Contributions to the theory of elasticity by Louis Napoleon George Filon as viewed in the light of subsequent developments in biharmonic problems in applied mechanics and engineering mathematics

Journal of Engineering Mathematics

Volumn 46, Issue 3-4, 2003, Pages 191-212

  Meleshko, V V ^a   Selvadurai, A P S ^b  

^a TARAS SHEVCHENKO NATIONAL UNIVERSITY OF KYIV   (Ukraine)

^b MCGILL UNIVERSITY   (Canada)

Author keywords

Biharmonic equation; Elastic cylinder; Elastic rectangle; L.N.G. Filon

Indexed keywords

ELASTICITY; MECHANICS; STRESS ANALYSIS; VISCOUS FLOW;

BIHARMONIC EQUATIONS;

COMPUTATIONAL METHODS;

ELASTICITY; MATHEMATICAL METHOD;

EID: 0141564559     PISSN: 00220833     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1025045710387     Document Type: Article

References (175)

1. L. N. G. Filon, On the elastic equilibrium of circular cylinders under certain practical systems of load. Phil. Trans. R. Soc. London A198 (1902) 147-233.
2. L. N. G. Filon, On an approximate solution for the bending of a beam of rectangular cross-section under any system of load, with special references to points of concentrated or discontinuous loading. Phil. Trans. R. Soc. London A201 (1903) 63-155.
3. G. B. Jeffery, Plane stress and plane strain in bipolar co-ordinates. Phil. Trans. R. Soc. London A221 (1920) 265-293.
4. B. de Saint-Venant, Mémoire sur la torsion des prismes, avec des considérations sur leur flexion, ainsi que sur l'équilibre intérier des solides élastiques en général, et des formules pratiques pour le calcul de leur résistance à divers efforts s'exerçant simultanément, Mém. Savants Etrang. 14 (1856) 233-560.
5. I. Tordhunter and K. Pearson, A History of the Theory of Elasticity, Vol. 1. Cambridge: Cambridge University Press ( 1886) 924 pp.
6. I. Todhunter and K. Pearson, A History of the Theory of Elasticity, Vol. 2. Cambridge: Cambridge University Press (1893) 762 pp.
7. A. E. H. Love, A Treatise on the Mathematical Theory of Elasticity. 4th edn. Cambridge: Cambridge University Press (1927) 643 pp.
8. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity. 3rd edn. New York: McGraw-Hill (1970) 567 pp.
9. S. P. Timoshenko, History of the Strength of Materials. New York: McGraw-Hill (1953) 452 pp.
10. A. P. S. Selvadurai, Partial Differential Equations in Mechanics. Vol. 2. The Biharmonic Equation, Poisson's Equation. Berlin: Springer (2000) 698 pp.
11. R. W. Little, Elasticity. Englewood Cliffs NJ: Prentice Hall (1973) 431 pp.
12. C. Truesdell, Essays in the History of Mechanics. Berlin: Springer (1968) 383 pp.
13. L. N. G. Filon, On the resistance to torsion of certain forms of shafting with special reference to the effect of keyways. Phil. Trans. R. Soc. London A193 (1900) 309-352.
14. S. P. Timoshenko, A Course on the Theory of Elasticity, Part I. St-Petersburg: Kollins (1914) 239 pp. (in Russian).
15. S. Timoshenko, Theory of Elasticity. New York: McGraw-Hill (1934) 416 pp.
16. L. N. G. Filon, On the elastic equilibrium of circular cylinders under certain practical systems of load. Proc. R. Soc. London A68 (1901) 353-358.
17. L. N. G. Filon, On an approximate solution for the bending of a beam of rectangular cross-section under any system of load, with special references to points of concentrated or discontinuous loading. Proc. R. Soc. London A70 (1902) 491-496.
18. E. G. Coker and L. N. G. Filon, A Treatise on Photo-Elasticity. Cambridge: Cambridge University Press (1931) 720 pp.
