Multiaxial constitutive model accounting for the strength-differential in Inconel 718

International Journal of Plasticity

Volumn 19, Issue 12 SPEC ISS., 2003, Pages 2055-2081

  Iyer, Saiganesh K ^a   Lissenden, Cliff J ^b  

^a SIEMENS POWER GENERATION   (United States)

^b PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

A. Thermomechanical processes; B. Elasto viscoplastic material; C. Mechanical testing; Thermodynamics

Indexed keywords

COMPACTION; ELASTOPLASTICITY; MECHANICAL TESTING; PLASTIC FLOW; SHEAR STRENGTH; THERMODYNAMICS; THERMOMECHANICAL TREATMENT; VISCOPLASTICITY;

THRESHOLD FUNCTIONS;

NICKEL ALLOYS;

EID: 0141761211     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(03)00059-7     Document Type: Conference Paper

References (69)

1. Altenbach H., Stoychev G.B., Tushtev K.N. On elastoplastic deformation of grey cast iron. Int. J. Plasticity. 17:2001;719.
2. Arnold S.M., Saleeb A.F. On the thermodynamic framework of generalized coupled thermoelastic-viscoplastic-damage modeling. Int. J. Plasticity. 10:1994;263.
3. Arnold S.M., Saleeb A.F., Wilt T.E. A modeling investigation of thermal and strain induced recovery and nonlinear hardening in potential based viscoplasticity. J. Eng. Mat. Technol. 117:1995;157.
4. Arnold S.M., Saleeb A.F., Castelli M.G. A fully associative, nonlinear kinematic, unified viscoplasticity model for titanium based matrices. Johnson W.S., Larsen J.M., Cox B.N. Life Prediction Methodology for Titanium Matrix Composites (ASTM-STP 1253). 1996;231-256 American Society for Testing and Materials, Philadelphia.
5. Betten J., Shin C.H. Inelastic analysis of plastic compressible materials using the viscoplastic model. Int. J. Plasticity. 8:1992;977.
6. Bhanu Sankara Rao K., Kalluri S., Halford G.R., McGaw M.A. Serrated flow and deformation substructure at room temperature in Inconel 718 superalloy during strain controlled fatigue. Scripta Met. 32:1995;293.
7. Bocher L., Delobelle P., Robinet P., Feaugas X. Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension-torsion-internal and external pressure. Int. J. Plasticity. 2001:2001;1491.
8. Bridgman P.W. Studies in Large Plastic Flow and Fracture. 1952;McGraw-Hill, New York.
9. Brünig M. Numerical simulation of the large elastic-plastic deformation behavior of hydrostatic stress-sensitive solids. Int. J. Plasticity. 15:1999;1237.
10. Brünig M. Numerical analysis and large strain elastic-viscoplastic behavior of hydrostatic stress-sensitive metals. Int. J. Solids Struct. 38:2001;635.
11. Brünig M., Berger S., Obrecht H. Numerical simulation of the localization behavior of hydrostatic-stress-sensitive metals. Int. J. Mech. Sci. 42:2000;2147.
12. Bulatov V.V., Richmond O., Glazov M.V. An atomistic dislocation mechanism of pressure-dependent plastic flow in aluminum. Acta Mater. 47:1999;3507.
13. Casey J., Sullivan T.D. Pressure dependency, strength-differential effect, and plastic volume expansion in metals. Int. J. Plasticity. 1:1985;39.
14. Chaboche J.L. Viscoplastic constitutive equations for the description of cyclic and anisotropic behavior of metals. Bull. Acad. Polon. Sci. Ser. Sci. Tech. 25:1977;33.
15. Chait R. Factors influencing the strength differential of high strength steels. Metall. Trans. 3:1972;365.
16. Chait R. The strength differential of steel and Ti alloys as influenced by test temperature and microstructure. Scripta Metall. 7:1973;351.
17. Coret M., Calloch S., Combescure A. Experimental study of the phase transformation plasticity of 16MND5 low carbon steel under multiaxial loading. Int. J. Plasticity. 18:2002;1707.
18. Drucker D.C. Relation of experiments to mathematical theories of plasticity. J. Appl. Mech. 16:1949;349.
19. Drucker, D.C., 1951. A more fundamental approach to plastic stress-strain relations. In: Proc. First U.S. Nat. Congr. Appl. Mech., p. 487.
