Thermomechanics of slow stable crack growth: Closing the loop between experiments and computational modeling

Engineering Fracture Mechanics

Volumn 70, Issue 17, 2003, Pages 2439-2458

  Bhalla, K S ^a   Zehnder, A T ^a   Han, X ^b  

^a Department of Obstetrics Gynecology   (United States)

^b Wayne State University   (United States)

Author keywords

Crack energy flux; Infrared imaging; Stable crack growth; Thermomechanics

Indexed keywords

CRACKS; FINITE ELEMENT METHOD;

THERMOMECHANICS;

CRACK PROPAGATION;

CRACK;

EID: 0043021914     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0013-7944(03)00006-7     Document Type: Article

References (45)

1. Döll W. An experimental study of the heat generated in the plastic region of a running crack in different polymeric materials Engng. Fract. Mech. 5 1973 259-268
2. Shockey D.A. Kalthoff J.F. Klemm W. Winkler S. Simultaneous measurements of stress intensity and toughness for fast running cracks in steel Exp. Mech. 40 1983 140-152
3. Kobayashi A. Munemura M. Ohtani N. Suemasu H. Estimation of heat evolution during viscoelastic crack propagation by liquid crystal film technique J. Appl. Polym. Sci. 27 1982 3763-3768
4. Fuller K.N.G. Fox P.G. Field J.E. The temperature rise at the tip of fast-moving cracks in glassy polymers Proc. Roy. Soc. Lond. 341 1975 537-557
5. Zehnder A.T. Rosakis A.J. On the temperature distribution in the vicinity of dynamically propagating cracks in 4340 steel J. Mech. Phys. Solids 39 1991 385-415
6. Zehnder A.T. Rosakis A.J. Temperature rise at the tip of dynamically propagating cracks: measurements using high speed infrared detectors Epstein J. Experimental techniques in fracture III 1993 125-170 VCH Publishers
7. Kallivayalil J.A. Zehnder A.T. Measurement of the temperature field induced by dynamic crack growth in Beta-C titanium Int. J. Fract. 66 1994 99-120
8. Bui H.D. Ehrlacher A. Nguyen Q.S. Thermomechanical coupling in fracture mechanics Bui H.D. Nguyen Q.S. Thermomechanical couplings in solids 1987 327-341 Elsevier Science Publishers New York
9. Bui H.D. Ehrlacher A. Nguyen Q.S. Mecanique des solids anelastiques-Etude experimentale de la dissipation dans la propagation de fissure par thermographic infrarouge CR Acad. Sci. Paris 293 1981 1015-1019
10. Toyasada M, Gotoh K, Sagara K. Temperature rise near a crack tip due to plastic work under intermediate loading rate and the study of loading rate dependency on fracture toughness for steels. In: Proceedings of the Second International Offshore and Polar Engineering Conference, 1992. p. 108-15
11. Flores K.M. Dauskardt R.H. Local heating associated with crack tip plasticity in Zr-Ti-Ni-Cu-Be bulk amorphous metals J. Mater. Res. 14 1999 638-650
12. Weichert R. Schönert K. Heat generation at the tip of a moving crack J. Mech. Phys. Solids 26 1978 151-161
13. Weichert R. Schönert K. On the temperature rise at the tip of a fast running crack J. Mech. Phys. Solids 22 1978 127-133
14. Rice J.R. Levy N. Local heating by plastic deformation at a crack tip Argon A.S. Physics of strength and plasticity 1969 277-293 MIT Press Cambridge, MA
15. Dugdale D.S. Yielding of steel sheets containing slits J. Mech. Phys. Solids 8 1960 100-104
16. Kuang Z.-B. Atluri S.N. Temperature field due to a moving heat source: a moving mesh finite element analysis J. Appl. Mech. 52 1985 274-280
17. Douglas A.S. Mair H.U. The temperature field surrounding a dynamically propagating mode III crack Scripta Metall. 21 1987 479-484
18. Gao Y.C. Nemat-Nasser S. Dynamic fields near a crack tip growing in an elastic-perfectly-plastic solid Mech. Mater. 2 1983 47-60
