-410.
48. Espinosa, H.D.; Zavattieri, P.D. and Emore, G.L., 1997," Adaptive FEM computation of geometric and material nonlinearities with application to brittle failure."; Special Issue of Mechanics of Materials; Vol. 29; 1998; pp. 275-305.
49. Weeks, C.A. and Sun, C.T.,"Nonlinear rate dependent response of thick- section composite laminates."; in High Strain Rate Effects on Polymer, Metal and Ceramic Matrix Composites and other Advanced Materials; ASME; AD-Vol. 48; 1996; pp. 81-95.
50. Weeks, C.A. and Sun, C.T.,"Modeling non-linear rate-dependent behavior in fiber reinforced composites."; Composites Science and Technology; Vol. 58; No. 3-4; 1998; pp. 603-611.
51. Atluri, S.N.,"Path-independent integrals in finite elasticity and inelasticity, with body forces, inertia, and arbitrary crack-face conditions."; Engineering Fracture Mechanics; Vol. 16; No. 3; 1982; pp. 341-364.
52. Nakamura, T., Shih, C.F. and Freund, L.B.," Computational methods based on an energy integral in dynamic fracture."; International Journal of Fracture; Vol. 27; 1985; pp. 229- 243.
53. Carpenter, W.C., Read, D.T. and Dodds Jr., H.H.," Comparison of several path independent integrals including plasticity effects."; International Journal of Fracture; Vol. 31; 1986; pp. 303-323.
54. Moran, B. and Shih, C.F.,"Crack tip and associated domain integrals from momentum and energy balance."; Engineering Fracture Mechanics; Vol. 27; No. 6; 1987; pp. 615-642.
55. Nishioka, T.,"The state of the art in computational dynamic fracture mechanics."; JSME International Journal - Series A; Vol. 37; No. 4; 1994; pp. 313-333.
56. Li, F.Z., Shih, C.F. and Needleman, A.," A comparison of methods for calculating energy release rates."; Engineering Fracture Mechanics; Vol. 21; No. 2; 1985; pp. 405-421.