Effect of laser pre-treatment on the machining performance of aluminum/SiC MMC

Journal of Engineering Materials and Technology

Volumn 125, Issue 4, 2003, Pages 378-384

  Barnes, Stuart ^a   Morgan, Richard ^a   Skeen, Andrew ^a  

^a UNIVERSITY OF WARWICK   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM ALLOYS; HEAT AFFECTED ZONE; LASER APPLICATIONS; MACHINING; METALLIC MATRIX COMPOSITES; METALLOGRAPHIC MICROSTRUCTURE; MICROHARDNESS; QUENCHING; SEMICONDUCTOR LASERS; SILICON CARBIDE; TRANSMISSION ELECTRON MICROSCOPY; WEAR OF MATERIALS;

LASER HEATING; SELF-QUENCHING;

LASER BEAM EFFECTS;

EID: 0142087717     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1605112     Document Type: Article

References (36)

1. Newaz, G. M., and Neber-Aeschbache, H., 1995, eds., Metal Matrix Composites-Pt. 1: Application and Processing, Trans Tech,-Key Engineering Materials, 104-7, Aedermannsdorf (ISBN 0878496971).
2. www.lotus-elise.nl, Lotus website
3. Hooker, J. A., and Doorbar, P. J., 2000, "Metal Matrix Composites for Aeroengines," Mat. Sci. Technol., 16(7-8), pp. 725-731.
4. Manna, A., and Bhattacharyya, B., 2002, "A Study on Different Tooling Systems During Machining of Al/SiC-MMC," J. Mater. Process. Technol., 123(3), pp. 476-482.
5. Andrewes, C. J. E., Feng, H.-Y., and Lau, W. M., 2000 "Machining of an Aluminum/SiC Composite using Diamond Inserts," J. Mater. Process. Technol., 102(1-3), pp. 25-29.
6. El-Gallab, M., and Sklad, M., 1998, "Machining of Al/SiC Particulate Metal Matrix Composites: Part I: Tool Performance," J. Mater. Process. Technol., 83(1-3), pp. 151-158.
7. El-Gallab, M., and Sklad, M., 1998, "Machining of Al/SiC Particulate Metal Matrix Composites: Part II: Workpiece Surface Integrity," J. Mater. Process. Technol., 83(1-3), pp. 277-285.
8. El-Gallab, M., and Sklad, M., 2000, "Machining of Al/SiC Particulate Metal Matrix Composites: Part III: Comprehensive Tool Wear Models," J. Mater. Process. Technol., 101(1-3), pp. 10-20.
9. Xiaoping, L., and Seah, W. K. H., 2001, "Tool Wear Acceleration in Relation to Workpiece Reinforcement Percentage in Cutting of Metal Matrix Composites," Wear, 247(2), pp. 161-171.
10. Joshi, S. S., Ramakrishnan, N., Nagarwalla, H. E., and Ramakrishnan, P., 1999, "Wear of Rotary Carbide Tools in Machining of Al/SiCp Composites," Wear, 230(2), pp. 124-132.
11. Hooper, R. M., Henshall, J. L., and Klopfer, A., 1999, "The Wear of Polycrystalline Diamond Tools Used in the Cutting of Metal Matrix Composites," Int. J. Refract. Met. Hard Mater., 17(1-3), pp. 103-109.
12. Iuliano, L., Settineri, L., and Gatto, A., 1998, "High-Speed Turning Experiments on Metal Matrix Composites," Composites, Part A, 29(12), pp. 1501-1509.
13. Barnes, S., and Pashby, I. R., 1999, "Effect of Heat Treatment on the Drilling Performance of Aluminum/SiC MMC," Appl. Compos. Mater., 6(2), pp. 121-138.
14. Barnes, S., and Pashby, I. R., 2000, "Through-Tool Coolant Drilling of Aluminum/SiC Metal Matrix Composite," ASME J. Eng. Mater. Technol., 122(4), pp. 384-388.
15. Barnes, S., and Pashby, I. R., 1995, "Machining of Aluminum Based Metal Matrix Composites," Appl. Compos. Mater., 2(1), pp. 31-42.
