Heat transfer coefficients on the squealer tip and near squealer tip regions of a gas turbine blade

Journal of Heat Transfer

Volumn 125, Issue 4, 2003, Pages 669-677

  Kwak, Jae Su ^a   Han, Je Chin ^a  

^a Texas AandM University   (United States)

Author keywords

Convection; Cooling; Heat transfer; Measurement techniques; Rotating turbines

Indexed keywords

GAS TURBINES; HEAT TRANSFER COEFFICIENTS; LIQUID CRYSTALS; REYNOLDS NUMBER; ROTORS; TURBOMACHINE BLADES;

SUCTION SIDES;

HEAT TRANSFER;

BLADE; GAS TURBINE; HEAT TRANSFER; INDUSTRIAL APPLICATION; MEASUREMENT METHOD; PROCESSING TECHNIQUE;

EID: 0042418700     PISSN: 00221481     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1571849     Document Type: Article

References (29)

1. Han, J. C., Dutta, S., and Ekkad, S. V., 2000, Gas Turbine Heat Transfer and Cooling Technology, Taylor & Francis, New York
2. Metzger, D. E., Bunker, R. S., and Chyu, M. K., 1989, "Cavity Heat Transfer on a Transverse Grooved Wall in a Narrow Flow Channel," ASME J. Heat Transfer, 111, pp. 73-79.
3. Chyu, M. K., Moon, H. K., and Metzger, D. E., 1989, "Heat Transfer in the Tip Region of Grooved Turbine Blades," ASME J. Turbomach., 111, pp. 131-138.
4. Heyes, F. J. G., Hodson, H. P., and Dailey, G. M., 1991, "The Effect of Blade Tip Geometry on the Tip Leakage Flow in Axial Turbine Cascades," ASME Paper No. 91-GT-135.
5. Yang, T. T., and Diller, T. E., 1995, "Heat Transfer and Flow for a Grooved Turbine Blade Tip in a Transonic Cascade." ASME-95-WA/HT-29.
6. Ameri, A. A., Steinthorsson, E., and Rigby, L. David, 1997, "Effect of Squealer Tip on Rotor Heat Transfer and Efficiency," ASME Paper No. 97-GT-128.
7. Dunn, M. G., and Haldeman, C. W., 2000, "Time-Averaged Heat Flux for a Recessed Tip, Lip, and Platform of a Transonic Turbine Blade," ASME J. Turbomach., 122, pp. 692-697.
8. Azad, G. M. S., Han, J. C., Teng, S., and Boyle, R., 2000, "Heat Transfer and Pressure Distributions on a Gas Turbine Blade Tip," ASME J. Turbomach., 122, pp. 717-724.
9. Azad, G. M. S., Han, J. C., and Boyle, R., 2000, "Heat Transfer and Pressure Distributions on the Squealer Tip of a Gas Turbine Blade," ASME J. Turbomach., 122, pp. 725-732.
10. Azad, G. M. S., Han, J. C., Bunker, R. S., and Lee, C. P., 2002, "Effect of Squealer Geometry Arrangement on a Gas Turbine Blade Tip Heat Transfer," ASME J. Heat Transfer, 124, pp. 452-459.
11. Mayle, R. E., and Metzger, D. E., 1982, "Heat Transfer at the Tip of an Unshrouded Turbine Blade," Proc. Seventh Int. Heat Transfer Conf., Hemisphere Pub., pp. 87-92.
12. Metzger, D. E., and Rued, K., 1989, "The Influence of Turbine Clearance Gap Leakage on Passage Velocity and Heat Transfer Near Blade Tips. Part I: Sink Flow Effects on Blade Pressure Side," ASME J. Turbomach., 111, pp. 284-292.
13. Rued, K., and Metzger, D. E., 1989, "The Influence of Turbine Clearance Gap Leakage on Passage Velocity and Heat Transfer Near Blade Tips. Part II: Source Flow Effects on Blade Pressure Side," ASME J. Turbomach., 111, pp. 293-300.
14. Metzger, D. E., Dunn, M. G., and Hah, C., 1991, "Turbine Tip and Shroud Heat Transfer," ASME J. Turbomach., 113, pp. 502-507.
15. Bunker, R. S., Baily, J. C., and Ameri, A. A., 2000, "Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine: Part I: Experimental Results," ASME J. Turbomach., 122, pp. 272-277.
16. Bunker, R. S., and Baily, J. C., 2001, "Effect of Squealer Cavity Depth and Oxidation on Turbine Blade Tip Heat Transfer," ASME Paper No. 2001-GT-0155.
17. Teng, S., Han, J. C., and Azad, G. M. S., 2001, "Derailed Heat Transfer Coefficient Distributions on a Large-Scale Gas Turbine Blade Tip," ASME J. Heat Transfer, 123, pp. 803-809.
18. Ameri, A. A., and Steinthorsson, E., 1995, "Prediction of Unshrouded Rotor Blade Tip Heat Transfer," ASME Paper No. 95-GT-142.
19. Ameri, A. A., and Steinthorsson, E., 1996, "Analysis of Gas Turbine Rotor Blade Tip and Shroud Heat Transfer," ASME Paper No. 96-GT-189.
20. Ameri, A. A., Steinthorsson, E., and Rigby, L. David, 1999, "Effects of Tip Clearance and Casing Recess on Heat Transfer and Stage Efficiency in Axial Turbines," ASME J. Turbomach., 121, pp. 683-693.
21. Ameri, A. A., and Bunker, R. S., 2000, "Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine: Part 2: Simulation Results," ASME J. Turbomach., 122, pp. 272-277.
22. Ameri, A. A., and Rigby, D. L., 1999, "A Numerical Analysis of Heat Transfer and Effectiveness on Film Cooled Turbine Blade Tip Models," NASA/CR 1999-209165.
23. Ameri, A. A., 2001, "Heat Transfer and Flow on the Blade Tip of a Gas Turbine Equipped With a Mean-Camberline Strip," ASME J. Turbomach., 123, pp. 704-708.
24. Rhee, D. H., Choie, J. H., and Cho, H. H., 2001, "Effect of Blade Tip Clearance on Turbine Shroud Heat/Mass Transfer," ASME Paper No. 2001-GT-0158.
25. Jin, P., and Goldstein, R. J., 2002, "Local Mass/Heat Transfer on a Turbine Blade Tip," The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, February 10-14, HT-ABS-012, pp. 1-11.
26. Jin, P., and Goldstein, R. J., 2002, "Local Mass/Heat Transfer on Turbine Blade Near-Tip Surfaces," ASME Paper No. GT-2002-30556.
27. Papa, M., Goldstein, R. J., and Gori, F., 2002, "Effects of Tip Geometry and Tip Clearance on the Mass/Heat Transfer From a Large-Scale Gas Turbine Blade," ASME Paper No. GT-2002-30192.
28. Kwak, J. S., and Han, J. C., 2003, "Heat Transfer Coefficient on a Gas Turbine Blade Tip and Near Tip Regions," presented at the 8th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, St. Louis, June, Paper No. AIAA-2002-3012; Also, AIAA J. Thermophysics and Heat Transfer, 17(3).
29. Kline, S. J., and McClintock, F. A., 1953, "Describing Uncertainties in Single Sample Experiments," Mech. Eng. (Am. Soc. Mech. Eng), 75, pp. 3-8.