New design principles for ceramic hot gas components of gas turbines

Ceramic Gas Turbine Design and Test Expericence

Volumn 1, Issue , 2002, Pages 555-582

  Schulz, Achmed ^a  

^a UNIVERSITY OF KARLSRUHE   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

AIR POLLUTION CONTROL; CERAMIC MATERIALS; COMBUSTION CHAMBERS; COMPUTER SIMULATION; FINITE ELEMENT METHOD; FRACTURE MECHANICS; MACHINE COMPONENTS; MACHINE DESIGN; SILICON CARBIDE; STATISTICAL METHODS; STRESS CONCENTRATION;

CERAMIC HOT GAS COMPONENTS; SILICONIZED SILICON CARBIDE; SOFTWARE PACKAGE CERITS-L;

AUTOMOBILE ENGINES;

EID: 0141428956     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Conference Paper

References (35)

1. 4- and SiC-Based Ceramics and their Mutual Interaction," MRS Intl. Meeting on Adv. Materials, Tokyo, Japan, March 5,6, 1988, Materials Research Soc., pp. 237-253, 1989.
2. Grathwohl, G., "Fatigue in Ceramics," in R.J. Brook (Ed.): Concise Encyclopedia of Advanced Ceramic Materials, Pergamon Press, Oxford, pp. 147-152, 1991.
3. Rizk, N., and Mongia, H., "Ultra-Low-Nox Rich-Lean Combustion," ASME paper 90-GT-87, presented at the 35th ASME International Gas Turbine & Aeroengine Congress and Exposition, Brussels, Belgium, June 11-14, 1990.
4. Novick, A., Troth, D., Notardonato, J., "Multifuel Evaporation of a Rich/Quench/Lean Combustor," ASME paper 83-GT-140, presented at the 28th ASME International Gas Turbine & Aero Engine Congress and Exposition, Phoenix, Arizona, USA, March 27-31, 1983.
5. Stürmer, G., Schulz, A., Wittig, S., "Life Time Prediction for Ceramic Gas Turbine Components," ASME paper 91-GT-96, presented at the 36th ASME International Gas Turbine & Aeroengine Congress and Exposition, Orlando, Florida, USA, June 3-6, 1991.
6. Bunk, W., "Overview on the German Program on Ceramic Components for Vehicular Gas Turbines," in Proceedings of the First International Symposium on Ceramic Components for Engines, Hakone, Japan, October 17-19, 1983, pp. 9-20, 1984.
7. Kuck, H., "Experimentelle und theoretische Untersuchung der Vorgänge in einer zylindrischen Modellbrennkammer bei Wandauftragung des Kraftstoffs," (Experimental and theoretical investigation of the processes in a cylindrical model combustor under the influence of fuel on the liner) Dissertation, RWTH Aachen, Germany, 1972 (in German).
8. Smith, K., and Cowell, L., "Experimental Evaluation of a Liquid-Fueled Lean-Premixed Gas Turbine Combustor," ASME paper 89-GT-264, presented at the 34th ASME International Gas Turbine & Aeroengine Congress and Exposition, Toronto, Ontario, Canada, June 4-8, 1989.
9. Pfeiffer, A., Schulz, A., Wittig, S., "Principles of the ITS Ceramic Research Combustor Design: Segmented Flame Tube and Staged Combustion," ASME paper 91-GT-63, presented at the 36th ASME International Gas Turbine & Aeroengine Congress and Exposition, Orlando, FL, USA, June 3-6, 1991.
10. Pfeiffer, A., Schulz, A., Wittig, S., "Design and Development of the ITS Ceramic Research Combustor," In: Proc of the 1991 Yokohama International Gas Turbine Congress, pp. III- 9-15, Gas Turbine Society of Japan.
11. Yovanovich, M., Fisher, N., Saabas, H., "A Light Load Model Combining Surface Roughness and Waviness to Predict Thermal Contact Conductance," AIAA-83-1435, AIAA 18th Thermophysics Conference, 1983.
12. Münz, S., Schulz, A., Wittig, S., "Evaluation of a New Design Concept for a Ceramic Flame Tube Under Engine Conditions," ASME paper 96-GT-222, presented at the 41st ASME International Gas Turbine & Aeroengine Congress, Birmingham, England, UK, June 10-13, 1996.
13. Münz, S., "Entwicklung und maschinentechnische Bewertung neuer konstruktiver Konzepte für ein keramisches Flammrohr," (Development and mechanical engineering evaluation of new design concepts for a ceramic flame tube) Doctoral Thesis, Institute for Thermal Turbomachinery, University of Karlsruhe, Germany, 1995 (in German).
14. Brandauer, M., Schulz, A., Pfeiffer, A., Wittig, S., "Experimental Study of Coke Deposition under Gas Turbine Combustor Conditions," Combust. Sci and Tech., Vol. 89, pp. 265-273, 1993.
15. Brandauer, M., Schulz, A., Wittig, S., "Mechanisms of Coke Formation in Gas Turbine Combustion Chambers," ASME paper 95-GT-49, presented at the International Gas Turbine Aeroengine Congress and Exhibition, Houston, TX, USA, June 5-8, 1995.
16. Brandauer, M., Schulz, A., Wittig, S., "Mechanisms of Coke Formation in Gas Turbine Combustion Chambers," J. of Eng. for Gas Turbines and Power, 118[2], pp. 265-270, 1996.
17. Brandauer, M., "Grundlegende Untersuchungen zur Bildung von Ablagerungenin Brennräumen unter gasturbinentypischen Bedingungen," (Fundamental investigations in the formation of deposits in combustors under typical gas turbine conditions) Doctoral Thesis Institute for Thermal Turbomachinery, University of Karlsruhe, Germany, 1993 (in German).