19. A. I. Lur'e, Three-Dimensional Problems of the Theory of Elasticity. London: Wiley-Interscience (1964) 493 pp.
20. A. I. Lur'e, Theory of Elasticity. Moscow: Nauka (1970) 939 pp. (in Russian).
21. K. V. Solyanik-Krassa, Axisymmetric Problems of the Theory of Elasticity. Moscow: Stroiizdat (1987) 337 pp. (in Russian).
22. N. S. Ottosen, Evaluation of concrete cylinder tests using finite-elements. Trans. ASCE, J. Eng. Mech. 110 (1984) 465-481.
23. P. Matic, G. C. Kirby and M. I. Jolles, The relation of tensile specimen size and geometry-effects to unique constitutive parameters for ductile materials. Proc. R. Soc. London A417 (1988) 309-333.
24. M. H. B. M. Shariff, An approximate analysis of infinitesimal deformations of bonded elastic mounts. J Strain Anal. Eng. 23 (1988) 115-120.
25. L. J. Zapas, G. B. McKenna and A. Brenna, An analysis of the corrections to the normal force response for the cone and plate geometry in single-step stress-relaxation experiments. J. Reology 33 (1989) 69-91.
26. B. W. Darvell, Uniaxial compression tests and the validity of indirect tensile-strength. J. Mater. Sci. 25 (1990) 757-780.
27. G. A. Gazonas and J. C. Ford, Uniaxial compression testing of M30 and JA2 gun propellants using a statistical design strategy. Exp. Mech. 32 (1992) 154-162.
28. W. Yi and C. Basavaraju, Cylindrical shells under partially distributed radial loading. Trans. ASME, J. Press. Vess. 118 (1996) 104-108.
29. K. T. Chau, Young's modulus interpreted from compression tests with end friction. Trans. ASCE, J. Eng. Mech. 123 (1997) 1-7.
30. K. T. Chau, Young's modulus interpreted from plane compressions of geomaterials between rough end blocks. Int. J. Solids Struct. 36 (1999) 4963-4974.
31. A. B. Geltmacher, P. Matic and R. K. Everett, Integrated experimental-computational characterization of TIMETAL 21S. Mater. Sci. Eng. A - Structures 272 (1999) 99-113.
32. X. X. Wei, K. T. Chau and R. H. C. Wong, Analytic solution for axial point load strength test on solid circular cylinders. Trans. ASCE, J. Eng. Mech. 125 (1999) 1349-1357.
33. K. T. Chau and X. X. Wei, Finite solid circular cylinders subjected to arbitrary surface load. Part I - Analytic solution. Int. J. Solids Struct. 37 (2000) 5707-5732.
34. K. T. Chau and X. X. Wei, A new analytic solution for the diametral point load strength test on finite solid circular cylinders. Int. J. Solids Struct. 38 (2001) 1459-1481.
35. R. G. C. Arridge and P. J. Barnham, Polymer elasticity: discrete and continuum models. Adv. Polym. Sci. 46 (1982) 67-117.
36. G. B. McKenna and L. J. Zapas, Experiments on the small-strain behavior of crosslinked natural-rubber. 2. Extension and compression. Polymer 24 (1983) 1502-1506.
37. Y. Y. Lin, C. Y. Hui and H. D. Conway, A detailed elastic analysis of the flat punch (tack) test for pressure-sensitive adhesives. J. Polym. Sci. Polym. Phys. 38 (2000) 2769-2784.
38. C. H. Hsueh, Analytical evaluation of interfacial shear-strength for fiber-reinforced ceramic composites. J. Amer. Ceram. Soc. 71 (1988) 490-493.
39. C. H. Hsueh and M. C. Lu, Elastic stress transfer from fiber to coating in a fiber-coating system. Mater. Sci. Eng. A - Structures 117 (1989) 115-123.
40. C. H. Hsueh, Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites. 7. Improved analyses for bonded interfaces. Mater. Sci. Eng. A - Structures 154 (1992) 125-132.