20. Drucker D.C., Prager W. Soil mechanics and plastic analysis or limit design. Q. Appl. Math. 10:1952;157.
21. Gil C.M., Lissenden C.J., Lerch B.A. Yield of Inconel 718 by axial-torsional loading at temperatures up to 649C. J. Testing Evaluation. 27:1999;327.
22. Gil C.M., Lissenden C.J., Lerch B.A. Unusual nonlinear response of some metallic materials. Mech. Materials. 31:1999;565.
23. Gotoh M., Yamashita M. An aspect of plasticity with compressibility. Int. J. Plasticity. 19:2003;383.
24. Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth. J. Engr. Mater. Technol. 99:1977;2.
25. Hecker S.S. Experimental studies of yield phenomena in biaxially loaded metals. Stricklin J.A., Saczalski K.J. Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects. 1976;1-33 ASME, New York.
26. Hohenemser K., Prager W. Uber die ansalze der mechanik isotroper kontinua. Z. Angew. Math. Mech. 12:1932;216.
27. 3 theory of viscoplasticity for high temperature viscoplastic isotropic materials. MSc Thesis, The University of Akron, Akron, OH.
28. Iyer, S.K., 2000. Viscoplastic model development to account for strength differential: application to aged Inconel 718 at elevated temperature. PhD Thesis, The Pennsylvania State University, University Park, PA.
29. Iyer S.K., Lissenden C.J. Inelastic anisotropy of Inconel 718. experiments and mathematical representation J. Eng. Mat. Technol. 122:2000;321.
30. Iyer S.K., Lissenden C.J., Arnold S.M. Local and overall flow in composites predicted by micromechanics. Composites B. 31:2000;327.
31. Janosik, L.A., Duffy, S.F., 1997. A viscoplastic constitutive theory for monolithic ceramic materials - I. In: Materials Processing, Characterization, and Modeling (PPM) and Other Propulsion Research and Technology, NASA Conference Publication 10193 part I. NASA Lewis Research Center, Cleveland, OH.
32. Jordan E.H., Walker K.P. A viscoplastic model for single crystals. J. Engng. Mater. Technol. 114:1992;19.
33. Kalish D., Cohen M. Anisotropy of properties in martensite as developed by thermomechanical treatments. ASM Trans. Quart. 62:1969;353.
34. Kawai M. Constitutive modeling of creep and damage behaviors of the non-Mises type for a class of polycrystalline metals. Int. J. Damage Mech. 11:2002;223.
35. Khan A., Huang S. Continuum Theory of Plasticity. 1995;John Wiley & Sons, New York.
36. Kuroda M., Kuwabara T. Shear-band development in polycrystalline metal with strength-differential effect and plastic volume expansion. Proc. R. Soc. Lond. A. 458:2002;2243.
37. Kuwabara T., Van Bael A., Iizuka E. Measurement and analysis of yield locus and work hardening characteristics of steel sheets with different r-values. Acta Mater. 50:2002;3717.
38. Leslie W.C., Sober R.J. The strength of ferrite and of martensite as functions of composition, temperature and strain rate. ASM Trans. Quart. 60:1967;459.
39. Lewandowski, J.J., Wesseling, P., Prabhu, N.S., Larose, J., Lerch, B.A., 2003. Strenght differential measurements in IN-718: effects of superimposed pressure. Met. Mat. Trans. A in press.
40. Lewandowski J.J., Lowhaphandu P. Effects of hydrostatic pressure on mechanical behaviour and deformation processing of materials. Int. Materials Reviews. 43:1998;145.
41. Lewis R.W., Khoei A.R. A plasticity model for metal powder forming processes. Int. J. Plasticity. 17:2001;1659.
42. Lissenden C.J., Arnold S.M., Iyer S.K. Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures. Int. J. Plasticity. 16:2000;1049.
43. Lissenden C.J., Arnold S.M., Saleeb A.F. Plastic coupling and stress relaxation during nonproportional axial-shear strain-controlled loading. J. Pressure Vessel Technol. 123:2001;81.
44. Lissenden C.J., Lerch B.A., Ellis J.R., Robinson D.N. Experimental determination of yield and flow surfaces under axial-torsional loading. Kalluri S., Bonacuse P.J. Multiaxial Fatigue and Deformation Testing Techniques (ASTM STP 1280). 1997;92-112 American Society for Testing and Materials, Philadelphia.
