Feasibility to control launch vehicle internal acoustics using piezoelectric actuators

Journal of Intelligent Material Systems and Structures

Volumn 12, Issue 9, 2001, Pages 647-660

  Niezrecki, Christopher ^a   Cudney, Harley H ^b  

^a UNIVERSITY OF FLORIDA   (United States)

^b State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACOUSTICS; COMPOSITE MATERIALS; EXTRAPOLATION; LEAD COMPOUNDS; MATHEMATICAL MODELS; NATURAL FREQUENCIES; PIEZOELECTRIC MATERIALS; VIBRATIONS (MECHANICAL);

LAUNCH VEHICLE INTERNAL ACOUSTICS; PAYLOAD FAIRINGS; PIEZOELECTRIC ACTUATORS;

ACTUATORS;

EID: 0042848934     PISSN: 1045389X     EISSN: None     Source Type: Journal    
DOI: 10.1177/10453890122145438     Document Type: Article

References (41)

1. Banks, H.T., Lester, H.C. and Smith, R.C. (1992). A piezoelectric actuator model for active vibration and noise control in thin cylindrical shells. In: Proceedings of the 31st Conference on Decision tint! Control. Tucson, Arizona. December, pp. 1797-1802.
2. Bullmore, A.J., Nelson, P.A. and Elliot, S.J. (1986). Active minimisation of acoustic potential energy in harmonically excited cylindrical enclosed sound fields. AJAA Will Aeroacouslics Conference. AIAA-86-1958, Seattle, WA. pp. 1-10, July 9-11.
3. Clark, R.L. and Fuller, C.R. (1991). Experiments on active control of structurally radiated sound using multiple piezoceramic actuators. Journal of the Acoustical Society of America, 91(6): 3313-3320.
4. Denoycr, K.K., Griffin, S.F. and Sciulli, D. (1998). Hybrid structural/acoustic control of a sub-scale payload fairing. In: SPIE Proceedings of the International Society for Optical Engineering. Vol. 3329. March 2-5, pp. 237-243.
5. Fahy, F. (1985). Sound and Structural Vibration: Radiation, Transmission and Response. New York, NY: Academic Press.
6. Falangas, E.T., Dworak, J.A. and Koshigoe, S. (1994). Controlling plate vibrations using piezoelectric actuators. IEEE Control Systems. August, pp. 34-41.
7. Falangas, E.T., Dworak, J.A. and Koshigoe, S. (1993). Methods for controlling plate vibrations using piezoelectric actuators. AIAA-93-3723-CP: 214-223.
8. Glaese, R.M. and Anderson, E.H. (1999). Active structural-acoustic control for composite payload fairings. SPIE Conference on Smart Structures and Materials. Newport Beach, CA. March 1-4.
9. Griffin, S., Hansen, C. and Cazzolato, B. (1999a). Feedback control of structurally radiated sound into enclosed spaces using structural sensing. Journal of the Acoustical Society of America, 106(5): 2621-2628.
10. Griffin, S., Hansen, C. and Cazzolato, B. (1999b). Feasibility of feedback control of transmitted sound into a launch vehicle fairing using structural sensing and proof mass actuators. In: Proceedings of the 40th AIAA/ASME/ASCE/AHS/ASC Structures Structural Dynamics, and Materials Conference & AIAA/ASME/AHS Adaptive Systems Forum. St. Louis, MO, AIAA 99-1529. April 12-15.
11. Houston, B., Marcus, M. and Bucaro, J. (1997). Active blankets for the control of payload fairing interior acoustics. In: Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures Structural Dynamics, and Materials Conference & AlAA/ASME/AHS Adaptive Systems Forum. AIAA 97-1256, Kissimmee, FL. pp. 1-12, April 7-10.
12. Houston, B., Marcus, M., Bucaro, J. and Williams, E. (1996). Active control of payload fairing interior noise using physics-based control laws. 2nd A1AA/CEAS Aeroacoustics Conference. AIAA 96-1723, State College, PA. pp. 1-11, May 6-8.
13. Huybrechts, S. and Meink, T.E. (1997). Advanced grid stiffened structures for the next generation of launch vehicles. In: Proceedings of the 1997 IEEE Aerospace Conference. Vol. 1. pp. 263-269.
14. Koshigoe, S., Gillis, J.T. and Falangas, E.T. (August 1993). A new approach for active control of sound transmission through an elastic plate backed by a rectangular cavity. Journal of the Acoustical Society of America, 94(2): 900-907.
15. Koshigoe, S., Teagle. A. and Gordon, A. (January 1995). A time domain study of active control of sound transmission due to acoustic pulse excitation. Journal of the Acoustical Society of America. 97(1): 313-323.
16. Koshigoe, S., Teagle, A. and Tsay, C. (1995). Analysis ofactive control with on-line system identification on sound transmission through an elastic plate. In: SP/E- Proceedings of the International Society for Optical Engineering, Vol. 2442. pp. 46-57.
17. Lalande, F. (1995). Modeling of induced strain actuation of shell structures. Ph.D. Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, VA.
18. Lalande, F., Chaudhry, Z. and Rogers, C.A. (May 1995) Comparison of different impedance-based models for out-of-phase actuation of
19. actuators bonded on ring structures. Journal of Intelligent Material Systems and Structures, 6: 389-395.
