Spur gear dynamic models including defects: A review

Shock and Vibration Digest

Volumn 35, Issue 6, 2003, Pages 465-478

  Parey, A ^a   Tandon, N ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

Author keywords

Defect models; Degrees of freedom; Gear nonlinearities; Spur gear

Indexed keywords

DAMPING; DEGREES OF FREEDOM (MECHANICS); MACHINE VIBRATIONS; MATHEMATICAL MODELS; STIFFNESS;

GEAR ERRORS; MESH DAMPING;

SPUR GEARS;

EID: 0242551645     PISSN: 05831024     EISSN: None     Source Type: Journal    
DOI: 10.1177/05831024030356002     Document Type: Article

References (65)

1. Attia, A.Y., 1959, "Measurement of Gear Tooth Dynamic Friction," Journal of Engineering for Industry, Transactions of The American Society of Mechanical Engineers, Vol. 81, 1-9.
2. Azar, R.C., and Crossley, F.R.E., 1977, "Digital Simulation of Impact Phenomenon in Spur Gear Systems," Journal of Engineering for Industry, Transactions of the American Society of Mechanical Engineers, Vol. 99, 792-798.
3. Bartelmus, W., 2001, "Mathematical Modeling and Computer Simulations as an Aid to Gearbox Diagnostics," Mechanical Systems and Signal Processing, Vol. 15, No. 5, 855-871.
4. Benton, M., and Seireg, A., 1978a, "Simulation of Resonances and Instability Conditions In Pinion-Gear Systems," Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, Vol. 100, 26-32.
5. Benton, M., and Seireg, A., 1978b, "Factors Influencing Instability and Resonances in Geared Systems," Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, Vol. 103, 372-378.
6. Buckingham, E., 1931, "Dynamic Loads on Gear Teeth," American Society of Mechanical Engineers Special Research Publication, New York.
7. Choy, F.K., Polyschchuk, V., Zakrajsek, J.J., Handschuh, R.F. and Townsend, D.P., 1996, "Analysis of the Effect of Surface Pitting and Wear on the Vibration of a Gear Transmission System," Tribology International, Vol. 29, No. 1, 77-83.
8. Comparin, R.J., and Singh, R., 1989a, "Analysis of an Automotive Neutral Gear Rattle, Journal of Sound and Vibration, Vol. 131, 177-196.
9. Comparin, R.J., and Singh, R., 1989b, "Nonlinear Frequency Response Characteristics of an Impact Pair," Journal of Sound and Vibration, Vol. 134, 259-290.
10. Cornell, R.W., and Westervelt, W.W., 1978, "Dynamic Tooth Loads and Stressing for High Contact Ratio Spur Gears," Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, Vol. 100, 69-76.
11. Dowson, D., and Higginson, A., 1977, Elastohydrodynamic Lubrication, Pergamon, Oxford.
12. El Badaoui, M., Antoni, J., Guillet, F., and Daniere, J., 2001, "Use of the Moving Cepstrum Integral to Detect and Localize Tooth Spalls in Gears," Vol. 15, No. 5, 873-885.
13. Flodin, A., and Andersson, S., 1997, "Simulation of Mild Wear in Spur Gear," Wear, Vol. 207, 16-23.
14. Harris, S.L., 1958, "Dynamic Loads on the Teeth of Spur Gears," Proceedings of the Institution of Mechanical Engineers, Vol. 172, 87-112.
15. Hortel, M., 1967, "Forced Damped Vibrations in a Nonlinear Parametric Systems of Gears With Several Degrees of Freedom," in Proceedings of the 4th Conference on Nonlinear Oscillations, 337-346.
16. Howard, I., Jia, S., and Wang, J., 2001, "The Dynamic Modeling of a Spur Gear in Mesh Including Friction and a Crack," Mechanical Systems and Signal Processing, Vol. 15, No. 5, 831-853.
17. Ichimaru, K., and Hirano, F., 1974, "Dynamic Behavior of Heavily Loaded Spur Gears," Journal of Engineering for Industry, Transactions of the American Society of Mechanical Engineers, Vol. 96, 373-381.
18. Kahraman, A., and Singh, R., 1990, "Nonlinear Dynamics of a Spur Gear Pair," Journal of Sound and Vibration, Vol. 142, 49-75.
19. Kahraman, A., and Singh, R., 1991a, "Nonlinear Dynamics of a Gear Rotor System with Multiple Clearances," Journal of Sound and Vibration, Vol. 144, 469-506.
20. Kahraman, A., and Singh, R., 1991b, "Interaction Between Time-Varying Mesh Stiffness and Clearance Nonlinearities in a Geared System," Journal of Sound and Vibration, Vol. 146, 135-156.