41. R. M. Aspden, Fiber stress and strain in fiber reinforced composites. J. Mater. Sci. 29 (1994) 1310-1318.
42. J. Q. Ye and K. P. Soldatos, 3-dimensional stress-analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels. Comput. Meth. Appl. Math. 117 (1994) 331-351.
43. R. E. Montgomery and C. Richard, A model for the hydrostatic pressure response of a 1-3 composite. IEEE Trans. Ultrason. Ferroel. Freq. Control 43 (1996) 457-466.
44. K. L. Goh, K. J. Mathias and R. M. Aspden, Finite element analysis of the effect of fibre shape on stresses in an elastic fibre surrounded by a plastic matrix. J. Mater Sci. 35 (2000) 2493-2497.
45. Z. J. Wu, J. Q. Ye and J. G. Cabrera, 3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method. J. Mech. Phys. Solids 48 (2000) 1037-1063.
46. P. E. Senseny, K. D. Mellegard and J. D. Nieland, Influence of end effects on the deformation of salt. Int. J. Rock Mech. Min. Sci. 26 (1989) 435-444.
47. J. F. Labuz and J. M. Bridell, Reducing frictional constraint in compression testing through lubrication. Int. J. Rock Mech. Min. Sci. 30 (1993) 451-455.
48. A. Odgaard, I. Hvid and F. Linde, Compressive axial strain distributions in cancellous bone specimens. J. Biomech. 22 (1989) 829-835.
49. R. M. Aspden, The effect of boundary-conditions on the results of mechanical tests. J. Biomech. 23 (1990) 623-633.
50. A. Odgaard and F. Linde, The underestimation of Young modulus in compressive testing of cancellous bone specimens. J. Biomech. 24 (1991) 691-698.
51. F. Linde, P. Norgaard and I. Hvid, Mechanical-properties of trabecular bone - dependence on strain rate. J. Biomech. 24 (1991) 803-809.
52. F. Linde. I. Hvid and F. Madsen, The effect of specimen geometry on the mechanical behavior on trabecular bone specimens. J. Biomech. 25 (1992) 359-368.
53. F. Linde, Elastic and viscoelastic properties of trabecular bone by a compression testing approach. Danish Med. Bull. 41 (1994) 119-138.
54. B. T. Brady, An exact solution to the radially end-constrained circular cylinder under triaxial loading. Int. J. Rock Mech. Min. Sci. 8 (1971) 165-178.
55. J. Dougall, An analytical theory of the equilibrium of an isotropic elastic rod of circular section. Trans. R. Soc. Edinburgh 49 (1914) 895-978.
56. A. I. Lur'e, On the theory of thick plates. Prikl. Mat. Mekh. 6 (1942) l51-168 (in Russian). (English review in Math. Rev. 5 (1944) 138.)
57. P. A. Schiff, Sur l'équilibre d'un cylindre élastique. J. Math. Pures Appl. (ser. 3) 9 (1883) 407-421.
58. B. M. Nuller, On the generalized orthogonality relation of P. A. Schiff. Prikl. Math. Mech. 33 (1969) 376-383 (in Russian). English translation: J. Appl. Math. Mech. 33 (1969) 364-372.
59. V. A. Steklov, On the equilibrium of elastic bodies of revolution. Soobshch. Khar'kov Mat. Obshch. (ser. 2) 3 (1892) 173-251 (in Russian).
60. V. K. Prokopov, A review of works on homogeneous solutions in the theory of elasticity and their applications. Trudy Leningr Politekhn. Inst. No 279 (1967) 31-46 (in Russian).
61. I. I. Vorovich, Some mathematical problems in the theory of plates and shells. In: A. S. Vol'mir and G. K. Mikhailov (eds) Trudy II Vsesoyuznogo S'ezda po Teoreticheskoi i Prikladnoi Mekhanike. Moscow: Nauka (1966) Vol. 3 116-136 (in Russian).
62. R. W. Little and S. B. Childs, Elastostatic boundary region problem in solid cylinders. Quart. Appl. Math. 25 (1967) 261-274.
63. W. Flügge and V. S. Kelkar, The problem of the elastic cylinder. Int. J. Solids Struct. 4 (1968) 397-420.