18. Brandauer, M., Schulz, A., Wittig, S., "Optimization of Fuel Prevaporization on Porous Surfaces for Low-NOx-Combustion," Proc. of the Third Int. Conf. on Combust. Technology for a Clean Environment, Lisbon, Portugal, July 1995.
19. Helmer, T., Peterlik, H., Kromp, K., "Coating of Carbon Fibers - The Strength of the Fibers," J. of the American Ceramic Society, Vol. 78, No. 11, pp. 133-136, 1995.
20. Filsinger, D., Münz, S., Schulz, A., Wittig, S., Andrees, G., "Experimental Assessment of Fiber Reinforced Ceramics for Combustor Walls," ASME paper 97-GT-154, presented at the 42nd ASME International Gas Turbine & Aeroengine Congress and Exposition, Orlando, FL, USA, 2-5 June 1997.
21. Hüther, W., and Krüger, W., "Metal Ceramic Guide Vanes - New Design Concepts," ASME paper 89-GT-334, presented at the 34th ASME International Gas Turbine & Aeroengine Congress and Exposition, Toronto, Ontario, Canada, June 4-8, 1989.
22. Gutmann, C., Schulz, A., Wittig, S., "A New Approach for a Low-Cooled Ceramic Nozzle Vane," ASME paper 96-GT-232, presented at 41st ASME International Gas Turbine & Aeroengine Congress and Exposition, Birmingham, UK, June 10-13, 1996.
23. Nakakado, K., Machida, T., Miyata, H., Hisamatsu, T., Mori, N., Yuri, N., "Strength Design and Reability Evaluation of a Hybrid Ceramic Stator Vane for Industrial Gas Turbines," Transactions of the ASME, J. of Eng. for Gas Turbines and Power, Vol. 117[2], pp. 245-250, 1995.
24. Tsuchiya, T., Furuse, Y., Yoshino, S., Chikami, R., Tsukagoshi, K., Mori, M., "Development of Air-Cooled Ceramic Nozzles for a Power Generating Gas Turbine," ASME paper 95-GT-105, presented at the 40th ASME International Gas Turbine & Aeroengine Congress, Houston, TX, USA, 5-8 June, 1995.
25. Wenglarz, R., Calcuttawala, S., Pope, E., "Ceramic Vane Demonstration in an Industrial Gas Turbine," ASME paper 97-GT-15, presented at the 42nd ASME International Gas Turbine & Aeroengine Congress and Exposition, Orlando, FL, USA, June 2-5, 1997.
26. Day, W., Kouris, K., Holowczak, J., Blair, M., Hale, S., Bornemisza, T., "Development of Cooled, Ceramic First Stage Vanes for the FT (Aeroderivative Gas Turbine," ASME paper 98-GT-133, presented at the 43rd ASME International Gas Turbine & Aeroengine Congress and Exposition, Stockholm, Sweden, June 2-5, 1998.
27. Gutmann, C., "Die keramische Gasturbinenleitschaufel als hochbelastete Schalenstruktur: Neue Konzepte der konstruktiven Gestaltung," (The ceramic gas turbine nozzle as a highly loaded flat structure, new design concepts) Doctoral Thesis, Institute for Thermal Turbomachinery, University of Karlsruhe, Germany, 1994 (in German).
28. Dilzer, M., Gutmann, C., Schulz, A., Wittig, S., "Testing of a Low Cooled Ceramic Nozzle Vane Under Transient Conditions," ASME paper 98-GT-116, presented at the 43rd ASME International Gas Turbine & Aeroengine Congress and Exhibition, Stockholm, Sweden, June 2-5, 1998.
29. Dilzer, M., Schulz, A., Wittig, S., "Systematic Reduction of Stress Levels for a Thermally High Loaded Ceramic Nozzle Vane with Trailing Edge Ejection," ASME paper 99-GT-450, presented at the 44th International Gas Turbine & Aeroengine Congress and Exposition, Indianapolis, IN, USA, June 7-10, 1999.
30. Lundberg, R., Gabrielsson, R., "Progress in the AGATA Project - a European Ceramic Gas Turbine for Hybrid Vehicles," ASME paper 95-GT-446, presented at the 40th ASME International Gas Turbine & Aeroengine Congress, Houston, TX, USA, June 5-8, 1995.
31. Tabakoff, W., Sheoran, Y., Kroll, K., "Flow Measurements in a Turbine Scroll," Transactions of the ASME, J. of Fluids Engineering, Vol. 102, pp. 290-296, 1980.
32. Vu, T., Shyy, W., "Viscous Flow Analysis as a Design Tool for Hydraulic Turbine Components," Transactions of the ASME, J. of Fluids Engineering, Vol. 11, pp. 5-11, 1990.
33. Filsinger, D., Schulz, A., Wittig, S., "Reliability Improvement of Static Ceramic Components for Small Gas Turbines," in Proceedings of the 29th International Symposium on Automotive Technology and Automation, Florence, Italy, pp. 669-676, Automotive Automation Ltd., 1996.
34. Filsinger, D., Schulz, A., Wittig, S., "Reliable Design of Static Components for Small Gas Turbines," International Ceramics, Issue 1, 1996.
35. Filsinger D., "Strukturmechanische Optimierung thermisch hochbelasteter keramischer Gasturbinenkomponenten," (Mechanical design optimization of thermally highly loaded ceramic gas turbine components) in Forschungsberichte aus dem Institut für Thermische Strömungsmaschinen, Band 2/1998, Cuvilier Verlag, Göttingen (in German).