21. Kahraman, A., Ozguven, H.N., Houser, D.R., and Zakrahsek, J., 1989, "Dynamic Analysis of Gear Rotors by Finite Elements," in Proceedings of the 5th American Society of Mechanical Engineers International Conference on Gearing and Power Transmission 1, 375-382.
22. Kasuba, R., and Ivans, J.W., 1981, "An Extended Model for Determining Dynamic Loads in Spur Gearing," Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, Vol. 103, 398-409.
23. Kiyono, S., Aida, T., and Fugii, Y., 1978, "Vibration of Helical Gears. Part I: Theoretical Analysis. Part II: Experimental Investigation," Bulletin of the Japanese Society of Mechanical Engineers, Vol. 21, 915-930.
24. Kobo, A., 1978 "Stress Condition, Vibrational Exciting Force and Contact Pattern of Helical Gears with Manufacturing and Alignment Errors," Journal of Mechanical Design Transactions of the American Society of Mechanical Engineers, Vol. 100, 77-84.
25. Kohler, H., 1959, "The Mechanism and Measurement of Dynamic Loading in Spur Gears," Ph.D. Thesis, University of Sheffield.
26. Kuang, J.H., and Lin, A.D., 2001, "The Effect of Tooth Wear on the Vibration Spectrum of a Spur Gear Pair," Journal of Vibration and Acoustics, Vol. 23, 311-317.
27. Kuang, J.H., and Yang, Y.T., 1992, "An Estimate of Mesh Stiffness and Load Sharing Ratio of A Spur Gear Pair," in Proceedings of the ASME 12th International Power Transmission and Gearing Conference, Scottsdale, Arizona, DE-43, 1-10.
28. Kukucay, F., 1984a, "Dynamic Loads in Gear Teeth," in Proceedings of the 3rd Conference on Vibration Of Rotating Machinery, Institution of Mechanical Engineers, 73-79.
29. Kucukay, F., 1984b, "Dynamic Behavior of High Speed Gears," in Proceedings of the 3rd Institution of Mechanical Engineers International Conference on Vibration in Rotating Machinery, New York, 81-90.
30. Lin, H.H., Huston, R.L., and Coy, J.J., 1988a, "On Dynamic Loads in Parallel Shafts Transmissions, Part I - Modeling and Analysis," Journal of Mechanisms, Transmissions, and Automation in Design, Transactions of the American Society of Mechanical Engineers, Vol. 110, 221-225.
31. Lin, H.H., Huston, R.L., and Coy, J.J., 1988b, "On Dynamic Loads in Parallel Shafts Transmissions, Part II - Parameter Study," Journal of Mechanisms, Transmissions, and Automation in Design, Transactions of the American Society of Mechanical Engineers, Vol. 110, 221-225.
32. Mark, W.D., 1978a, "Analysis of the Vibration of Gear Systems: Basic Theory," Journal of the Acoustical Society of America, Vol. 63, 1409-1430.
33. Mark, W.D., 1978b, "Analysis of the Vibration of Gear Systems: Tooth Error Representation, Approximations and Applications," Journal of the Acoustical Society of America, Vol. 66, 1758-1787.
34. Muller, L., 1986, Gearboxes, Dynamics, WNT, Warsaw (in Polish).
35. Munro, R.G., 1962, "The Dynamic Behavior of Spur Gears," Ph.D. Dissertation, Cambridge University.
36. Nakada, T., and Utagawa, M., 1956, "The Dynamic Loads on Gears Caused by the Varying Elasticity of the Mating Teeth of Spur Gears," in Proceedings of the 6th Japanese National Congress on Applied Mechanics, 493-497.
37. Nakamura, K., 1967, "Tooth Separation and Abnormal Noise on Power Transmission Gears," Bulletin of the Japanese Society of Mechanical Engineers, Vol. 10, 846-854.
38. Neriya, S.V., Bhat, R.B., and Sankar, T.S., 1985, "Coupled Torsional Flexural Vibration of a Geared Shaft System Using Finite Element Analysis," Shock and Vibration Bulletin, Vol. 55, 13-25.
39. Ohnuma, S., Shigetaro, Y., Mineichi, I., and Fujimoto, T., 1985, "Research on the Idling Rattle of Manual Transmission," SAE Paper 850979.
40. Ozguven H.N., 1991, "A Nonlinear Mathematical Model for Dynamic Analysis of Spur Gears Including Shaft and Bearing Dynamics," Journal of Sound and Vibration, Vol. 145, No. 2, 239-260.
41. Ozguven, H.N., and Houser, D.R., 1988a, "Mathematical Models Used in Gear Dynamics - A Review," Journal of Sound and Vibration, Vol. 121, 383-411.
42. Ozguven, H.N., and Houser, D.R., 1988b, "Dynamic Analysis of High Speed Gears by Using Loaded Static Transmission Error," Journal of Sound and Vibration, Vol. 125, 71-83.