64. G. Horvay and J. A. Mirabel, The end problem of cylinders. Trans. ASME, J. Appl. Mech. 25 (1958) 561-567.
65. A. Mendelson and E. Roberts, Jr., The axisymmetric stress distribution in finite cylinders. In: S. Ostrach and R. H. Scanlon (eds) Proc. 8th Midwestern Mechanics Conference Oxford: Pergamon Press (1963) Vol. 2 Pt. 2 40-57.
66. G. Lamé, Leçons sur la théorie mathématique de l'élasticité des corps solides. Paris: Mallet-Bachelier (1852) 335 pp.
67. G. Lamé, Leçons sur les coordonnées curvilignes et leurs diverses applications. Paris: Mallet-Bachelier (1859) 368 pp.
68. F. Purser, On the application of Bessel's functions to the elastic equilibrium of a homogeneous isotropic cylinder. Trans. R. Irish Acad. A32 (1902) 31-60.
69. G. Pickett, Application of the Fourier method to the solution of certain boundary problems in the theory of elasticity. Trans. ASME, J. Appl. Mech. 11 (1944) 176-182.
70. H. Saito, Axisymmetric strain of a finite circular cylinder and disk. Trans. Japan Soc. Mech. Eng. 18 (1952) 58-63.
71. B. L. Abramyan, On the problem of an axisymmetric deformation of a circular cylinder. Doklady Akad. Nauk Armyan. SSR 19 (1954) No 1 3-12 (in Russian, with Armenian summary).
72. J. P. Benthem and P. Minderhoud, The problem of the solid cylinder compressed between rough rigid stamps. Int. J. Solids Struct. 8 (1972) 1027-1042.
73. M. Knein, Der Spannungszustand bei ebener Formanderung und volkommen verhinderte Querdehnung. Abh. Aerodyn. Inst. Aachen 7 (1927) 43-63.
74. M. L. Williams, Stress singularities from various boundary conditions in angular corners of plates in extension. Trans ASME, J. Appl. Mech. 19 (1952) 526-529.
75. V. I. Mossakovskii, The fundamental mixed problem of the theory of elasticity for a halfspace with a circular line separating the boundary conditions. Prikl. Math. Mech. 18 (1954) 187-196 (in Russian).
76. la. S. Ufliand, The contact problem of the theory of elasticity for a die, circular in its plane, in the presence of adhesion. Prikl. Math. Mech. 20 (1956) 578-587 (in Russian).
77. A. H. England, On stress singularities in linear elasticity. Int. J. Eng. Sci. 9 (1971) 571-585.
78. G. M. L. Gladwell, Contact Problems in the Classical Theory of Elasticity. Alphen aan den Rijn: Sijthoff and Noordhoff (1980) 716 pp.
79. A. D. Kovalenko, Thermoelasticity: Basic Theory and Applications. Groningen: Wolters-Noordhoff (1969) 204 pp.
80. V. T. Grinchenko, Equilibrium and Steady Vibrations of Elastic Bodies of Finite Dimensions. Kiev: Naukova Dumka (1978) 264 pp. (in Russian).
81. V. T. Grinchenko and A. F. Ulitko, Equilibrium of Elastic Bodies of Canonical Forms. Kiev: Naukova Dumka (1985) 280 pp. (in Russian).
82. V. G. Karnaukhov, I. K. Senchenkov and B. P. Gumenyuk, Thermomechanical Behaviour of Viscoelastic Bodies under Harmonic Excitation. Kiev: Naukova Dumka (1985) 288 pp. (in Russian).
83. B. L. Abramyan, Three-Dimensional Problems of the Theory of Elasticity, Erevan: Armenian Academy of Sciences Press (1998) 274 pp. (in Russian).
84. R. von Mises, On Saint-Venant's principle. Bull. Amer Math. Soc. 51 (1945) 555-562.
85. E. Sternberg, On Saint-Venant's principle. Quart. Appl. Math. 11 (1954) 349-402.
86. G. Yu. Dzhanelidze, On Saint-Venant's principle (dedicated to its centinary). Trudy Leningr Politekhn. Inst. No 192 (1958) 7-20 (in Russian).
87. M. E. Gurtin, The linear theory of elasticity. In: S. Flūgge (ed), Handbuch der Physik. Vla/2 Mechanics of Solids Berlin: Springer (1972) 1-295.
