Heat and mass transfer simulation by modelling at low Reynolds numbers in a flow with local blowing;Simulation des transferts de masse et de chaleur par modélisation à bas nombres de Reynolds dans un écoulement avec effusion locale en canalisation

Revue Generale de Thermique

Volumn 37, Issue 3, 1998, Pages 205-222

  Campolina Franca, Geraldo Augusto ^a   Pagnier, Philippe ^b   Lallemand, André ^b  

^a Escola de Engenharia   (Brazil)

^b UNIVERSITÉ DE LYON   (France)

Author keywords

Blowing; Boundary layer; Experimental; Heat and mass transfer; LDA; Model at low Reynolds numbers; Non isothermal flow; Simulation; Turbulence; Wall cooling

Indexed keywords

EID: 0042698148     PISSN: 00353159     EISSN: None     Source Type: Journal    
DOI: 10.1016/s0035-3159(97)83650-1     Document Type: Article

References (60)

1. Mickley H.S., Ross R.C., Squyers A.L., Stewart W.E., Heat, mass, and momentum transfer for flow over a flat plate with blowing or suction, NACA, Technical Note 3208, Washington, 1954.
2. Moffat R.J., Kays W.M., The turbulent boundary layer on a porous plate: experimental heat transfer with uniform blowing and suction, Int. J. Heat Mass Tran. 11 (10) (1968) 1547-1566.
3. Moffat R.J., Kays W.M., A review of turbulent boundary layer heat transfer research at Stanford, 1958-1983, Adv. Heat Transfer 16 (1984) 241-345.
4. Whitten D.G., Moffat R.G., Kays W.M., Heat transfer to a turbulent boundary layer with non-uniform blowing and surface temperatures, in: 4th Int. Heat Transfer Conference, Versailles, France, 1970.
5. Mironov B.P., Vasechkin V.N., Mamonov V.M., Yarygina N.I., Heat and mass transfer at high free-stream turbulence as a function of injection rate, Heat Transfer Soviet Research 13 (5) (1981) 54-64.
6. Mironov B.P., Vasechkin V.N., Yarygina N.I., Heat transfer behind the injection section at different levels of free-stream turbulence, Heat and Technology 3 (1) (1985) 1-11.
7. Kutateladze S.S., Leontiev A.I., Heat transfer, mass transfer, and friction in turbulent boundary layers, Hemisphere Publishing Corporation, New York, 1990.
8. Lebedev V.P., Lemanov V.V., Misyura S.Y., Terekhov V.I., Efficiency of a protective gas film with high injection ratios in a highly turbulent main flow, J. Appl. Mech. Tech. Phys. 35 (1) (1994) 49-52.
9. Lebedev V.P., Lemanov V.V., Misyura S.Y., Terekhov V.I., Effects of flow turbulence on the film cooling efficiency, Int. J. Heat Mass Tran. 38 (11) (1995) 2117-2125.
10. Baryshev Y.V., Leont'ev A.I., Peiker N.K., Turbulent boundary layers on a permeable surface with intensive blowing, Institute of High Temperatures, Academy of Sciences of the USSR, Moscow (reprint from Inzhenerno-Fizicheskii Zhurnal 30 (5) (1976) 773-779.
11. Baryshev Y.V., Leont'ev A.I., Peiker N.K., Heat transfer in turbulent boundary layers on a porous plate and in the region of a gas cooling film, Heat Transfer-Soviet Research 10 (5) (1978) 39-46.
12. Dymant L.N., Spanovskii V.M., Calculation of a turbulent boundary layer on a flat plate in the case of intensive injection, Inzhenerno-Fizicheskii Zhurnal 37 (4) (1979) 589-594 (en russe).
13. White F.M., Viscous fluid flow, McGraw-Hill, 2nd ed., Singapore, 1991.
14. Simpson R.L., Characteristics of turbulent boundary layers at low Reynolds numbers with and without transpiration, J. Fluid Mech. 42 (4) (1970) 769-802.
15. Schetz J.A., Nerney B., Turbulent boundary layer with injection and surface roughness, AIAA J. 15 (9) (1977) 1288-1294.
