Er:YAG Laser Ablation of Dental Enamel: Influence of an Optically Thick Water Layer on the Bond-Strength to Composite Resin

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 4950, Issue , 2003, Pages 91-97

  Fried, Daniel ^a   Staninec, Michal ^a   Xie, John ^a   Murphy, Colin W ^a   Le, Charles Q ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Dental enamel; Er:YAG laser; Laser ablation; Shear bond strength; Water augmentation

Indexed keywords

ADHESION; ELECTRON MICROSCOPY; ETCHING; FOURIER TRANSFORM INFRARED SPECTROSCOPY; LASER PULSES; OPTICAL MICROSCOPY; SOLID STATE LASERS; TOOTH ENAMEL;

COMPOSITE RESINS;

LASER ABLATION;

EID: 0141829029     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.482333     Document Type: Conference Paper

References (26)

1. C. Cozean, C. J. Arcoria, J. Pelagalli, and L. Powell, "Dentistry for the 21st Century:Er:YAG Laser for Teeth", JADA, 128, pp. 1079-1086 (1997).
2. I. M. Rizoiu and L. G. DeShazer, "New laser-matter interaction concept to enhance hard tissue cutting efficiency", Laser-Tissue Interaction V, Vol. 2134A, pp. 309-317, San Jose (1994).
3. B. Majaron, D. Sustercic, and M. Lukac, "Influence of Water Spray on Er:YAG Ablation of Hard Dental Tissues", Medical Applications of Lasers in Dermatology, Opthalmology, Dentistry, and Endoscopy, Vol. 3192, pp. 82-87, SPIE, San Remo (1997).
4. G. B. Altshuler, A. V. Belikov, and Y. A. Sinelnik, "A laser-abrasive method for the cutting of enamel and dentin", Lasers Surg. Med., 28, pp. 435-444 (2001).
5. R. J. Freiberg and C. D. Cozean, "Pulsed erbium laser ablation of hard dental tissue: the effects of atomized water spray vs water surface film", Lasers in Dentistry VIII, Vol. 4610, pp. 74-84, SPIE, San Jose (2002).
6. H. A. Wigdor, J. T. Walsh, and S. R. .Visuri, "Effect of water on dental material ablation of the Er:YAG laser", Lasers in Surgery: Advanced Characterization, Therapeutics, and Systems IV, Vol. 2128, SPIE, (1994).
7. M. Majaron, D. Sustercic, and M. Lukac, "Influene on water spray on Er:YAG ablation of hard dental tissues", Medical Applications of Lasers in Dermatology, Opthamology, dentistry and Endoscopy, Vol. 3192, SPIE, San Jose (1997).
8. M. Zeck, H. Benthin, T. Ertl, G. K. Siebert, and G. Muller, "Scanning ablation of dental hard tissue with erbium laser radiation", Medical Applications of Lasers III, Vol. 2623, pp. 94-102, (1996).
9. P. Rechmann, D. S. Glodin, and T. Hennig, "Changes in surface morphology of enamel after Er:YAG irradiation", Lasers in Dentistry IV, Vol. 3248, pp. 62-68, SPIE, San Jose (1998).
10. D. Fried, N. Ashouri, T. M. Breunig, and R. K. Shori, "Mechanism of Water Augmentation during IR Laser Irradiation of Dental Enamel", Lasers Surg. Med., 31, pp. 186-193 (2002).
11. P. Rechmann, D. S. Glodin, and T. Hennig, "Er:YAG laser in Dentistry:An Overview", Lasers in Dentistry IV, Vol. 3248, pp. 2-13, SPIE, San Jose (1998).
12. T. Eguro, T. Maeda, M. Tanabe, M. Otsuki, and H. Tanaka, "Adhesion of Composite Resins to Enamel Irradiated by the Er:YAG Laser: Application of the Ultrasonic Sealer on Irradiated Surface", Lasers Surg. Med., 28, pp. 365-370 (2001).
13. M. Otsuki, T. Eguro, T. Maeda, and H. Tanaka, "Comparison of the Bond Strength of composite resin to Er:YAG laser irradiated Human Enamel Pre-treated with Various Methods In vitro", Lasers Surg. Med., 28, pp. 351-359 (2002).
14. A. R. Yazici, M. Frentzen, and B. Dayangac, "In vitro analysis of the effects of acid or laser etching on microleakage around composite resin restorations", J Dent, 29(5), pp. 355-61 (2001).
15. T. Eguro, T. Maeda, M. Tanabe, M. Otsuki, and H. Tanaka, "Adhesion of composite resins to enamel irradiated by the Er:YAG laser: application of the ultrasonic scaler on irradiated surface", Lasers Surg Med. 28(4), pp. 365-70 (2001).
16. A. Martinez-Insua, L. Da Silva Dominguez, F. G. Rivera, and U. A. Santana-Penin, "Differences in bonding to acid-etched or Er:YAG-laser-treated enamel and dentin surfaces", J Prosthet Dent, 84(3), pp. 280-8 (2000).
17. J. A. von Fraunhofer, D. J. Allen, and G. M. Orbell, "Laser etching of enamel for direct bonding", Angle Orthod, 63(1), pp. 73-6 (1993).
18. U. Keller and R. Hibst, "Effects of Er:YAG laser on enamel bonding of composite materials", Lasers in orthopedic, Dental, and Veterinary Medicine II, Vol. 1880, pp. 163-165, SPIE, Los Angeles, CA (1993).
19. M. Majaron, D. Sustercic, and M. Lukac, "Fiber-tip drilling of hard dental tissues with Er:YAG laser", Lasers in Dentistry IV, Vol. 3248, pp. 69-77, SPIE, San Jose (1998).
20. M. Forrer, M. Ith, M. Frenz, V. Romano, H. P. Weber, A. Silenok, and V. I. Konov, "Mechanism of channel propagation in water by pulsed erbium laser radiation", Laser interaction with hard and soft tissue, Vol. 2077, pp. 104-112, SPIE, Budapest, Hungary (1993).
21. K. L. Vodop'yanov, "Bleaching of water by intense light at the maximum of the λ∼3 μm absorption band." Sov. Phys. JETP, 70(1), pp. 114-347 (1990).
22. H. Loertscher, W. Q. Shi, and W. S. Grundfest, "Tissue ablation through water with erbium:YAG lasers", IEEE Trans. Biomed. Eng., 39(1), pp. 86-88 (1992).
23. D. Fried, J. Xie, S. Shafi, J. D. B. Featherstone, T. Breunig, and C. Q. Lee, "Early detection of dental caries and lesion progression with ploarization sensitive optical coherence tomography", J. Biomed. Optics, 7(4), pp. 618-627 (2002).
24. W. R. McKinney, C. J. Hirschmugl, H. A. Padmore, T. Lauritzen, N. Andresen, G. Andronaco, R. Patton, and M. Fong, "The First Infrared Beamline at the ALS:Design, Construction, and Initial Commissioning", Accelerator-Based Infrared Sources and Applications, Vol. 3153, pp. 59-67, SPIE, (1997).
25. L. G. Watanabe, G. W. Marshall, and S. J. Marshall, "Variables Influence on shear bond strength testing to dentin", Advanced Adhesive Dentistry, 3rd International Kuraray Symposium, edited by J. Tagami, M. Toledano and C. Prati, Vol. Granada International Symposium, pp. 75-90, Kuraray Co. Ltd., (1999).
26. M. M. Stark, "High-speed Dental Handpieces:Properties and Performance", Evaluation: Reports from the Product Evaluation Laboratory University of California, San Francisco, IV(1), pp. 1-8 (1987).