45. Lubarda V.A., Mastilovic S., Knap J. Some comments on plasticity postulates and non-associative flow rules. Int. J. Mech. Sci. 38:1996;247.
46. Lubliner J. Plasticity Theory. 1990;Macmillan, New York.
47. Mahler L., Ekh M., Runesson K. A class of thermo-hyperelastic-viscoplastic models for porous materials. theory and numerics Int. J. Plasticity. 17:2001;943.
48. Mahnken R. Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity. Comput. Methods Appl. Mech. Engng. 190:2001;5057.
49. Maugin G.A. The Thermomechanics of Plasticity and Fracture. 1992;Cambridge University Press, Cambridge.
50. Meyer L.W., Abdel-Malek S. Strain rate dependence of strength-differential effect in two steels. J. Phys. IV France. 10:2000;63.
51. Michno M.J., Findley W.N. An historical perspective of yield surface investigations for metals. Int. J. Non-Linear Mechanics. 11:1976;59.
52. Needleman A., Rice J.R. Limits to ductility set by plastic flow localization. Koistinen D.P., Wang N.M. Mechanics of Sheet Metal Forming. 1978;237-267 Plenum Press, New York.
53. Perzyna P. The constitutive equations for rate sensitive plastic materials. Q. Appl. Math. 20:1963;321.
54. Rauch G.C., Leslie W.C. The extent and nature of the strength-differential effect in steels. Metall. Trans. 3:1972;373.
55. Robinson D.N. A Nonlinear Plasticity Model for Structural Alloys at Elevated Temperature (ORNL/TM-6582). 1978;Oak Ridge National Laboratory, Oak Ridge, TN.
56. Robinson, D.N., Ellis, J.R., 1986. A multiaxial theory of viscoplasticity for isotropic materials. In: Turbine Engine Hot Section Technology. NASA Conference Publication 2444. NASA Lewis Research Center, Cleveland, OH, p. 832.
57. Saleeb A.F., Gendy A.S., Wilt T.E., Trowbridge D.A. Constitutive Material Parameter Estimator User's Guide. 1998;The University of Akron, Akron, OH.
58. Saleeb A.F., Wilt T.E. Analysis of the anisotropic viscoplastic-damage response of composite laminates - continuum basis and computational algorithms. Int. J. Numerical Methods Engng. 36:1993;1629.
59. Singh A.P., Padmanabhan K.A., Pandey G.N., Murty G.M.D., Jha S. Strength differential effect in four commercial steels. J. Matl. Sci. 35:2000;1379.
60. Spitzig W.A., Sober R.J., Richmond O. Pressure dependence of yielding and associated volume expansion in tempered martensite. Acta Metall. 23:1975;885.
61. Spitzig W.A., Sober R.J., Richmond O. The effect of hydrostatic pressure on the deformation behavior of maraging and HY-80 and its implications for plasticity. Metall. Trans. A. 7:1976;1703.
62. Spitzig W.A., Richmond O. The effect of pressure on the flow stress of metals. Acta Metall. 32:1984;457.
63. Stoughton T.B. A non-associated flow rule for sheet metal forming. Int. J. Plasticity. 18:2002;687.
64. Theocaris P.S. Failure criteria for isotropic bodies revisited. Engng. Fracture Mechanics. 51:1995;239.
65. Walker K.P., Jordan E.M. Biaxial constitutive modelling and testing of a single crystal superalloy at elevated temperatures. Brown M.W., Miller K.J. Biaxial and Multiaxial Fatigue (EGF3). 1989;145-170 Mechanical Engineering Publications, London.
66. Willam K.J., Warnke E.P. Constitutive model for the triaxial behavior of concrete. International Association for Bridge Structure Engineering Proceedings. 19:1975;1.
67. Wilson C.D. A critical reexamination of classical metal plasticity. J. Appl. Mech. 69:2002;63.
68. Yaguchi M., Yamamoto M., Ogata T. A viscoplastic constitutive model for nickel-base superalloy, part I: kinematic hardening rule of anisotropic dynamic recovery. Int. J. Plasticity. 18:2002;1083.
69. Yaguchi M., Yamamoto M., Ogata T. A viscoplastic constitutive model for nickel-base superalloy, part II: modeling under anisothermal conditions. Int. J. Plasticity. 18:2002;1111.