88. Y. C. Fung, Foundations of Solid Mechanics. New York: Prentice-Hall (1965) 525 pp.
89. R. O. Davis and A. P. S. Selvadurai, Elasticity and Geomechanics. Cambridge: Cambridge University Press (1996) 201 pp.
90. M. Filonenko-Borodich, Theory of Elasticity. New York: Dover (1965) 284 pp.
91. C. H. Ribière, Sur divers cas de la flexion des prismes rectangles. (Doctorat thèse), Bordeaux (1889) 107 pp.
92. S. Belzeckii, Flexure of a straight beam resting on two supports. Izv. Sobr. Inzh. Putei Soobshch. 25 (1905) 199-202, (in Russian).
93. P. F. Papkovich, Theory of Elasticity. Leningrad-Moscow: Oborongiz (1939) 640 pp. (in Russian).
94. A. Flamant, Sur la répartition des pressions dans un solide rectangulaire chargé transverselement. C. R. Acad. Sci. Paris 114 (1892) 1465-1468.
95. L. M. Keer and K. Chantaramungkorn, Loss of contact between an elastic layer and a halfspace. J. Elasticity 2 (1972) 191-197.
96. A. P. S. Selvadurai, On an invariance principle for unilateral contact at a bimaterial elastic interface. Int. J. Eng. Sci. 41 (2003) 721-739.
97. F. Bleich, Der gerade Stab mit Rechleckquerschnitt als ebenes Problem. Bauingenieur 4 (1923) 255-259, 304-307, 327-331.
98. A. Timpe, Probleme der Spannungsverteilung in ebenen Systemen, einfach gelöst mit Hilfe der AIRYschen Funktion. Z. Math. Phys. 52 (1905) 348-383.
99. T. S. Vashakmadze, The accuracy of the approximation of one problem of elasticity theory. Dokladly Akad. Nauk SSSR 261 (1981) 777-779 (in Russian).
100. T. Honein and G. Herrmann, The involution correspondence in plane elastostatics for regions bounded by a circle. Trans. ASME, J. Appl. Mech. 55 (1988) 566-573.
101. R. D. Gregory, The general form of the 3-dimensional elastic field inside an isotropic plate with free faces. J. Elasticity 28 (1992) 1-28.
102. D. Durban and W. J. Stronge, Diffusion of incremental loads in prestrained bars. Proc. R. Soc. London A439 (1992) 583-600.
103. Y. T. Chiu and K. C. Wu, Analysis for elastic strips under concentrated loads. Trans. ASME, J. Appl. Mech. 65 (1998) 626-634.
104. K. C. Ho and K. T. Chau, A finite strip loaded by a bonded-rivet of a different material. Comput. Struct. 70 (1999) 203-218.
105. S. W. Fowser and T. W. Chou, Numerical integration of Green functions for an edge-loaded infinite strip. Comput. Struct. 35 (1990) 643-647.
106. N. Tahan, M. N. Pavlović and M. D. Kotsovos, Single Fourier series solutions for rectangular plates under inplane forces, with particular reference to the basic problem of colinear compression. 1. Closed-form solution and convergence study. Thin Wall Struct. 15 (1993) 291-303.
107. N. Tahan, M. N. Pavlović and M. D. Kotsovos, Single Fourier series solutions for rectangular plates under inplane forces, with particular reference to the basic problem of colinear compression. 2. Stress distribution. Thin Wall Struct. 17 (1993) 1-26.
108. V. V. Meleshko, Equilibrium of elastic rectangle: Mathieu-Inglis-Pickett solution revisited. J. Elasticity 40 (1995) 207-238.
109. V. V. Meleshko, Bending of an elastic rectangular clamped plate: Exact versus 'engineering' solutions. J. Elasticity 48 (1997) 1-50.
110. V. V. Meleshko, Biharmonic problem in a rectangle. Appl. Sci. Res. 58 (1998) 217-249.
111. R. Pavazza, An approximate solution for thin rectangular orthotropic or isotropic strips under tension by line loads. Int. J. Solids Struct. 37 (2000) 4353-4375.