43. Pfeiffer, F., 1991, "Modeling Problems of Rattling in Gear Boxes," in Proceedings of the 3rd Japanese Society of Mechanical Engineers International Conference on Motion and Power Transmission, Hiroshima, Japan, 43-48.
44. Remmers, E.P., 1978, "Gear Mesh Excitation Spectra for Arbitrary Tooth Spacing Errors, Loads and Design Contact Ratio," Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, Vol. 100, 715-720.
45. Reswick, J.B., 1955, "Dynamic Loads on Spur and Helical Gear Teeth," Transactions of the American Society of Mechanical Engineers, Vol. 77, 635-644.
46. Rfbbechi, B., Oswald, F., and Townsend, D., 1996, "Measurement of Gear Tooth Dynamic Friction," ASME Proceedings of the 6th International Power Transmission and Gearing Conference, DE-88, 355-363.
47. Ross, A.A., 1927 "High Speed Gears," American Gear Manufacturers Association Paper.
48. Sakai, T., Doi, Y., Yamamoto, K., Ogasawara, T., and Narita, M., 1981, "Theoretical and Experimental Analysis of Rattling Noise of Automotive Gearbox," SAE Paper 810773.
49. Singh, R., Xie, H., and Comparin, R.J., 1989, "Analysis of an Automotive Neutral Gear Rattle," Journal of Sound and Vibration, Vol. 131, 177-196.
50. Strauch, H, 1953, "Zahnradschwin - gungen" (Gear Vibration), Zeitschrift des Vereines Deutscher Ingiere, Vol. 95, 159-163.
51. Sweeney, P.J., and Randall, R.B., 1996, "Gear Transmission Error Measurement Using Phase Demodulation," Proceedings of the Institution of Mechanical Engineers, Part C, Vol. 210, 201-214.
52. Tuplin, W.A., 1950, "Gear Tooth Stresses at High Speed," Proceedings of the Institution of Mechanical Engineers, Vol. 16, 162-167.
53. Tuplin, W.A., 1953, "Dynamic Loads on Gear Teeth," Machine Design, Vol. 25, 203-211.
54. Umezawa, K., Sata, T., and Ishikawa, J., 1984, "Simulation of Rotational Vibration of Spur Gears," Bulletin of the Japanese Society of Mechanical Engineers, Vol. 38, 102-109.
55. Utagawa, M., and Harada, T., "Dynamic Loads on Spur Gear Teeth at High Speed (Influence of the Pressure Angle Errors and Comparison Between the Reduction Gear and the Speed Up Gears)", Bulletin of the Japanese Society of Mechanical Engineers, Vol. 4, 706-713.
56. Utagawa, M., and Harada, T., 1962, "Dynamic Loads on Spur Gear Teeth Having Pitch Errors at High Speed," Bulletin of the Japanese Society of Mechanical Engineers, Vol. 5, 374-381.
57. Velex, P., and Berthe, D., 1989, "Dynamic Tool Load on Gear Trains," in Proceedings of the 5th American Society of Mechanical Engineers International Conference on Gearing and Power Transmission 1, 447-454.
58. Velex, P., and Maatar, M., 1996, "A Mathematical Model for Analyzing the Influence of Shape Deviations and Mounting Errors on Gear Dynamic Behavior," Journal of Sound and Vibration, Vol. 191, No. 5, 629-660.
59. Wang, C.C., 1978, "Rotational Vibration With Backlash: Part I," Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, Vol. 100, 363-373.
60. Wang, C.C., 1981, "Rotational Vibration With Backlash: Part II," Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, Vol. 103, 367-397.
61. Wang, K.L., and Cheng, H.S., 1981, "A Numeric Solution to the Dynamic Load, Film Thickness, and Surface Temperatures in Spur Gears, Part I - Analysis," Journal of Mechanical Design, Transactions of the American Society of Mechanical Engineers, Vol. 103, 177-187.
62. Winter, H., and Kojima, M., 1981, "A Study on the Dynamics of Geared System-Estimation of Overload on Gears in System," in Proceedings of the International Symposium on Gearing and Power Transmissions, Tokyo, C-12.
63. Wood, B., 1960, "Sources of Vibration Excitation in Spur Gears," Ph.D. Thesis, University of Leeds.
64. Yang, D.C.H., and Sun, Z.S., 1985, "A Rotary Model for Spur Gear Dynamics," ASME Journal of Mechanisms, Transmissions and Automation in Design, Vol. 107, 529-535.
65. Zeman, J., 1957, "Dynamische Zusatzkrafter," Zahnbradgetrieben, Zeitschrift des Vereines Deutscher Ingiere, Vol. 9, 244.