Diagnosis of Stator, Rotor and Airgap Eccentricity Faults in Three-Phase Induction Motors Based on the Multiple Reference Frames Theory

Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)

Volumn 2, Issue , 2003, Pages 1340-1346

  Cruz, S M A ^a   Cardoso, A J M ^a   Toliyat, H A ^b  

^a UNIVERSITY OF COIMBRA   (Portugal)

^b TEXAS A AND M UNIVERSITY   (United States)

Author keywords

Fault diagnosis; Induction motors; Multiple reference frames

Indexed keywords

COMPUTER SIMULATION; ROTORS; SHORT CIRCUIT CURRENTS; STATORS; TORQUE CONTROL;

FAULT DIAGNOSIS;

INDUCTION MOTORS;

EID: 0242424477     PISSN: 01972618     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (29)

1. S. B. Lee, R. M. Tallam and T. G. Habetler, "A robust, on-line turn-fault detection technique for induction machines based on monitoring the sequence component impedance matrix," IEEE Trans. Power Elect., vol. 18, n°3, pp. 865-872, May 2003.
2. G. H. Müller and C. F. Landy, "A novel method to detect broken rotor bars in squirrel cage induction motors when interbar currents are present," IEEE Trans. Energy Conv., vol. 18, n°1, pp. 71-79, March 2003.
3. F. C. Trutt, J. Sottile and J. L. Kohler, "Online condition monitoring of induction motors," IEEE Trans. Industry Appl., vol. 38, n°6, pp. 1627-1632, November/December 2002.
4. M. Arkan and P. Unsworth, "Online stator fault diagnosis in induction motors," IEE Proc. Electr. Power Appl., vol. 148, n° 6, pp. 537-547, November 2001.
5. th IEEE Conference on Decision and Control, Orlando, Florida, USA, pp. 167-172, December 4-7, 2001.
6. S. M. A. Cruz and A. J. M. Cardoso, "Stator winding fault diagnosis in three-phase synchronous and asynchronous motors, by the extended Park's vector approach," IEEE Trans. Industry Appl., vol. 37, n°5, pp. 1227-1233, September/October 2001.
7. W. T. Thomson, "On-line MCSA to diagnose shorted turns in low voltage stator windings of 3-phase induction motors prior to failure," International Electric Machines and Drives Conference (IEMDC 2001), Cambridge, MA, USA, pp. 891-898, June-17-20, 2001.
8. A. Stavrou, H. G. Sedding and J. Penman, "Current monitoring for detecting inter-turn short circuits in induction motors," IEEE Trans. Energy Conv., vol. 16, n° 1, pp. 32-37, March 2001.
9. G. M. Joksimovic and J. Penman, "The detection of inter-turn short circuits in the stator windings of operating motors," IEEE Trans. Industrial Elect., vol. 47, n°5, pp. 1078-1084, October 2000.
10. F. Filippetti, G. Franceschini, C. Tassoni and P. Vas, "Recent developments of induction motor drives fault diagnosis using AI techniques," IEEE Trans. Industrial Elect., vol. 47, n°5, pp. 994-1004, Ocotober 2000.
11. C. Kral, F. Pirker and G. Pascoli, "Detection of rotor faults in squirrel cage induction machines at standstill for batch tests by means of the vienna monitoring method," IEEE Industry Applications Society Annual Meeting, Rome, Italy, October 8-12, 2000.
12. J. F. Bangura and N. A. Demerdash, "Comparison between characterization and diagnosis of broken bars/end-ring connectors and airgap eccentricities of induction motors in ASD's using a coupled finite element-state space method," IEEE Trans. Energy Conv., vol. 15, n°1, pp. 48-56, March 2000.
13. T. M. Wolbank, "On-line stator winding faults detection in inverter fed induction motors by stator current reconstruction," Ninth International Conference on Electrical Machines and Drives (EMD'99), UK, pp. 253-257, September 1-3, 1999.
