Residual stresses in cold axisymmetric forging

Journal of Materials Processing Technology

Volumn 142, Issue 1, 2003, Pages 256-266

  Mungi, M P ^a   Rasane, S D ^a   Dixit, P M ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

Author keywords

Axisymmetric forging; Finite element analysis; Metal forming; Residual stresses

Indexed keywords

ELASTOPLASTICITY; FRICTION; LAGRANGE MULTIPLIERS; NONLINEAR EQUATIONS; PLASTIC DEFORMATION; RESIDUAL STRESSES; STRAIN; STRESS CONCENTRATION;

INTERFACIAL FRICTION;

FORGING;

EID: 0141755104     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0924-0136(03)00569-7     Document Type: Article

References (31)

1. S.N. Varadhan, Dynamic large deformation elasto-plastic analysis of continua, M.Tech. Thesis, Mechanical Engineering Department, IIT Kanpur, 1997.
2. Majerus J.N. Qualitative data for precision, closed die forging via line averaged residual plastic strains. Int. J. Mach. Tools Manuf. 37(5):1997;657-667.
3. T. Altan, Computer simulation to predict load, stress, and metal flow in an axisymmetric closed die forging, in: A.L. Hoffmanner (Ed.), Metal Forming, Plenum Press, New York, 1971, pp. 249-274.
4. Hill R., Lee E.H., Tupper S.J. A method of numerical analysis of plastic flow in plane strain and its application to the compression of a ductile material between rough plates. Trans. ASME, J. Appl. Mech. 73:1923;46-52.
5. Green A.P. A theoretical investigation of the compression of a ductile material between smooth flat dies. Philos. Mag. 42:1951;900-918.
6. Kudo H. Some analytical and experimental studies of axisymmetric cold forging and extrusion, I and II. Int. J. Mech. Sci. 2:1960;102-127.
7. B. Avitzur, Metal Forming: Processes and Analysis, McGraw-Hill, New York, 1968.
8. Lee C.H., Kobayashi S. Analysis of axisymmetric upsetting and plane strain side-pressing of solid cylinders by finite element method. Trans. ASME, J. Eng. Ind. 93:1971;445-454.
9. S.N. Shah, C.H. Lee, S. Kobayashi, Compression of tall, circular, solid cylinders between parallel flat dies, in: Proceedings of the International Conference on Production Engineering, Tokyo, 1974, pp. 295-300.
10. C.C. Chen, S. Kobayashi, Rigid-plastic finite-element analysis of ring compression, in: H. Armen, R.F. Jones Jr. (Eds.), Application of Numerical Methods to Forming Processes, Proceedings of the Winter Annual Meeting of ASME, AMD, vol. 28, 1978, pp. 163-174.
11. Oh S.I., Kobayashi S. Workability of aluminium alloy 7075-t6 in upsetting and rolling. Trans. ASME, J. Eng. Ind. 98:1976;800-806.
12. Hartley P., Sturgess C.E.N., Rowe G.W. Friction in finite element analysis of metal forming process. Int. J. Mech. Sci. 21:1979;301-311.
13. Hartley P., Sturgess C.E.N., Rowe G.W. Influence of friction on the prediction of forces, pressure distributions and properties in upset forging. Int. J. Mech. Sci. 22:1980;743-753.
14. S. Shima, K. Mori, K. Osakada, Analysis of metal forming by the rigid-plastic finite element method based on plasticity theory for porous metals, in: H. Lippmann (Ed.), Metal Forming Plasticity, Springer, Berlin, 1978, pp. 305-317.
15. S. Kobayashi, S.I. Oh, T. Altan, Metal Forming and the Finite-element Method, Oxford University Press, New York, 1989, Chapter 16.
16. G.W. Rowe, C.E.N. Sturgess, P. Hartley, I. Pilinger, Finite-element Plasticity and Metal-forming Analysis, Cambridge University Press, Cambridge, 1991, Chapter 5.
17. P. Hartley, I. Pilinger, C.E.N. Sturgess (Eds.), Numerical Modeling of Material Deformation Processes: Research, Development and Application, Springer, London, 1992, Chapter 9.
18. Bathe K.J., Ramm E., Wilson E.L. Finite element formulations for large deformation dynamic analysis. Int. J. Numer. Meth. Eng. 9:1975;353-386.
19. Dadras P., Thomas J.F. Jr. Analysis of axisymmetric upsetting based on flow pattern observation. Int. J. Mech. Sci. 25:1983;421-427.
20. Carter W.T. Jr., Lee D. Further analysis of axisymmetric upsetting. Trans. ASME, J. Eng. Ind. 108:1986;198-204.
21. Michel B., Boyer J.C. Elasto-visco-plastic finite-element analysis of a cold upsetting test and stress-state validation by residual-stress measurements. J. Mater. Process. Technol. 54:1995;120-128.
22. Zhao G., Wright E., Grandhi R.V. Computer aided preform design in forging using the inverse die contact tracking method. Int. J. Mach. Tools Manuf. 36(7):1996;755-769.
23. Liou J.H., Jang D.Y. Forging parameter optimization considering stress distributions in products through FEM analysis and robust design methodology. Int. J. Mach. Tools Manuf. 37(6):1997;775-782.
24. Yang D.Y., Yoo Y.H. Analysis and design of multi-blow hammer forging processes by the explicit dynamic finite element method. CIRP Ann. 46(1):1997;191-194.
25. Joun M.S., Lee S.W., Chung J.H. Finite element analysis of a multi-stage axisymmetric forging process. Int. J. Mach. Tools Manuf. 38:1998;843-854.
26. Kim H.S., Im Y.T., Geiger M. Prediction of ductile fracture in cold forging of aluminium alloy. Trans. ASME, J. Manuf. Sci. Eng. 121(3):1999;336-344.
27. Yang D.Y., Im Y.T., Yoo Y.C., Park J.J., Kim J.H., Chun M.S., Lee C.H., Lee Y.K., Park C.H., Song J.H., Kim D.Y., Hong K.K., Lee M.C., Kim S.I. Development of integrated and intelligent design and analysis system for forging processes. CIRP Ann. 49(1):2000;177-180.
28. K.J. Bathe, Finite Element Procedures, Prentice-Hall, New Delhi, 1996, Chapter 6.
29. J. Chakrabarty, Theory of Plasticity, McGraw-Hill, Singapore, 1987, Chapter 2.
30. M.A. Crisfield, Non-linear Finite Element Analysis of Solids and Structures, Essentials, vol. 1, Wiley, Chichester, 1994.
31. Park J.J., Kobayashi S. Three-dimensional finite element analysis of block compression. Int. J. Mech. Sci. 26(3):1984;165-176.