Seismic resistance and mechanical behaviour of exterior beam-column joints with crossed inclined bars

Structural Engineering and Mechanics

Volumn 16, Issue 4, 2003, Pages 493-517

  Bakir, P G ^a  

^a ISTANBUL TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Anchorage; Beams; Bond (concrete to reinforcement); Columns; Connections; Crossed inclined bars; Cyclic loads; Deformation; Earthquake resistant structures; Joints; Mechanical behaviour; Reinforced concrete; Shear properties; Shear strength; Structural analysis; Strut and tie models

Indexed keywords

ANCHORAGES (FOUNDATIONS); BOND STRENGTH (MATERIALS); COLUMNS (STRUCTURAL); CONCRETE BEAMS AND GIRDERS; CONCRETE REINFORCEMENTS; CYCLIC LOADS; EARTHQUAKE RESISTANCE; JOINTS (STRUCTURAL COMPONENTS); MATHEMATICAL MODELS; REINFORCED CONCRETE; SHEAR STRENGTH; SHEAR STRESS;

CROSSED INCLINED BARS; EARTHQUAKE RESISTANT STRUCTURES; MECHANICAL BEHAVIOUR;

STRUCTURAL ANALYSIS;

EID: 0141842569     PISSN: 12254568     EISSN: None     Source Type: Journal    
DOI: 10.12989/sem.2003.16.4.493     Document Type: Article

References (36)

