Deformation and damage in Al/Al2O3

Computational Materials Science

Volumn 28, Issue 3-4 SPEC. ISS., 2003, Pages 574-586

  Soppa, E ^a   Schmauder, S ^a   Fischer, G ^b   Brollo, J ^a   Weber, U ^a  

^a UNIVERSITY OF STUTTGART   (Germany)

^b Institute for Research and Transfer   (Germany)

Author keywords

Computer simulation; Damage initiation; FE method; Metal matrix composites (MMCs); Microgrid technique; Microstructure; Residual stresses

Indexed keywords

ALUMINA; CRACKS; DEFORMATION; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; MICROSTRUCTURE; RESIDUAL STRESSES; THERMAL STRESS;

HYDROSTATIC STRESSES;

METALLIC MATRIX COMPOSITES;

EID: 0142248167     PISSN: 09270256     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.commatsci.2003.08.034     Document Type: Conference Paper

References (64)

1. Bao G. A micromechanics model for damage in metal matrix composites. Damage Mechanics and Localization. AMD-Vol.142/MD-Vol. 34:1992;ASME.
2. Bao G. Damage due to fracture of brittle reinforcements in a ductile matrix. Acta Metall. Mater. 40(10):1992;2547-2555.
3. Llorca J., González C. Microstructural factors controlling the strength and ductility of particle reinforced metal matrix composites. J. Mech. Phys. Solids. 46(1):1998;1-28.
4. Brockenbrough J.R., Zok F.W. On the role of particle cracking in flow and fracture of metal matrix composites. Acta Metall. Mater. 43(1):1995;11-20.
5. 3 particle-dispersed SiC Composites. J. Eur. Cer. Soc. 19:1998;329-334.
6. Yang J., Candy C., Hu M.S., Zok F., Mehrabian R., Evans A.G. Effects of damage on the flow strength and ductility of a ductile Al alloy reinforced with SiC particulates. Acta Metall. Mater. 38:1990;2613-2619.
7. M. Seidenfuß, Untersuchungen zur Beschreibung des Versagensverhaltens mit Hilfe von Schädigungsmodellen am Beispiel des Werkstoffes 20 MnMoNi 5 5, Dissertation, Staatliche Materialprüfungsanstalt (MPA) Universität Stuttgart, 1992.
8. Lippmann N., Lehman A., Steinkopff Th., Spies H.-J. Modelling of the fracture behaviour of high speed steels under static loading. Comput. Mater. Sci. 7:1996;123-130.
9. Plankensteiner A.F., Böhm H.J., Rammerstorfer F.G., Buryachenko V.A. Hierarchical modelling of the mechanical behaviour of high speed steels as layer-structured particulate MMCs. J. de Phys. III. 1996;395-402.
10. Böhm H.J., Han W. Comparisons between three-dimensional and two-dimensional multi-particle unit cell models for particle reinforced MMCs. Model. Simul. Mater. Sci. Eng. 9(2):2001;47-65.
11. Geni M., Kikuchi M. Damage analysis of aluminium matrix composite considering nonuniform distribution of SiC particles. Acta Metall. Mater. 46:1998;3125-3133.
12. A.B. Ljungberg, C. Chatfield, M. Hehenberger, B. Sundström, Estimation of the plastic zone associated with cracks in cemented carbides, in: Proc. 2nd Int. Conf. Sci. of Hard Mater. (Rhodes/Greece) Inst. Phys. Conf. Ser., vol. 75, 1986, p. 619.
13. V. Tvergaard, Report des Department of Solid Mechanics, The Technical University of Denmark, Lyngby, Denmark, 1990.
14. Lipetzky P., Schmauder S. Crack-particle interaction in two-phase composites, Part I: particle shape effects. Int. J. Fract. 65:1994;345-358.
15. P. Lipetzky, S. Schmauder, Particle geometry effects on a stationary crack, in: T. Chandra, A.K. Dhingra (Eds.), TMS-AIME, Advanced Composites '93, Int. Conf. Adv. Comp. Mats., The Minerals, Metals and Materials Society, 1993, pp. 289-294.
16. Lipetzky P., Schmauder S., Fischmeister H. Geometrical factors related to composite microcracking. Comput. Mater. Sci. 1:1993;325-332.
17. Müller W.H., Schmauder S. Stress-intensity factors of r-cracks in fiber-reinforced composites under thermal and mechanical loading. Int. J. Fract. 59:1993;307-343.
18. Dong M., Schmauder S. Modelling of metal matrix composites by a self-consistent embedded cell model. Acta Metall. Mater. 44:1996;2465-2478.