14. D. G. Dorrell and W. T. Thomson, "Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," IEEE Trans. Industry Appl., vol. 33, n°1, pp. 24-34, January/February 1997.
15. G. B. Kliman, W. J. Premerlani, R. A. Koegl and D. Hoeweler, "A new approach to on-line turn fault detection in ac motors," IEEE Industry Applications Society Annual Meeting, San Diego, California, vol. 1, pp. 687-693, October 6-10, 1996.
16. J. S. Hsu, "Monitoring of defects in induction motors through air-gap torque observation," IEEE Trans. Industry Appl., vol. 31, n°5, pp. 1016-1021, September/October 1995.
17. H. A. Toliyat and T. Lipo, "Transient analysis of cage induction machines under stator, rotor bar and end ring faults," IEEE Trans. Energy Conv., vol. 10, n°2, pp. 241-247, June 1995
18. J. S. Kohler, J. Sottile and F. C. Trutt, "Alternatives for assessing the electrical integrity of induction motors," IEEE Trans. Ind. Appl., vol. 28, n°5, pp. 1109-1117, September/Ocotber 1992.
19. A. Bellini, F. Filippetti, G. Franceschini and C. Tassoni., "Closed loop impact on the diagnosis of induction motors faults," IEEE Industry Applications Society Annual Meeting, Phoenix, USA, vol. 3, pp. 1913-1921, October 3-7, 1999.
20. R. M. Tallam, T. G. Habetler and R. G. Harley, "Stator winding turn-fault detection for closed-loop induction motor drives," IEEE Industry Applications Society Annual Meeting, Pittsburgh, Pennsylvania, USA, vol. 3, pp. 1553-1557, October 13-18, 2002.
21. F. Briz, M. W. Degner, A. Zamarrón and J. M. Guerrero, "On-line stator winding fault diagnosis in inverter-fed ac machines using high frequency signal injection," IEEE Industry Applications Society Annual Meeting, Pittsburgh, Pennsylvania, USA, vol. 3, pp. 2094-2101, October 13-18, 2002.
22. S. M. A. Cruz and A. J. M. Cardoso, "The method of multiple reference frames applied to the diagnosis of stator faults in three-phase induction motors," 4th International Power Electronics and Motion Control Conference (IPEMC 2003), Xi'an, China, August 14-17, 2003.
23. S. M. A. Cruz and A. J. M. Cardoso, "Diagnosis of stator inter-turn short-circuits in DTC induction motor drives," IEEE Industry Applications Society Annual Meeting, Salt Lake City, Utah, USA October 12-16, 2003.
24. S. M. A. Cruz, H. A. Toliyat and A. J. M. Cardoso, "DSP implementation of the multiple reference frames theory for the diagnosis of stator faults in a DTC induction motor drive," IEEE Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED 2003), Atlanta, GA, USA, August 24-26, 2003.
25. P. C. Krause, "Method of multiple reference frames applied to the analysis of symmetrical induction machinery," IEEE Transactions on Power Apparatus and Systems, vol. PAS-87, n°1, pp. 218-227, January 1968.
26. S. D. Sudhoff, "Multiple reference frame analysis of an unsymmetrical induction machine," IEEE Transactions Energy Conv., vol. 8, n°3, pp. 425-432, September 1993.
27. P. L. Chapman and S. D. Sudhoff, "A multiple reference frame synchronous estimator/regulator," IEEE Trans. Energy Conv., vol. 15, n°2, pp. 197-202, June 2000.
28. S. M. A. Cruz and A. J. M. Cardoso, "Modelling and simulation of DTC induction motor drives for stator winding faults diagnosis," 10th European Conference on Power Electronics and Applications, Toulouse, France, September 2-4, 2003.
29. S. Nandi and H. A. Toliyat, "Performance analysis of a three-phase induction motor under mixed eccentricity condition," IEEE Trans. Energy Conv., vol. 17, n°3, pp. 392-399, September 2002.