1. ACI-ASCE Commettee 352R-91 (1998), "Recommendations for the design of beam-column joints in monolithic, reinforced concrete structures", ACI Manual of Concrete Practice; Part 3, Detroit, American Concrete Institutue, 1998
2. ACI Committee 318 (1995), "Building code requirements for structural concrete (ACI 318-95) and commentary (318R-95)", American Concrete Institute, Farmington Hills, Michigan, 369pp.
3. Alameddine, F.F. (1990), "Seismic design recommendation for high strength concrete beam-to-column connections", PhD Thesis, University of Arizona, 257pp.
4. Architectural Institute of Japan (1990), "Design guidelines for earthquake resistant reinforced concrete buildings based on ultimate strength concept and commentary", 340pp.
5. Bakir, P.G. (2003a), "A proposal for national mitigation strategy in Turkey", Submitted to Natural Hazards Journal for Possible Publication.
6. Bakir, P.G. (2003b), "Shear transfer mechanisms in exterior beam-column joints", Journal of Advanced Materials, Accepted for Publication in 2003.
7. Bakir, P.G. and Boduroglu, M.H. (2002a), "Earthquake risk and hazard mitigation in Turkey", Earthquake Spectra, 18(3), 427-447, August, EERI.
8. Bakir, P.G. and Boduroglu, M.H. (2002b), "Mitigating against earthquakes in Turkey", (special paper), Proc. of the 12th European Conf. on Earthq. Eng., London, UK.
9. Bakir, P.G. and Boduroglu, M.H. (2002d), "A new design equation for predicting the shear strength of the monotonically loaded exterior-beam column joints", Eng. Struct. J., 24(8), 1105-1117, August, Elsevier Science.
10. Bakir, P.G. and Boduroglu, M.H. (2002e), "Predicting the failure modes of monotonically loaded reinforced concrete exterior beam-column joints", Struct. Eng. Mech., An Int. J., 14(3), 307-330, September, Techno-Press.
11. Boduroglu, M.H. and Bakir, P.G. (2002c), "Proposals for earthquake planning in Turkey", Proc. of the 12th European Conf. on Earthq. Eng., London, UK.
12. Collins, M.P. and Mitchell, D. (1991), Prestressed Concrete Structures, Prentice Hall, Englewood Cliffs, New Jersey, 07362.
13. Ehsani, M.R. and Wight, J.K. (1985), "Exterior reinforced concrete beam-to-column connections subjected to earthquake type loading", ACI Struct. J., 82(3), 343-349.
14. Fuji, S. and Morita, S. (1991), "Comparison between interior and exterior reinforced concrete beam-column joint behaviour", Design of Beam-Column Joints for Seismic Resistance, SP-123, J.O. Jirsa ed., American Concrete Institute, Farmington Hills, Michigan, 167-185.
15. Kaku, T. and Akasuka, H. (1991), "Ductility estimation of exterior beam-column subassemblies in reinforced concrete frames", Design of Beam-Column Joints for Seismic Resistance, SP-123, J.O. Jirsa ed., American Concrete Institute, Farmington Hills, Michigan, 167-185.
16. Kitayama, K., Otani, S. and Aoyama, H. (1991), "Development of design criteria for RC interior beam-column joints", Design of Beam-Column Joints for Seismic Resistance, SP-123-4, J.O. Jirsa ed., American Concrete Institute, Farmington Hills, Michigan, 167-185.
17. Kurose, Y. (1993), "Design of beam-column joints for shear", A Volume Honouring Hiroyuki Aoyama, University of Tokyo publications, 488.
18. Megget, L.M. (1974), "Cyclic behaviour of exterior reinforced concrete beam-column joints", Bulletin of the New Zealand National Society for Earthquake Engineering, 7(1), 27-47.
19. Pantazopoulou, S. and Bonacci, J. (1992), "Consideration of questions about beam-column joints", ACI Struct. J., 89(1), 27-39.
20. Park, R. and Paulay, T. (1975), "Reinforced concrete structures", John Wiley and Sons, New York, p.769.
21. Paulay, T. and Park, R. (1984), "Joints in reinforced concrete frames designed for earthquake resistance", Research Report 84-9, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
22. Paulay, T., Park, R. and Priestley, M.J.N. (1978), "Reinforced concrete beam-column joints under seismic actions", Journal of the ACI, Proceedings, 75(11), 585-593.
23. Paulay, T. and Priestly, M.J.N. (1992), "Seismic design of reinforced concrete and masonry buildings", John Wiley & Sons, New York, 744.
24. Paulay, T. and Scarpas, A. (1981), "Behaviour of exterior beam-column joints", Bulletin of the New Zealand National Society for Earthquake Engineering, 14, 131-144.
25. Paulay, T. (1986), "Critique of the special provisions for seismic design of the building code requirements for reinforced concrete (ACI 318-83)", ACI Struct. J., 83(2), 274-283.
26. Snedecor, G.W. and Cochran, W.G. (1980), Statistical Methods, 7th edition. Iowa State University Press, Ames.
27. The Design of Concrete Structures, NZS 3101: 1995 (1995), Standards 3101:1995, Standards New Zealand, Wellington.
28. Tegos, I.A. (1984), "Contribution to the study and improvement of earthquake-resistant mechanical properties of low slenderness structural elements", PhD Thesis, Aristotle University of Thessaloniki, 185pp. (in Greek).
29. Tsonos, A.G., Tegos, I.A. and Penelis, G. Gr. (1992), "Seismic resitance of type 2 exterior beam-column joints reinforced with inclined bars", ACI Struct. J., 89(1), 307-330.
30. Tsonos, A.G. (1997), "Shear strength of ductile reinforced concrete beam-to-column connections, for seismic resistant structures", J. European Earthq. Eng., 2, 54-64.
31. Tsonos, A.G. (1999), "Lateral load response of strengthened reinforced concrete beam-to-column joints", ACI Struct. J., 96(1), 46-56.
32. Tsonos, A.G. (2000), "Effect of vertical hoops on the behaviour of reinforced concrete beam-to-column connections", J. European Earthq. Eng., 2, 13-26.
33. Tsonos, A.G. (2001a), "Seismic retrofit of R/C beam-to-column joints using local three-sided jackets", J. European Earthq. Eng., 1, 48-64.
34. Tsonos, A.G. (2001b), "Seismic rehabilitation of reinforced concrete joints by the removal and replacement technique", J. European Earthq. Eng., 3, 29-43.
35. Uzumeri, S.M. (1977), "Strength and ductility of cast-in-place beam-column joints", Reinforced Concrete in Seismic Zones, Publication SP-53, American Concrete Institute, Detroit, 1977, 293-350.
36. Vollum, R.L. (1998), "Design and analysis of exterior beam-column connections", PhD thesis, Imperial College of Science Technology and Medicine-University of London.