Effect of simulated resin-bonded fixed partial denture clinical conditions on resin cement mechanical properties

Journal of Oral Rehabilitation

Volumn 30, Issue 8, 2003, Pages 837-846

  Walker, Mary P ^a,b   Spencer, P ^a   Eick, J D ^a  

^a UNIVERSITY OF MISSOURI KANSAS CITY   (United States)

^b UNIVERSITY OF MISSOURI KANSAS CITY SCHOOL OF DENTISTRY   (United States)

Author keywords

Flexural properties; Fracture analysis; Resin cement; Resin bonded fixed partial dentures

Indexed keywords

FILLER; RESIN; RESIN CEMENT;

ADHESION; AGING; ANALYSIS OF VARIANCE; AQUEOUS SOLUTION; ARTICLE; CEMENTATION; COMPRESSION; DEGRADATION; DENTURE; PHYSICAL CHEMISTRY; SCANNING ELECTRON MICROSCOPY; SIMULATION; SOLUBILITY; STRENGTH; SURFACE PROPERTY; TEMPERATURE;

ANALYSIS OF VARIANCE; COMPOSITE RESINS; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTURE, PARTIAL, FIXED, RESIN-BONDED; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; RESIN CEMENTS; SOLUBILITY; WATER;

EID: 0141959776     PISSN: 0305182X     EISSN: None     Source Type: Journal    
DOI: 10.1046/j.1365-2842.2003.01148.x     Document Type: Article

References (64)