16. Chambers, A. R., and Stephens, S. E., 1991, "Machining of Al-5 Mg Reinforced With 5 vol.% Saffil and 15 vol.% SiC," Mater. Sci. Eng., A, 135, pp. 287-290.
17. Gindy, N. N. Z., and Clegg, A. J., 1989, "Machining of Metal Matrix Composites," BNF 7th Int. Conf., The Materials Revolution Through the 90's, Oxford, pp. 1-16, Paper 32.
18. Chen, P., 1992, "High-Performance Machining of SiC Whisker-Reinforced Aluminum Composite by Self-Propelled Rotary Tools," CIRP Ann., 41(1), pp. 59-62.
19. Chen, P., and Miyake, Y., 1989, "Machining Characteristics of SiC Whisker Reinforced Aluminum," in Proceedings of 1989 ASM Int. Conf. on Machinability, Cincinnati, pp. 69-75.
20. McGinty, M. J., and Preuss, C. W., 1985, "Machining Ceramic Fibre Metal Matrix Composites," Int. Conf. on High Productivity Machining, Materials and Processes, New Orleans, LA, pp. 231-243.
21. Lin, J. T., Bhattacharyya, D., and Lane, C., 1995, "Machinability of a Silicon Carbide Reinforced Aluminum Metal Matrix Composite," Wear, 181-183 pp. 883-888.
22. Tomac, N., and Tonnessen, K., 1992, "Machinability of Particulate Aluminum Matrix Composites," CIRP Ann., 41(1), pp. 55-59.
23. Lane, C., 1992, "Machinability of Aluminum Composites as a Function of Matrix Alloy and Heat Treatment," Proc. of Machining of Composite Materials Symp., Chicago, IL, pp. 3-15.
24. www.aeat.co.uk AEA Technology website.
25. Selvan, J. S., Subramanian, K., and Nath, A. K., 1999, "Effect of Laser Surface Hardening on En18 (AISI 5135) Steel," J. Mater. Process. Technol., 91, pp. 29-36.
26. Ehlers, B., Herfurth, H. J., and Heinemann, S., 2000, "Hardening and Welding With High Power Diode Lasers," Laser Diodes and LEDs in Industrial, Measurement, Imaging and Sensors Applications II; Testing, Packaging and Reliability of Semiconductor Lasers, Proceedings of SPIE, 3945, pp. 63-70.
27. 2 Laser Beam," Surf. Coat. Technol., 115, pp. 249-255.
28. Katsamas, A. I., and Haidemenopoulos, G. N., 2001, "Laser-Beam Carburisation of Low-Alloy Steels," Surf. Coat. Technol., 139, pp. 183-191.
29. www.rofin.com, Rofin website.
30. www.purdue.edu/amap/processtech.html, Purdue University website.
31. Chryssolouris, G., Anifantis, N., and Karagiannis, S., 1997, "Laser Assisted Machining: An Overview," ASME J. Manuf. Sci. Eng., 119, pp. 766-769.
32. Barnes, S., Timms, N., Bryden, B., and Pashby, I. R., 2000, "High Power Diode Laser Cladding," International Manufacturing Conference in China, Hong Kong, 16-17 Aug., pp. 191-192.
33. Wang, H. M., Chen, Y. L., and Yu, L. G., 2000, "'In-Situ' Weld-Alloying/Laser Beam Welding of SiCp/6061Al MMC," Mater. Sci. Eng., A, 293(1-2), pp. 1-6.
34. Hong, L., Vilar, R. M., and Youming, W., 1997, "Laser Beam Processing of a SiC Particulate Reinforced 6061 Aluminum Metal Matrix Composite," J. Mater. Sci., 32, pp. 5545-5550.
35. Smallman, R. E., 1970, Modern Physical Metallurgy, Butterworth-Heinemann, ISBN: 040870022X.
36. Smallman, R. E., and Bishop, R. J., 1999, Modern Physical Metallurgy: Metals and Materials, Butterworth-Heinemann, ISBN: 0750645644.