Aging dependent intrinsic fatigue crack propagation in AA2024

Advances in the Metallurgy of Aluminum Alloys

Volumn , Issue , 2001, Pages 105-118

  Li, D ^a   Gangloff, R P ^a   Bray, G H ^b   Glazov, M V ^b   Rioja, R J ^b  

^a University of Virginia   (United States)

^b ALCOA TECHNICAL CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AGING OF MATERIALS; CRACK PROPAGATION; FATIGUE OF MATERIALS; METALLOGRAPHIC MICROSTRUCTURE; PRECIPITATION (CHEMICAL); RECRYSTALLIZATION (METALLURGY); STRENGTH OF MATERIALS; VAPORS;

AGING DEPENDENT INTRINSIC FATIGUE CRACK PROPAGATION; CLUSTER STRUCTURE CHANGE; FATIGUE CRACK PROPAGATION RESISTANCE;

ALUMINUM ALLOYS;

EID: 0141621286     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (56)

1. S. Suresh, Fatigue of Materials, p. 209, Cambridge University Press, Cambridge, UK (1991)
2. S. Suresh, A.K. Vasudevan and P.E. Bretz, Metall. Trans. A, 15A, 369 (1984).
3. G.C. Garrett and J.F. Knott, Acta Metall., 23, 841 (1975)
4. J. Lindigkeit, A. Gysler and G. Lutjering, Metall. Trans. A, 12A, 1613 (1981)
5. E.A. Starke, Jr. and J.C. Williams, in Fracture Mechanics, Perspective and Directions, ASTM STP 1020, R.P. Wei and R.P. Gangloff, eds., ASTM, West Conshohocken, PA, p. 184 (1989)
6. R.D. Carter, E.W. Lee, E.A. Starke, Jr. and C.J. Beevers, Metall. Trans. A, 15A, 555 (1984)
7. F.S. Lin and E.A. Starke, Jr., Matls. Sci. Engr., 45, 153 (1980)
8. F.S. Lin and E.A. Starke, Jr., in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., p. 485, TMS-AIME, Warrendale, PA (1980)
9. J. Petit, C. Sarrazin-Baudoux and G. Henaff, in Fatigue '99, p. 2221. Higher Education Press, Beijing, China (1999)
10. J. Petit, C. Sarrazin-Baudoux and G. Henaff, in ICM8, Vol. 1, p. 3, University of Alberta, Edmonton, Canada (1999)
11. J. Petit, G. Henaff, C. Sarrazin-Baudoux and S. Lesterlin, in Advances in Fracture Research, ICF9, Vol. 3, p. 1309, Elsevier Science Ltd., Oxford, UK (1997)
12. E. Zaiken and R.O. Ritchie, Matls. Sci. Engr., 70, 151 (1985)
13. A.K. Vasudevan and S. Suresh, Metall. Trans. A, 13A, 2271, (1982)
14. D.C. Slavik, C.P. Blankenship, E.A. Starke, Jr. and R.P. Gangloff, Metall. Trans. A, 24A, 1807 (1993)
15. S.E. Stanzl, H.R. Mayer and E.K. Tschegg, Mater. Sci. Eng., A147, 45 (1991)
16. A.J. McEvily and J.L. Ganzalez Velazquez, Metall. Trans. A, 23A, 2211 (1992)
17. J. Ruiz and M. Elices, Vacuum, 45, 1069 (1994)
18. J. Ruiz and M. Elices, Acta Metall. Mater., 45, 281 (1997)
19. R.P. Gangloff, in Environment Induced Cracking of Metals, R.P. Gangloff and M.B. Ives, eds., p. 55, NACE, Houston, TX (1990).
20. R.P. Wei, P.S. Pao, R.G. Hart, T.W. Weir and G.W. Simmons, Metall. Trans., 11A, 151 (1980)
21. M. Gao, P.S. Pao and R.P. Wei, Metall. Trans. A, 19A, 1739 (1988)
22. Z. Gasem and R.P. Gangloff, in Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking, R.H. Jones, ed., p. 501, TMS, Warrendale, PA (2001)
23. R.S. Piascik and R.P. Gangloff, Metall. Trans. A, 22A, 2415 (1991)
24. R.S. Piascik and R.P. Gangloff, Metall. Trans. A, 24A, 2751 (1993)
25. D.C. Slavik and R.P. Gangloff, Acta Metall. Mater., 44, 3515 (1996)
26. J.K. Donald, Intl. J. Fatigue, 19, S191 (1997)