1. ANUSAVICE, K.J. (1996) Phillips' Science of Dental Materials, 10th edn, p. 273. W.B. Saunders Co, Philadelphia, USA.
2. AQUILINO, S.A., DIAZ-ARNOLD, A.M. & PIOTROWSKI, T.J. (1991) Tensile fatigue limits of prosthodontic adhesives. Journal of Dental Research, 70, 208.
3. BATES, J.F., STAFFORD, G.D. & HARRISON, A. (1975) Masticatory function - a review of the literature (II) Speed of movement of the mandible, rate of chewing and forces developed in chewing. Journal of Oral Rehabilitation, 2, 349.
4. BLACK, J. (1999) Biological Performance of Materials, 3rd edn, p. 94. Marcel Dekker, Inc, New York, USA.
5. BRAEM, M.J., DAVIDSON, C.L., LAMBRECHTS, P. & VANHERLE, G. (1994) In vitro flexural fatigue limits of dental composites. Journal of Biomedical Materials Research, 28, 1397.
6. BRANDRUP, J., IMMERGUT, E.H. & GRULKE, E.A. (1999) Polymer Handbook, 4th edn, p. 280. John Wiley & Sons, Inc, New York, USA.
7. BRUMFIELD, R.C. (1954) Load capacities of posterior dental bridges. Journal of Prosthetic Dentistry, 4, 530.
8. COHEN, J. (1988) Statistical Power Analysis for the Behavioral Sciences, 2nd edn, p. 168. Lawrence Erlbaum Associates, Inc, Hillsdale, NJ, USA.
9. CREUGERS, N.H., DE KANTER, R.J., VERZIJDEN, C.W. & VAN'T HOF, M.A. (1998) Risk factors and multiple failures in posterior resin-bonded bridges in a 5-year multi-practice clinical trial. Journal of Dentistry, 26, 397.
10. CREUGERS, N.H., KAYSER, A.F. & VAN'T HOF, M.A. (1992) A seven-and-a-half-year survival study of resin-bonded bridges. Journal of Dental Research, 71, 1822.
11. CREUGERS, N.H., SNOEK, P.A., VAN'T HOF, M.A. & KAYSER, A.F. (1990) Clinical performance of resin-bonded bridges: a 5-year prospective study. Part III: failure characteristics and survival after rebonding. Journal of Oral Rehabilitation, 17, 179.
12. DARVELL, B.W. (1998) Materials Science for Dentistry, 5th edn, p. 124. BW Darvell, Hong Kong.
13. DONOVAN, T.E. (1999) Contemporary evaluation of dental cements. Compendium of Continuing Education in Dentistry, 20, 197.
14. DUNNE, S.M. & MILLAR, B.J. (1993) A longitudinal study of the clinical performance of resin bonded bridges and splints. British Dental Journal, 174, 405.
15. ELYASHEVICH, G.K., KARPOV, E.A., LAVRENTIEV, V.K., PODDUBNY, V.I., GENINA, M.A. & ZABASHTA, Y.F. (1993) Changes in the amorphous phase of polyethylene upon high extension. International Journal of Polymeric Materials, 22, 191.
16. FERRACANE, J.L., BERGE, H.X. & CONDON, J.R. (1998) In vitro aging of dental composites in water - effect of degree of conversion, filler volume, and filler/matrix coupling. Journal of Biomedical Materials Research, 42, 465.
17. FITCHIE, J.G., ZARDIACKAS, L.D., GIVAN, D.A., ANDERSON, L. & CAUGHMAN, W.F. (1993) Tensile fatigue of two composite cements bonding three base metal alloys to bovine enamel. Denalt Materials, 9, 28.
18. FRANKENBERGER, R., KRAMER, N. & PETSCHELT, A. (1999) Fatigue behaviour of different dentin adhesives. Clinical Oral Investigations, 3, 11.
19. GIVAN, D.A., FITCHIE, J.G., ANDERSON, L. & ZARDIACKAS, L.D. (1995) Tensile fatigue of 4-META cement bonding three base metal alloys to enamel and comparison to other resin cements. Journal of Prosthetic Dentistry, 73, 377.
20. GOLDSTEIN, J.I., NEWBURY, D.E., ECHLIN, P., JOY, D.C., ROMIG, A.D., LYMAN, C.E., FIORI, C. & LIFSNIN, E. (1992) Scanning Electron Microscopy and X-ray Microanalysis, 2nd edn, p. 69. Plenum Press, New York, USA.
21. GOODKIND, R.J. & HERINGLAKE, C.B. (1973) Mandibular flexure in opening and closing movements. Journal of Prosthetic Dentistry, 30, 134.
22. GOPFERICH, A. (1996) Mechanisms of polymer degradation and erosion. Biomaterials, 17, 103.
23. GUMBSCH, P. (1996) On the response of dynamic cracks to increasing overload. In: Symposium Q: Fracture - Instability Dynamics, Scaling, and Ductile/Brittle Behavior Materials Research Society Symposium Proceedings, pp. 297. Materials Research Society, Pittsburgh, PA, USA.
24. HAMMANT, B. (1971) The use of 4-point loading tests to determine mechanical properties. Composites, 2, 246.
25. HARGREAVES, A.S. (1983) The effects of cyclic stress on dental polymethylmethacrylate. II. Flexural fatigue. Journal of Oral Rehabilitation, 10, 137.
26. HORIUCHI, M., ICHIKAWA, T., NODA, M. & MATSUMOTO, N. (1997) Use of interimplant displacement to measure mandibular distortion during jaw movements in humans. Archives of Oral Biology, 42, 185.
27. INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (1988) ISO 4049 Resin-based filling materials.
28. KINLOCH, A.J. & YOUNG, R.J. (1983) Fracture Behaviour of Polymers, p. 74. Applied Science Publishers, London.
29. KNOBLOCH, L.A., KERBY, R.E., MCMILLEN, K. & CLELLAND, N. (2000a) Solubility and sorption of resin-based luting cements. Operative Dentistry, 25, 434.
30. KNOBLOCH, L.A., KERBY, R.E., SEGHI, R., BERLIN, J.S. & LEE, J.S. (2000b) Fracture toughness of resin-based luting cements. Journal of Prosthetic Dentistry, 83, 204.
31. KRUG, H., KARBACH, A. & PETERMANN, J. (1984) Plastic deformation and subsequent crystallinization of thin films of isotactic/atactic polystyrene (iPS/aPS) blends. Polymer, 25, 1687.
32. KURARAY CO, L. (1999) Panavia Technical Information. Osaka, Japan.
33. LI, Z.C. & WHITE, S.N. (1999) Mechanical properties of dental luting cements. Journal of Prosthetic Dentistry, 81, 597.