20. Lalande, F., Chaudhry, Z. and Rogers, C.A. (November 1995b). Impedance based modeling of actuators bonded to shell structures. Journal of Intelligent Material Systems anil Structures, 6: 389-395.
21. Lalande, F., Chaudhry, Z. and Rogers, C.A. (1994). Modeling considerations for in-phase actuation of actuators bonded to shell structures. In: Proceedings of the AlAAIASHtE/ASCE/AHS/ASC 35th Structures, Structural Dynamics, and Materials Conference, Adaptive Structures Forum. Hilton Head, SC. pp. 429-437.
22. Lee, Y.A. (1992). Acoustic fill factors for a 120-inch diameter fairing. NASA Contract Report 189284.
23. Lefebvre, S. (1991). Active control of interior noise using actuators in a large-scale composite fuselage. MS. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.
24. Leo, D.J. (September 1999). A feasibility study of piezoelectric actuation for launch vehicle payload fairings. AFOSR Technical Report, Contract F49620-93-C-0063.
25. Leo, D.J. and Anderson, E.H. (1998). Vibroacoustic modeling of a launch vehicle payload fairing for active acoustic control. In: Proceedings of the 39lh AIAA/ASME/ASCE/AHS/ASC Structures Structural Dynamics, and Materials Conference & AIAA/ASME/ AHS Adaptive Systems Forum, pp. 3212-3222.
26. Lester, H.C. and Lefebvre, S. (1991). Piezoelectric actuator models for active sound and vibration control of cylinders. In: Proceedings, Recent Advances in Active Noise and Vibration Control. Blacksburg, VA, Technomic Publishing Company, Inc. pp. 3-26. April 15-17.
27. Liang, C., Sun, P.P. and Rogers, C.A. (1993). An impedance method for dynamic analysis of active material systems. In: Proceedings of the AIAA/ASME/ASCE/AHS/ASC 34th Structures, Structural Dynamics, and Materials Conference. La Jolla, CA. pp. 3587-3599.
28. Newbury, K., Glaese, R., Leo, D. and Anderson, E. (1998). Dynamic characterization of grid stiffened composite panels for active structural-acoustic control. In: Proceedings of the ASME Winter Annual Meeting. 1MECE, Anaheim, CA. November 16-20.
29. Niezrecki, C. (1999). Structural and internal acoustic response of cylinders with applications to rocket payload fairings. Ph.D. Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, VA.
30. Niezrecki, C. and Cudney, H.H. (2000). Internal acoustic response of a simply-supported cylinder with single mode structural vibration. Journal of Sound and Vibration, 229(1): 183-193.
31. Niezrecki, C. and Cudney, H.H. (1999). Creating and verifying a research-grade simply supported cylinder with PZT actuation. Journal of Sound and Vibration, 228(5): 961-975.
32. Niczrecki, C. and Cudney, H.H. (1996). Preliminary review of active control technology applied to the fairing acoustic problem. In: Proceedings of the 37th AlAA/ASME/ASCE/AHS/ASC Structures Structural Dynamics, and Materials Conference & AIAA/ASME/ AHS Adaptive Systems Forum. Salt Lake City, Utah. pp. 101-108. April 18-19.
33. Robinson, M.J., Charette, R.O. and Leonard, B.G. (January 1991). Advanced composite structures for launch vehicles. SAMPE Quarterly, 22(2): 26-37.
34. Rossi, A., Liang, C. and Rogers, C.A. (1993). Impedance modeling of piezoelectric actuator-driven systems: An application to cylindrical ring structures. In: Proceedings of the AlAA/ASME/ASCE/AHS/ ASC 34ill Struct tires, Structural Dynamics, and 'Materials Conference. La Jolla, ÇA. pp. 36I8-3624.
35. Shen, F. and Pope, D. (October 1990). Design and development of composite fairing structures for space launch vehicles. SAE Technical Paper 901836. Aerospace Technology Conference and Exposition. Long Beach, CA.
36. Silcox, R.J. and Lester, H.C. (1989). Propeller modeling effects on interior noise in cylindrical cavities with application to active control. AIAA 12th Aeroacoustics Conference. AIAA-89-1123, San Antonio, TX. pp. 1-12. April 10-12.
37. Snyder, S.D. and Hansen, C.H. (1994). The design of systems to control actively periodic sound transmission into enclosed spaces, part II: Mechanisms and trends. Journal of Sound and Vibration, 170(4): 451-72.
38. Sonti, V.R. and Jones, J.D. (May 1996). Curved piezoelectric model for active vibration control of cylindrical shells. AIAA Journal, 34(5): 1034-1040.
39. Sonti, V.R. and Jones, J.D. (1991). Active vibration control of thin cylindrical shells using piezo- electric actuators. In: Proceedings, Recent Advances in Active Noise and Vibration Control. Blacksburg, VA. Technomic Publishing Company, Inc., pp. 27-38. April 15-17.
40. Zhou, S., Liang, C. and Rogers, C.A. (1994). A dynamic model of a piezoelectric actuator-driven thin plate. In: Proceedings of the SPIE Conference on Smart Structures and Materials. Orlando, FL. Vol. 2190. pp. 550-562.
41. Zhou, S., Liang, C. and Rogers, C.A. (1993). Impedance modeling of two-dimensional piezoelectric actuators bonded on a cylinder. In: Proceedings of the ASME Winter Annual Meeting Adaptive Structures and Material Systems. New Orleans, LA. AD-Vol. 35. pp. 247-255.