112. T. Fett, Mixed-mode stress intensity factors for 3-point bending bars. Int. J. Fract. 48 (1991) R67-R74.
113. T. Fett, Stress intensity factors for edge crack subjected to mixed-mode 4-point bending. Theor Appl. Fract. Mech. 15 (1991) 99-104.
114. S. W. Fowser and T. W. Chou, Integral-equations solution for reinforced mode-I cracks opened by internal pressure. Trans. ASME, J. Appl. Mech. 58 (1991) 464-472.
115. S. R. Short, Characterization of interlaminar shear failures of graphite-epoxy composite materials. Composites 26 (1995) 431-449.
116. M. Veidt and H. J. Schindler, On the effect of notch radius and local friction on the mode I and mode II fracture toughness of a high-strength steel. Eng. Fract. Mech. 58 (1997) 223-231.
117. T. Fett, T-stresses in rectangular phases and circular disks. Eng. Fract. Mech. 60 (1998) 631-652.
118. P. F. Arndt and T. Nattermann, Criterion for crack formation in disordered materials. Phys. Rev. B63 (2001) 134204-1-134204-8.
119. R. A. Rodford, M. Braden and R. L. Clarke, Variation of Young modulus with the test specimens aspect ratio. Biomaterials 14 (1993) 781-786.
120. C. T. Chou, S. C. Anderson and D. J. H. Cockayne, Surface relaxation of strained heterostructures revealed by Bragg line splitting in lacbed patterns. Ultramicroscopy 55 (1994) 334-347.
121. T. Fett, G. Gerteisen and S. Hahnenberger, Fracture tests for ceramics under mode-I, mode-II and mixed-mode loading. J. Eur. Ceram, Soc. 15 (1995) 307-312.
122. T. Fett, D. Munz and G. Thun, A toughness test device with opposite roller loading. Eng. Fract. Mech. 68 (2001) 29-38.
123. T. Fett, D. Munz and G. Thun, Test devices for strength measurements of bars under contact loading. J. Test Eval. 29 (2001) 1-10.
124. K. Nishioka, Method of generalized plane-stress for stretching deformation of thin plates with general anisotropy. Z. Angew. Math. Mech. 66 (1986) 503-505.
125. K. Nishioka and Y. Arimitsu, Exact plane-stress solution for some simple cases in anisotropic elasticity. Z. Angew. Math. Mech. 68 (1988) 139-145.
126. N. Tahan, M. N. Pavlović and M. D. Kotsovos, Orthotropic rectangular plates under inplane loading. 2. Application of the series solution by reference to the problem of colinear compression. Compos. Struct. 33 (1995) 49-62.
127. K. C. Wu, Nonsingular boundary integral equations for two-dimensional anisotropic elasticity. Trans. ASME, J. Appl. Mech. 67 (2000) 618-621.
128. R. G. C. Arridge, A. R. Lang and A. P. W. Makepeace, Elastic deformation in a crystal plate where lattice-parameter mismatch is present between adjacent growth sectors. I - Anisotropic elasticity theory, with application to lattice-parameter measurements. Proc. R. Soc. London A458 (2002) 2485-2521.
129. M. Muller, Y. H. Pao and W. Hauger, A dynamic model for a Timoshenko beam in an elastic-plastic state. Arch. Appl. Mech. 63 (1993) 301-312.
130. N. G. Stephen, Mindlin plate theory: Best shear coefficient and higher spectra validity. J. Sound Vibr. 202 (1997) 539-553.
131. G. B. Jeffery, Louis Napoleon George Filon. J. Lond. Math. Soc. 13 (1938) 310-318.
132. L. N. G. Filon, On a quadrature formula for trigonometric integrals. Proc. R. Soc. Edinburgh 49 (1929) 38-47.
133. P. J. Davis and I. Polonsky, Numerical interpolation, differentiation and integration. In: M. Abramowitz and I. A. Stegun (cds) Handbook of Mathemattical Functions with Formulas, Graphs, and Mathematical Tables. New York: Dover (1965) 875-924.