19. U. Weber, Arbeitsbericht zum Projekt, Mikrostrukturelle Modellierung zum Einfluß der Eigenspannungsentwicklung auf die Schädigung bei der Kaltmassivumformung mehrphasiger Werkstoffe im DFG SSP, Erweiterung der Formgebungsgrenzen bei Umformprozessen, MPA Universität Stuttgart, 1999.
20. E. Soppa, S. Schmauder, G. Fischer, Numerical and experimental investigations of the influence of particle alignment on shear band formation in Al/SiC, in: 19th Risoe Int. Symp. on Material Science, Risø National Laboratory, Roskilde, DK, 7-11 September 1998, pp. 499-504.
21. Mishnaevsky L.L. Jr., Lippmann N., Schmauder S., Gumbsch P. In-situ observation of damage evolution and fracture in AlSi7Mg0.3 cast alloys. Eng. Fract. Mech. 63:1999;395-411.
22. Dietzhausen H., Dong M., Schmauder S. Numerical simulation of acoustic emission in fiber reinforced polymers. Comput. Mater. Sci. 13:1998;23-30.
23. S. Hönle, M. Dong, L. Mishnaevsky Jr, S. Schmauder, FE-simulation of damage evolution and crack growth in two phase materials, in: A. Bertram et al. (Eds.), Proc. 2nd Europ. Mechanics of Materials Conf. (Euromech-Mecamat), Magdeburg, 1998, pp. 189-196.
24. S. Hönle, Micromechanical Modelling of Deformation and Fracture of Graded WC/Co Hard Metals, Dissertation, Universität Stuttgart, 1998.
25. Hönle S., Schmauder S. Micromechanical simulation of crack growth in WC/Co using embedded unit cells. Comput. Mater. Sci. 13:1998;56-60.
26. Wulf J. Neue Finite-Elemente-Methoden zur Simulation des Duktilbruchs in Al/SiC. Reihe 18, Nr. 173:1995;VDI Verlag, Düsseldorf.
27. Mintchev O., Rohde J., Schmauder S. Mesomechanical simulation of crack propagation through graded ductile zones in hardmetals. Comput. Mater. Sci. 13:1998;81-89.
28. Soppa E., Schmauder S. Numerical investigations of the influence of particle alignment on shear band formation in Al/SiC. Streckhardt A. Proc. XXV. Int. FEM-Congress, Baden-Baden, 16-17 November 1998. 1998;149-160 Kongreß-organisation, Ennigerloh.
29. 3, in: 19th Risø Int. Symp. on Material Science, Risoe National Laboratory, Roskilde, DK, 7-11 September 1998, pp. 261-266.
30. Soppa E. Experimentelle Untersuchung des Verformungsverhaltens zweiphasiger Werkstoffe. Reihe 5, Nr. 408:1995;VDI Verlag, Düsseldorf.
31. P. Leßle, M. Dong, E. Soppa, S. Schmauder, Simulation of interpenetrating microstructures by self consistent matricity models, in: T. Winkler, A. Schubert (Eds.), Materials Mechanics, Fracture Mechanics, Micro Mechanics. An Anniversary Volume in Honour of B. Michels 50th Birthday, Fraunhofer IZM Berlin, Chemnitzer Werkstoffmechanik GmbH, Chemitz, 1999, pp. 456-461.
32. J. Rohde, Mesoskopische Modellierung des Versagensverhaltens beschichteter gradierter Hartmetalle, Dissertation an der Universität Stuttgart, 1998.
33. Rohde J., Schmauder S., Bao G. Mesoscopic modelling of gradient zones in hardmetals. Comput. Mater. Sci. 7:1996;63-67.
34. P. Doumalin, Microextensométrie Locale par Corrélation d'Image Numériques, PhD Thesis, École Polytechnique, Paris, 2000.
35. Gokhale A.M., Yang S. Application of image processing for simulation of mechanical response of multi-length scale microstructure of engineering alloys. Metall. Mater. Trans. 30A:1999;2369-2381.
36. Gokhale A.M. Estiamtion of bivariate size and orientation distribution of microcracks. Acta Mater. 44(2):1996;475-485.
37. Yang S., Tewari A., Gokhale A.M. Modelling of non-uniform spatial arrangement of fibers in a ceramic matrix composite. Acta Mater. 45(7):1997;3059-3069.
38. Agrawal H., Gokhale A.M., Graham S., Horstemeyer M.F., Bamman D.J. Rotations of brittle particles during plastic deformation of ductile alloys. Mater. Sci. Eng. A. 328:2002;310-316.
39. Dighe M.D., Gokhale A.M., Horstemeyer M.F. Effect of loading condition and stress state on damage evolution of silicon particles in an Al-Si-Mg base cast alloy. Metall. Mater. Trans. A. 33A:2002;555-565.