19. Malali PN. Thermal fields generated by dynamic mode III fracture in ductile materials, Masters thesis, The Johns Hopkins University, Baltimore, MD, 1988
20. Li W. Deng X. Rosakis A.J. Determination of temperature field around a rapidly moving crack-tip in an elastic-plastic solid Int. J. Heat Mass Transf. 39 1996 677-690
21. Deng X. Rosakis A.J. Dynamic crack propagation in elastic-perfectly plastic solids under plane stress conditions J. Mech. Phys. Solids 39 1991 683-722
22. Krishnakumar R. Narasimhan R. Prabhakar O. Temperature rise in a visco-plastic material during dynamic crack growth Int. J. Fract. 48 1991 23-40
23. Farren W.S. Taylor G.I. The heat developed during plastic extension of metals Proc. Roy. Soc. A 107 1925 422-451
24. Taylor G.I. Quinney M.A. The latent heat remaining in a metal after cold work Proc. Roy. Soc. A 143 1934 307-326
25. Bever M.B. Holt D.L. Titchener A.L. The stored energy of cold work Prog. Mater. Sci. 17 1973
26. Nabarro F.R.N. Theory of crystal dislocations 1987 Dover Publications New York p. 691-94
27. Zehnder A.T. A model for the heating due to plastic work Mech. Res. Commun. 18 1991 23-28
28. Aravas N. Kim K.S. Leckie F.A. On the calculations of the stored energy of cold work J. Eng. Mater.-Trans. ASME 112 1990 465-475
29. Rosakis P. Rosakis A.J. Ravichandran G. Hodowany J. A thermodynamic internal variable model for the partition of plastic work into heat and stored energy in metals J. Mech. Phys. Solids 48 2000 581-607
30. Zehnder A.T. Babinsky E. Palmer T. Hybrid method for determining the fraction of plastic work converted to heat Exp. Mech. 38 1998 295-302
31. Zehnder A.T. Potdar Y.K. Bhalla K. Plasticity induced heating in the fracture and cutting of metals Aliabadi M.H. Thermomechanical fatigue and fracture 2002 209-244 WIT Press
32. Moran B. Shih C.F. Crack tip and associated domain integrals from momentum and energy balance Engng. Fract. Mech. 27 1987 615-642
33. Moran B. Shih C.F. A general treatment of crack tip contour integrals Int. J. Fract. 35 1987 295-310
34. Shih CF, Moran B, Nakamura T. Crack tip integrals and domain integral representations for three-dimensional crack problems. In: Rosakis AJ, Ravi-Chandar K, Rajapakse Y, editors. Analytical, numerical, and experimental aspects of three-dimensional fracture processes, ASME AMD vol. 91; 1988. p. 125-39
35. Freund L.B. Dynamic fracture mechanics 1990 Cambridge University Press Cambridge, MA
36. Freund L.B. High strain-rate crack growth in rate dependent plastic solids J. Mech. Phys. Solids 33 1985 169-191
37. Nguyen Q.S. A thermodynamic description of the running crack problem Nemat-Nasser S. Three-dimensional constitutive relations and ductile fracture 1981 315-330 North-Holland Publishing Company Amsterdam
38. Rice J.R. A path independent integral and the approximate analysis of strain concentration by notches and cracks J. Appl. Mech. 35 1968 379-386
39. Anderson T.L. Fracture mechanics 1991 CRC Press Boca Raton, FL
40. Zehnder A.T. Viz V.J. Potdar Y.K. Fatigue fracture in plates in tension and out-of-plane shear Fatigue Fract. Engng. Mech. 23 2000 403-415
41. Boyer H. ASM metals handbook 1985 American Society for Metals Cleveland, OH
42. Belfour Stulen Inc., Mechanical Properties Data Center, Aerospace structural metals handbook, Wright-Patterson Air Force Base, OH, Code 1301; 1970. p. 1-40
43. Hibbitt, Karlsson and Sorensen, Inc. ABAQUS User's manual version 5.8, 1996
44. Bawa-Bhalla KS. Thermomechanics of crack growth: closing the loop between experiments and simulation, PhD thesis, Cornell University, Ithaca, NY, 2001
45. Zehnder A.T. Guduru P.R. Rosakis A.J. Ravichandran G. Million frames per second infrared imaging Rev. Sci. Instrum. 71 2000 3762-3768