134. L. N. G. Filon, Some points in the teaching of rational mechanics. Math. Gazette 13 (1927) No 183 146-153.
135. L. N. G. Filon, Mass and force in Newtonian mechanics. Math. Gazette 22 (1938) No 2489-16.
136. L. N. G. Filon, An Introduction to the Theory of Elasticity for Engineers and Physicists. By R. V. Southwell, Pp. VIII, 509. 30s. 1936. Oxford Engineering Science Series. (Oxford). Math. Gazette 20 (1936) No 239 217-219.
137. L. N. G. Filon, The investigation of stresses in a rectangular bar by means of polarized light. Phil. Mag. (ser. 6) 23 (1912) 1-25.
138. L. N. G. Filon, On stresses in multiply connected plates. Rep. Brit. Assoc. Adv. Sci. 89 (1921) 305-316.
139. L. N. G. Filon, On the graphical determination of stress from photo-elastic observations. Rep. Brit. Assoc. Adv. Sci. (1923) 350-357. Also: Engineering 116 (1923) 511-512.
140. L. N. G. Filon, The stresses in a circular ring. Selected Engineering Papers London: Institution of Civil Engineering No 12 (1924) 43 pp.
141. L. N. G. Filon, On the expansion of polynomials in series of functions. Proc. London Math. Soc. (ser. 2) 4 (1907) 396-430.
142. J. Dougall, An analytical theory of the equilibrium of an isotropic elastic plate. Trans. R. Soc. Edinburgh 41 (1904) 129-228.
143. E. N. da C. Andrade, The distribution of slide in a rigid six-face subject to pure shear. Proc. R. Soc. London A85 (1911) 448-461.
144. A. M. Gomilko and V. V. Meleshko, Filon's method of series expansion of functions in homogeneous solutions in problem of elasticity. Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela 21 (1986) No 4 48-53 (in Russian). English translation: Mech. Solids 21 (1986) No 4 49-55.
145. P. F. Papkovich, On one form of solution of the plane problem of the theory of elasticity for a rectangular strip. Doklady Akad. Nauk SSSR, 27 (1940) 335-339, (in Russian). German translation: P. F. Papkovitsch, Über eine Form der Lösung des byharmonischen Problems für das Rechteck, C. R. (Doklady) Acad. Sci. URSS, 27 (1940) 334-338. (German reviews in Jbuch Fortschr. Math. 66 (1941) 453: Zentralblatt Math. 23 (1940/41) 127-128. English review in Math. Rev. 2 (1941) 332.)
146. P. F. Papkovich, Two questions of the theory of bending of thin elastic plates. Prikl. Mat. Mekh. 5 (1941) 359-374, (in Russian). (English review in Math. Rev. 4 (1943) 230.)
147. R. C. T. Smith, The bending of a semi-infinite strip. Austr. J. Sci. Res. A5 (1952) 227-237.
148. V. K. Prokopov, On the relation of the generalized orthogonality of P. F. Papkovich for rectangular plates. Prikl. Mat. Mekh. 28 (1964) 351-355 (in Russian). English translation: J. Appl. Math. Mech. 28 (1964) 428-439.
149. V. V. Meleshko, Selected topics in the history of the two-dimensional biharmonic problem. Appl. Mech. Rev. 56 (2003) 33-85.
150. M. D. Kovalenko, Biorthogonal expansions in the first fundamental problem of elasticity theory. Prikl. Mat. Mekh. 55 (1991) 956-963 (in Russian). English translation: J. Appl. Math. Mech. 55 (1991) 836-843.
151. M. D. Kovalenko, On a property of biorthogonal expansions in terms of homogeneous solutions. Doklady Akad. Nauk 352 (1997) 193-195 (in Russian). English translation: Physics - Doklady 42 (1997) 34-36.
152. M. D. Kovalenko, The Lagrange expansions and nontrivial null-representations in terms of homogeneous solutions. Doklady Akad. Nauk 352 (1997) 480-482 (in Russian). English translation: Physics - Doklady 42 (1997) 90-92.