16. Landis R.B., Mills A.F., The calculation of turbulent boundary layers with foreign gas injection, Int. J. Heat Mass Tran. 15 (1972) 1905-1932.
17. Shcherbenko I.V., Calculation for coefficients of heat and mass transfer in injection of a gas into a turbulent boundary layer of a different gas, Heat Transfer-Soviet Research 20 (1) (1988) 31-39.
18. França G.A.C., Li C., Lallemand A., Simulação, por volume finitos, do escoamento turbulento incompressível, nã o-isotérmico, no interior de um duto retangular, com injeção, in : XV CILAMCE, Belo Horizonte, Brasil, 1994, 323-332.
19. Georgiou D.P., Louis J.-F., The transpired turbulent boundary layer in various pressure gradients and the blow-off condition, in : The American Society of Mechanical Engineers Winter Annual Meeting, ASME PAPER 84-WA/HT-711984.
20. Van Driest E.R., On turbulence flow near a wall, J. Aero. Sci. 23 (1956) 1007-1011.
21. Kinney R.B., Skin friction drag of a constant-property turbulent boundary layer with uniform injection, AIAA J. 5 (4) (1967) 624-630.
22. Chan Y.Y., Turbulent boundary layer computations based on an extended mixing length approach, AIAA J. 8 (10) (1970) 1873-1875.
23. Jeromin L.O.F., The status of research in turbulent boundary layers with fluid injection, Progress in Aeronautical Sciences 10 (1970) 65-189.
24. Keller H.B., Cebeci T., Accurate numerical methods for boundary-layer flows. II: Two-dimensionnal turbulent flows, AIAA J. 10 (9) (1972) 1193-1199.
25. Baker R.J., Launder B.E., The turbulent boundary layer with foreign gas injection. I. Measurements in zero pressure gradient, Int. J. Heat Mass Tran. 17 (1974) 275-291.
26. Thomas L.C., Kadry H.M., A one-parameter integral method for turbulent transpired boundary layer flow., J. Fluid Eng.-T. ASME 112 (1990) 433-436.
27. Campolina-Franca G.A., Contribution à l'étude des écoulements pariétaux avec effusion. Application au refroidissement de parois, thèse, Insa de Lyon, 1996.
28. Gosman A.D., Pun W.N., Runchal A.K., D.B. Spalding, Heat and mass transfer in recirculating flows, Academic Press, London, 1969.
29. Spalding D.B., Launder B.E., The numerical computation of turbulent flows, Computer Methods in Applied Mechanics and Engineering 3 (2) (1974) 269-289.
30. Patankar S.V., Numerical heat transfer and fluid flow, Hemisphere, 1st ed., New York, 1980.
31. Jones W.P., Launder B.E., The prediction of laminarization with a two-equation model of turbulence, Int. J. Heat Mass Tran. 15 (1972) 301-314.
32. Lam C.K.G., Bremhorst K., A modified form of the k - ε model for predicting wall turbulence, J. Fluid Eng.-T. ASME 103 (1981) 456-460.
33. Nagano Y., Hishida M., Improved form of the k - ε model for wall turbulent shear flows, J. Fluid Eng.-T. ASME 109 (1987) 156-160.
34. Sabnis J., Madabhushi R., Gibeling H., H. Mcdonald, On the use of k - ε turbulence model for computation of solid rocket internal flows, in : AIAA/ASME/SAE/ASEE 25th Joint Propulsion Conference Monterey (CA), 1989.
35. Rodi W., Mansour N.N., Low Reynolds number k - ε modelling with the aid of direct simulation data, J. Fluid Mech. 250 (1993) 509-529.
36. Cho H.H., Goldstein R.J., An improved low-Reynolds-number k - ε turbulence model for recirculating flows, Int. J. Heat Mass Tran. 3, 10 (1994) 1495-1508.
37. Abe K., Kondoh T., Nagano Y., A new turbulence model for predicting fluid flow and heat transfer in separating and reattaching flows: I. Flow field calculations, Int. J. Heat Mass Tran. 37 (1) (1994) 139-151.