34. MA, R. & NEGAHBAN, M. (1995) Simulation of mechanical response during polymer crystallization around rigid inclusions and voids: homogeneous crystallization. Mechanics of Materials, 21, 25.
35. MANZUR, A. & MCINTYRE, D. (1988) Strain-induced crystallization in Cis- and trans-polyisoprene blends. Journal of Macromolecular Science-Physics, 27, 79.
36. MEIERS, J.C., JENSEN, M.E. & MAYCLIN, T. (1985) Effect of surface treatments on the bond strength of etched-metal resin-bonded retainers. Journal of Prosthetic Dentistry, 53, 185.
37. MICHALSKE, T.A. & FREIMAN, S.W. (1982) A molecular interpretation of stress corrosion in silica. Nature, 295, 511.
38. MONTES, G.G. & DRAUGHN, R.A. (1987) Slow crack propagation in composite restorative materials. Journal of Biomedical Materials Research, 21, 629.
39. NAKAMURA, K., HATAKEYAMA, T. & HATAKEYAMA, H. (1983) Relationship between hydrogen bonding and bound water in polyhydroxystyrene derivatives. Polymer, 24, 871.
40. NEGAHBAN, M., WINEMAN, A.S. & MA, R. (1993) Simulation of mechanical response in polymer crystallization. International Journal of Engineering Science, 31, 93.
41. RATNER, B.D., SCHOEN, F.J. & LEMONS, J.E. (1996) Biomaterials Science, p. 243. Academic Press, Inc, San Diego.
42. ROULIN-MOLONEY, A.C. (1989) Fractography and Failure Mechanisms of Polymers and Copolymers, p. 241, 261. Elsevier, London.
43. RUDD, K.D., O'LEARY, T.J. & STUMPEJ, J.R. (1964) Horizontal tooth mobility in carefully screened subjects. Periodontics, 2, 65.
44. SAMAMA, Y. (1995) Fixed bonded prosthodontics: a 10-year follow-up report. Part I: analytical overview. International Journal of Periodontics and Restorative Dentistry, 15, 424.
45. SHILLINGBURG, H.T. JR, HOBO, S., WHITSETT, L.D., JACOBI, R. & BRACKETT, S.E. (1997) Fundamentals of Fixed Prosthodontics, 3rd edn, p. 93. Quintessence Publishing Co, Chicago, IL, USA.
46. SIESLER, H.W. (1988) Rheo-Optical Fourier-Transform Infrared Spectroscopy of Polymers: 14. Segmental Orientation and Strain-Induced Crystallization of a Poly(Ether Urethaneurea) Elastomer. Berichte der Bunsen Gesellschaft Fur Physikalische Chemie - An International Journal of Physical Chemistry, 92, 641.
47. SMUTZ, W.P., DANIELS, A.U., ANDRIANO, K.P., FRANCE, E.P. & HELLER, J. (1991) Mechanical test methodology for environmental exposure testing of biodegradable polymers. Journal of Applied Biomaterials, 2, 13.
48. SÖDERHOLM, K.J. (1985) Filler systems and resin interface. In: Posterior Composite Resin Dental Restorative Materials (eds G. Vanherle & D. C. Smith), pp. 139. 3M co, st Paul, MN, USA.
49. SÖDERHOLM, K.J. & ROBERTS, M.J. (1990) Influence of water exposure on the tensile strength of composites. Journal of Dental Research, 69, 1812.
50. SÖDERHOLM, K.J., ZIGAN, M., RAGAN, M., FISCHLSCHWEIGER, W. & BERGMAN, M. (1984) Hydrolytic degradation of dental composites. Journal of Dental Research, 63, 1248.
51. SPERLING, L.H. (2001) Introduction to Physical Polymer Science, 3rd edn, p. 201. John Wiley & Sons, Inc, New York, USA.
52. STANDLEE, J.P. & CAPUTO, A.A. (1988) Load transfer by fixed partial dentures with three abutments. Quintessence International, 19, 403.
53. TERMONIA, Y. & SMITH, P. (1988) Kinetic model for tensile deformation of polymers. 2. Effects of entanglement spacing. Macromolecules, 21, 2184.
54. TILLITSON, E.W., CRAIG, R.G. & PEYTON, F.A. (1971) Experimental stress analysis of fixed partial dentures by use of a dynamic method. Journal of Dental Research, 50, 422.
55. TOHGO, K., FUKUHARA, D., HADANO, A. & ISHII, H. (1998) Influence of debonding damage on mechanical performance of glass particle reinforced nylon 66 composites. In: Fatigue, Environmental Factors, and New Materials American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, p. 331. ASME, Fairfield, NJ, USA.
56. VERZIJDEN, C.W., CREUGERS, N.H. & MULDER, J. (1994) A multi-practice clinical study on posterior resin-bonded bridges: a 2.5-year interim report. Journal of Dental Research, 73, 529.
57. WALKER, M.P. (2001) Mechanical Property Characterization of Resin Cement after Aqueous Aging with or without Dynamic Loading, PhD Dissertation: University of Missouri-Kansas City, MO, USA.
58. WILLIAMS, J.G. & PAVAN, A. (2000) Fracture of Polymers, Composites, and Adhesives, p. 227. Elsevier Science Ltd, New York, USA.
59. WOOD, M., KERN, M., THOMPSON, V.P. & ROMBERG, E. (1996) Tenyear clinical and microscopic evaluation of resin-bonded restorations. Quintessence International, 27, 803.
60. YAMASHITA, J., SHIOZAWA, I., TAKAKUDA, K. & MIYAIRI, H. (1998) Deformation of restoration and fracture of luting cement film. Journal of Dentistry, 26, 459.
61. YOUNG, R.J. & BEAUMONT, P.W. (1975) Failure of brittle polymers by slow crack growth; II. Failure processes in silica particle-filled epoxy resin composite. Journal of Materials Science, 10, 1343.
62. ZIADA, H.M., BENINGTON, I.C. & ORR, J.F. (1995) Photoelastic stress analysis in resin bonded bridge design. European Journal of Prosthodontics and Restorative Dentistry, 3, 217.
63. ZIADA, H.M., ORR, J.F. & BENINGTON, I.C. (1998) Photoelastic stress analysis in a pier retainer of an anterior resin-bonded fixed partial denture. Journal of Prosthetic Dentistry, 80, 661.
64. ZIDAN, O., ASMUSSEN, E. & JORGENSEN, K.D. (1982) Microscopical analysis of fractured restorative resin/etched enamel bonds. Scandinavian Journal of Dental Research, 90, 286.