40. Horstemeyer M.F., Gokhale A.M. A void-crack nucleation model for ductile metals. Int. J. Solids Struct. 36:1999;5029-5055.
41. 3 composites by a micro-macro approach. Compos. Sci. Technol. 61:2001;2317-2326.
42. Hu G.K., Guo G., Baptiste D. A micromechanical model of influence of particle fracture and particle cluster on mechanical properties of metal matrix composites. Comput. Mater. Sci. 9:1998;420-430.
43. Fitoussi J., Guo G., Baptiste D. A statistical micromechanical model of anisotropic damage for S.M.C. composites. Compos. Sci. Technol. 58:1998;759-763.
44. Derrien K., Fitoussi J., Guo G., Baptiste D. Prediction of the effective damage properties and failure properties of non linear anisotropic discontinuous reinforced composites. Mota Soares C.A.et al. Mechanics of Composite Materials and Structures. 1999;131-150.
45. Derrien K., Baptiste D., Guedra-Degeorges D., Foulquier J. Multiscale modeling of the damaged plastic behaviour and failure of Al/SiCp composites. Int. J. Plast. 15:1999;667-685.
46. Fitoussi J., Guo G., Baptiste D. Determination of a tridimensional failure criterion at the fibre/matrix interface of an organic-matrix/discontinuous-reinforcement composite. Comops. Sci. Technol. 56:1996;755-760.
47. Information of ARC Leichtmetall Kompetenzzentrum Ranshofen GmbH.
48. Y.L. Liu, G. Fischer, Local strain fields in particulate metal matrix composites characterized by the object grating technique, in: M.L. Scott (Ed.), Proc. ICCM-11, vol. 3, Australian Composite Structures Society, pp. 1-9.
49. Crostack H.-A., Fischer G., Soppa E., Schmauder S., Liu Y.-L. Localization of strain in metal matrix composites studied by a scanning electron microscope-based grating method. J. Microsc. 201:2001;171-178.
50. LARSTRAN User's Manual, Part V Element Library, LASSO Ingenieurgesellschaft R. Dietz, U. Hindenlang, A. Kurz, Markomannenstraße 11, D-70771 Leinfelden-Echterdingen, November 1993.
51. Hibbit, Karlson and Sorensen Inc., ABAQUS 6.2-1, Pawtucket, RI, USA, ABACOM Software GmbH, Aachen.
52. Steinkopff Th., Sautter M. Simulation of the elasto-plastic behaviour of multiphase materials by advanced finite element techniques. Comput. Mater. Sci. 4:1995;10-22.
53. P. Doumalin, M. Bornert, E. Soppa, Computational and experimental investigations of the local strain field in elastoplastic two-phase materials, in: D. Miannay, P. Costa, D. Francois, A. Pineau (Eds.), Advances in Mechanical Behaviour, Plasticity and Damage, EUROMAT 2000, vol. 1, pp. 323-328.
54. Rice J., Tracey D.M. On the ductile enlargement of voids in triaxial stress fields. J. Mech. Solids. 17:1969;201-217.
55. Private information from Dr. Seidenfuss and Dr. Zhu, MPA Universität Stuttgart, Germany.
56. Ho S., Saigal A. Thermal residual stresses and mechanical behaviour of cast SiC/Al composites. Mater. Sci. Eng. A. 183:1994;39-47.
57. 3, Diplomarbeit, Hahn-Meitner-Institut, Berlin, 2001, 60 p.
58. Li H., Li J.B., Sun L.Z., Li S.X., Wang Z.G. Effect of low temperature treatment regime on residual stress state near interface in bonded SiC/6061 Al compounds. Mater. Sci. Eng. A. 221:1996;179-186.
59. Private information from Y.-L. Liu, Risø National Laboratory; PO Box 49, DK-4000 Roskilde, Denmark.
60. Jain M., MacEwen S.R., Wu L. Finite element modelling of residual stresses and strength differential effect in discontinuously reinforced metal matrix composites. Mater. Sci. Eng. A. 183:1994;111-120.
61. Buffière J.-Y., Maire E., Cloetens P., Lormand G., Fougères R. Characterization of internal damage in a MMCp using X-ray synchrotron phase contrast microtomography. Acta Mater. 47(5):1999;1613-1625.
62. Leichtmetallkompetenzzentrum Ranshofen GMBH "Werkstoffblätter"
63. Munz D., Fett T. Mechanisches Verhalten keramischer Werkstoffe. 1989;Springer-Verlag.
64. 3 - Verbundwerkstoffen verursacht durch Schädigungsprozesse, in: H.P. Degischer (Ed.), 14. Symposium "Verbundwerkstoffe und Werkstoffverbunde", Wien, 2003, pp. 581-586.