38. Patel V.C., Rodi W., Scheuerer G., Turbulence models for near- wall and low Reynolds number flows: a review, AIAA J. 23 (9) (1984) 1308-1319.
39. Launder B.E., Reece G.J., Rodi W., Progress in the development of a Reynolds-stress turbulence closure, J. Fluid. Mech. 68 (3) (1975) 537-565.
40. Launder B.E., Reynolds W.C., Rodi W., Mathieu J., Jeandel D., Turbulence and their applications, Eyrolles, Paris, 1984.
41. Beddini R.A., Injection-induced flow in porous-walled ducts, AIAA J. 24 (11) (1986) 1767-1773.
42. So R.M.C., Yoo G.J., Low Reynolds number modeling of turbulent flows with and without wall transpiration, AIAA J. 25 (12) (1987) 1556-1564.
43. Demuren A.O., Sarkar S., Perspective: Systematic study of Reynolds stress closure models in the computations of plane channel flows, J. Fluid Engin.-T. ASME 115 (1993) 5-12.
44. Cousteix J., Turbulence et couche limite, Cepadues-Éditions, Toulouse, 1989.
45. Schiestel R., Modélisation et simulation des écoulements turbulents, Hermès, Paris, 1993.
46. Tedeschi G., França G.A.C., Lallemand A., Refroidissement d'une paroi plane par transpiration: comparaison de différents modèles pour le calcul des échanges thermiques, in : Congrès de la Société française des thermiciens, Poitiers, 1995, pp. 206-211.
47. Kays W.M., Heat transfer to the transpired turbulent boundary layer, Int. J. Heat Mass Tran. 15 (1972) 1023-1044.
48. Brouwers H.J.H., Chesters A.K., Film models for transport phenomena with fog formation: the classical film model, Int. J. Heat Mass Tran. 35 (1) (1992) 1-11.
49. França G.A.C., Tedeschi G., Lallemand A., Turbulent incompressible flow within a channel with transpiration: solution of the coupled problem porous wall-main flow, in : Proc. 13th Brasilian Congress and 2nd Iberian American Congress of Mechanical Engineering, 12-15 December, Belo Horizonte, Brasil, 1995.
50. Rodet J.C., Campolina-Franca G.A., Pagnier P., Morel R., Lallemand A., Étude en soufflerie thermique du refroidissement de parois poreuses par effusion de gaz, Rev. Gén. Therm. 37 (2) (1998) 123-136.
51. Mohammadi B., Pironneau O., Analysis of the k - ε turbulence model, Masson, Paris, 1993.
52. Nicoud F., Prévision des transferts convectifs sur les protections thermiques d'un propulseur à propergol solide, Onera, N.T. 1993-15, Toulouse, 1993.
53. Padet J., Fluides en écoulement. Méthodes et modèles, Masson, Paris, 1990.
54. Yap C., Turbulent heat and momentum transfer in recirculating and impinging flows, thesis, Faculty of Technology, University of Manchester, USA, 1987.
55. Spalding D.B., The Phoenics beginner's guide, CHAM, London, 1991.
56. Gosman A.D., Ideraiath F.J.K., Teach-2D: a general computer program for two-dimensional, turbulent, recirculating flows, Dept of Mechanical Engineering, University of California, Report FM-83-2, 1983.
57. Anderson D.A., Tannehill J.C., Plectcher R.H., Computational fluid mechanics and heat transfer, Hemisphere, New York, 1984.
58. Lips B., Andoh H.Y., Lallemand A., Couplage entre un écoulement pariétal et un écoulement effusif à travers une paroi poreuse, Rev. Gén. Therm. 395 (1994) 659-668.
59. Andoh H.Y., Lips B., Lallemand A., Couplage transferts de masse et de chaleur dans une paroi poreuse. Application à la détermination des coefficients d'échange interne, Entropie 182 (1994) 21-33.
60. Holman J.P., Transferencia de calor, Mc Graw Hill do Brazil, Sao Paulo, 1983.