153. M. D. Kovalenko and S. V. Shibrin, A half-strip under the action of concentrated force: an exact solution to the problem. Doklady Akad. Nauk 356 (1997) 763-765 (in Russian). English translation: Physics - Doklady 42 (1997) 570-572.
154. G. G. Sebryakov, M. D. Kovalenko and N. N. Tsybin, Some properties of the set of homogeneous solutions of elasticity. Doklady Akad. Nauk 388 (2003) 193-196 (in Russian). English translation: Physics - Doklady 48 (2003) 42-45.
155. Lord Kelvin and P. G. Tait, A Treatise on Natural Philosophy, Cambridge: Cambridge University Press (1903) Part I, 508 pp., Part II, 527 pp.
156. A. Nádai, Elastische Platten. Berlin: Springer (1925) 326 pp.
157. H. M. Westergaard, Theory of Elasticity and Plasticity, Cambridge MA: Harvard University Press (1952) 176 pp.
158. S. P. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells. New York: McGraw-Hill (1959) 580 pp.
159. L. L. Bucciarelli and N. Dworsky, Sophie Germain: An Essay in the History of the Theory of Elasticity. Dordrecht: Reidel (1980) 147 pp.
160. G. B. Airy, On the strains in the interior of beams. Phil. Trans. R. Soc. London A153 (1863) 49-79.
161. L. E. Goodman, Developments of the three-dimensional theory of elasticity. In: G. Herrmann (ed), R. D. Mindlin and Applied Mechanics. Oxford: Pergamon (1972) 25-64.
162. T. G. Rogers and A. J. M. Spencer, Thermoelastic stress analysis of moderately thick inhomogeneous and laminated plates. Int. J. Solids Struct. 25 (1989) 1467-1482.
163. A. J. M. Spencer, Three-dimensional elasticity solutions for stretching of inhomogeneous and laminated plates. In: G. Eason and R. W. Ogden (eds) Elasticity, Mathematical Methods and Applications. Chichester: Ellis Horwood (1990) pp. 347-356.
164. A. J. M. Spencer and A. P. S. Selvadurai, Some generalized anti-plane strain problems for an inhomogeneous elastic halfspace. J. Eng. Math. 34 (1998) 403-416.
165. A. J. M. Spencer, Concentrated force solutions for an inhomogeneous thick elastic plate. Z. Angew. Math. Phys. 51 (2000) 573-590.
166. Lord Rayleigh. On the flow of viscous fluids especially in two dimensions. Phil. Mag. (ser. 5) 36 (1893) 354-372. Also: Scientific Papers by John William Stratt, Baron Rayleigh. Vol. IV, Cambridge: Cambridge University Press (1903) 78-93.
167. J. N. Goodier, An analogy between slow motions of a viscous fluid in two dimensions and systems of plane stress. Phil. Mag. (ser. 7) 17 (1933) 554-560.
168. R. Hill, On related pairs of plane elastic states. J. Mech. Phys. Solids 4 (1955) 1-9.
169. W. Prager, On conjugate states of plane strain. J. Mech. Phys. Solids 5 (1956) 167-171.
170. J. E. Adkins, Associated problems in two-dimensional elasticity. J. Mech. Phys. Solids 5 (1956) 199-205.
171. T. H. Richards, Analogy between slow motion of a viscous fluid and the extension and flexure of plates: A geometric demonstration by means of moire fringes. Brit. J. Appl. Phys. 11 (1960) 244-254.
172. A. E. Green and W. Zerna, Theoretical Elasticity. Oxford: Clarendon (1968) 457 pp.
173. A. E. Green and J. E. Adkins, Large Elastic Deformations. Oxford: Clarendon (1970) 324 pp.
174. A. P. S. Selvadurai, Plane strain problems in second-order elasticity theory. Int. J. Non-Linear Mech. 8 (1973) 551-563.
175. H. Neuber, Lösung des Carothers - Problems mittels Prinzipien der Kraftübertragung (Keil mit Moment an der Spitze). Z. Angew. Math. Mech. 43 (1963) 211-228.