27. G.H. Bray and J.K. Donald, in Advances in Fatigue Crack Closure Measurement and Analysis: Second Volume, STP 1343, R.C. McClung and J.C. Newman, Jr., eds., p.57, ASTM, West Conshohocken, PA (1998)
28. R.W. Hertzberg, W.A. Herman, T. Clark and R. Jaccard, in Small Crack Test Methods, ASTM STP 1149, J.M. Larsen and J.E. Allison, eds., p. 197, ASTM, West Conshohocken, PA (1991)
29. R.W. Bush, J.K. Donald and R.J. Bucci, in Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1372, J.C. Newman and R.S. Piascik, eds., p. 269, ASTM, West Conshohocken, PA (2000)
30. E. Hornbogen and K.H. Zum Gahr, Acta Metall. Mater., 24, 581 (1976)
31. J. McKittrick, P.K. Liaw, S.I. Kwun and M.E. Fine, Metall. Trans. A, 12A, 1535 (1981)
32. K. Ranjan and R.L. Hewitt, in Advances in Fracture Research, Fracture '84, Vol. 3, p. 2025, Pergamon Press Ltd., New York, NY (1984)
33. S. Kazanjian and E.A. Starke, Jr., in Proceedings, International Conference on Fatigue Damage of Structural Materials III, Hyannis, MA, in press (2001)
34. E.A. Starke, Jr., in Aluminum Alloys-Contemporary Research and Applications, A.K. Vasudevan and R.D. Doherty, eds., p. 35, Academic Press, San Diego, CA (1989)
35. T. Sato, Matls. Sci. Forum, 331-337, 85 (2000)
36. G.H. Bray, M. Glazov, R.J. Rioja, D. Li, and R.P. Gangloff, Intl. J. of Fatigue, 23, in press (2001)
37. P.A. Lee, P.H. Citrin, P. Eisenberger and B.M. Kincaid, Rev. Mod. Physics, 53, 769 (1981)
38. R.S. Piascik and R.P. Gangloff, in Hydrogen Effects on Material Behavior, A.W. Thompson and N.R. Moody, eds., p. 409, TMS Warrendale, PA (1996)
39. R.J. Rioja and D.E. Laughlin, Acta Metall. Mater., 28, 1301 (1980)
40. J. Mustre de Leon, J.J. Rehr, S.I. Zabinsky and R.C. Albers, Phys. Rev. B, 44, 4146 (1991)
41. B. Lengeler and P.Eissenberger, Phys. Rev. B, 21, 4507 (1980)
42. M.V. Glazov and H. Weiland, Applications of EXAFS Spectroscopy in Metallurgy, Chemistry and Materials Science, Alcoa Publication No. 00-105, Nov. (2000)
43. S.P. Ringer and K. Hono, Mater. Char., 44, 101 (2000)
44. J.F. Nie, B.C. Muddle, H.I. Aaronson, S.P. Ringer, and J.P. Hirth, On the Roles of Clusters During Intragranular Nucleation in the Absence of Static Defects, Unpublished Research (2001)
45. S.P. Ringer, K. Hono, T. Sakurai and I.J. Polmear, Scripta Metall., 36, 517 (1997)
46. S.P. Ringer, R. Sakurai and I.J. Polmear, Acta Metall. Mater., 45, 3731 (1997)
47. L. Reich, S.P. Ringer and K. Hono, Phil. Mag. Letters, 79, 639 (1999)
48. A.M. Zahra, C.Y. Caraher and I.J. Polmear, Scripta Metall., 39, 1553 (1998)
49. S.P. Ringer, S.K. Caraher and I.J. Polmear, Scripta Metall., 39, 1559 (1998)
50. A.K. Mukhopadhyay, V. Singh, K.S. Prasad and C.R. Chakravorty, Acta Metall. Mater., 44, 3315 (1996)
51. S.P. Ringer, K. Hono, I.J. Polmear and T. Sakurai, Acta Metall. Mater., 44, 1883 (1996)
52. C.G. Woychik, R.J. Rioja, T.B. Massalski and D.E. Laughlin, Metall. Trans. A, 16A, 1353 (1985)
53. R.J. Rioja and D.E. Laughlin, Metall. Trans. A, 8A, 1257 (1977)
54. G.H. Bray, R.J. Bucci and R.L. Brazill, Matls. Sci. Forum, 331-337, 1413 (2000)
55. D. Taylor, A Compendium of Fatigue Thresholds and Growth Rates, p. 212, EMAS, West Midlands, UK (1985)
56. C.P. Blankenship, Jr., E. Hornbogen, and E.A. Starke, Jr., Mater. Sci. Engr. A, A169, 33 (1993)