Reliable J-values

Materialpruefung/Materials Testing

Volumn 45, Issue 6, 2003, Pages 264-275

  Brocks, W ^a,b,c,d   Scheider, I ^b,e  

^a UNIVERSITY OF KIEL   (Germany)

^b INSTITUTE OF MATERIALS RESEARCH   (Germany)

^c Fed Inst for Materials and Testing   (Germany)

^d FRAUNHOFER INSTITUTE FOR MECHANICS OF MATERIALS IWM   (Germany)

^e TECHNISCHE UNIVERSITÄT BERLIN   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; FINITE ELEMENT METHOD; FRACTURE MECHANICS; PLASTICITY; ABAQUS; ELASTOPLASTICITY;

INCREMENTAL PLASTICITY;

ELASTOPLASTICITY; FINITE ELEMENT METHOD;

ELASTIC PLASTIC FRACTURE MECHANICS; ELASTIC-PLASTIC MATERIAL; FAR FIELD; INCREMENTAL PLASTICITY; J INTEGRAL; J VALUE; NUMERICAL ASPECTS; PATH DEPENDENCE;

EID: 0042234066     PISSN: 00255300     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (40)

1. Cherepanov, C. P.: "Crack propagation In continous media" Appl. Math. Mech. 31 (1967), 476-488
2. Rice, J. R.: "A path independent Integral and the approximate analysis of strain concentrations by notches and cracks", J. Appl. Mech. 35 (1968), 379-386
3. Wilson, W. K. and Osias, J. R.: "A comparison of finite element solutions for an elastic-plastic crack problem", Int. J. Fracture 14 (1978), R95
4. Larsson, L. H.: "A calculational round robin In elastic-plastic fracture mechanics". Int. J. Press. Vess. and Piping 11 (1983), 207
5. Larsson, L. H.: "EGF numerical round robin on EPFM", Proc. 3rd Int. Conf. on Numerical Methods in Fracture Mechanics (eds. A. R. Luxmoore and D. R. J. Owen), Swansea (UK), 1984
6. ESIS TC8: "Recommendations for use of FEM in fracture mechancis", ESIS News-letter 15, 1991, 3-7
7. ASTM E 1737-96: "Standard test method for J-ntegral characterization of fracture toughness", Annual Book of ASTM Standards, Vol. 03.01
8. Noether, E.: "Invariante Variations-Proble me", Nachr. Gesell. Göttingen, Math.-Phys. Klasse 235 (1918)
9. Eshelby, J. D.: "The continuum theory of lattice defects", Prog. Solid States Physics 3 (1965), 79-114
10. Günther, W.: "Über einige Randintegrale der Elastomechanik" Abh. Brauchschw. Wiss. Ges. 14 (1962), 53-72
11. Knowles, J. K. and Sternberg, E.: "On a class of conservation laws in linearized and finite elastostatics", Arch. Rat. Mech. Anal. 44 (1972), 187-211
12. Budiansky, E. and Rice, J. R.: "Conservation laws and energy release rates", J. Appl. Mech. 40 (1973), 201-203
13. Buggisch, Gross and Krüger, "Einige Erhaltungssätze der Kontinuumsmechanik vom J-Integral-Typ", Ing. Archiv 50 (1981), 103-111
14. Kienzler, R.: "Konzepte der Bruchmechanik integrale Bruchkriterien", Grundlagen und Fortschritte der Ingenieurwissenschaften, Vieweg, Braunschweig, 1993
15. Hutchinson, J. W.: "Singular behaviour at the end of a tensile crack in a hardening material" J. Mech. Phys. Solids 16 (1968), 13-31
16. Rice, J. R., and Rosengren, G. F.: "Plane strain deformation near a crack-tip in a power-law hardening material", J. Mech. Phys. Solids 16 (1968), 1-12
17. ABAQUS/Standard Version 6.1, User's Manual Vol. I, 7.8.2, 2000
18. Parks, D. M.: "The virtual crack extension method for nonlinear material behavior", Computer Methods In Applied Mechanics and Engineering 12 (1977), 353-364
19. Parks, D. M.: "Virtual crack extension A general finite element technique for J-integral evaluation", Proc. 1st Int. Conf Numerical Methods in Fracture Mechanics, Swansea (UK), 1978, 464-478
20. de Lorenzi, H. G.: "On the energy release rate and the J-integral for 3D crack configurations", J. Fracture 19 (1982), 183-193
21. Kordisch, H.: "Untersuchungen zum Verhalten von Rissen unter überlagerter Normal- und Scherbeanspruchung", Dissertation, Karlsruhe, 1982
22. Kikuchi, M., Miyamoto, H., and Sakaguchi, Y.: "Evaluation of three-dimensional J-integral of semi-elliptical surface crack in pressure vessel", Trans.5th Int. Conf. Structural Mechanics in Reactor Technology (5th SMiRT), paper G7/2, Berlin, 1979
23. Amestoy, M., Bui, H. D., and Labbens, R.: "On the definition of local path independent Integrals in 3D crack problems", Mech. Res. Communications (1981)
24. Bakker, A.: "The three-dimensional J-Integral", Delft University of Technology (The Netherlands), Report WTHD 167, 1984
25. de Lorenzi, H. G.: "Energy release rate calculations by the finite element method", General Electric Technical Infomation Series, Report No. 82CRD205, 1982
26. Siegele, D.: "3D crack propagation using ADINA", Computers & Structures 32 (1989), 639-645
27. Muscati, A. and Lee, D. J.: "Elastic-plastic finite element analysis of thermally loaded cracked structures", Int. J. Fracture 25 (1984), 2276-246
28. k integrals for a crack in multiphase materials", Recent Research on Mechanical Behavior of Materials, Bulletin of Fracture Mechanics Laboratory, Vol. 1, Science University of Tokyo, 1982
29. Atluri, S. N., Nishioka, T. and Nakagaki, M.: "Incremental path-independent integrals in inelastic and dynamic fracture mechanics", Engineering Fracture Mechanics 20 (1984), 209-244
30. Brust, F. W., Nishioka, T. and Atluri, S. N.: "Further studies on elastic-plastic stable fracture utilizing the T*-Integral". Engineering Fracture Mechanics 22 (1985), 1079-1103
31. Yuan, H. and Brocks, W.: "Numerical investigations on the significance of J for large stable crack growth", Engineering Fracture Mechanics 32 (1989), 459-468
32. Yuan, H.: "Untersuchung bruchmechanischer Parameter für elastisch-plastisches Rißwachstum", Fortschr.-Ber. VDI Reihe 18 Nr, 82, Düsseldorf: VDI-Verlag, 1990
33. Yuan, H. and Brocks, W.: On the J-integral concept for elastic-plastic crack extension, Nuclear Engineering and Design 131 (1991), 157-173
34. Rice, J.R.: "An examination of the fracture mechanics energy balance from the point of view of continuum mechanics", Proc. 1st Int. Conf. on Fracture (eds. T. Yokobori, T. Kawasaki and J. K. Swedlow), Sendai (Japan), 1965, 309-340
35. Rice, J.R.: "The mechanics of quasi-static crack growth", Proc. 8th Int. Congress of Applied Mechanics (ed. R.E. Kelly), 1979, 191-216
36. Barsoum, R.S.: "Triangular quarterpoint elements as elastic and perfectly-plastic crack tip elements", Int. J. Num. Meth. Engng. 11 (1977), 85-98
37. Brocks, W.: "Zur numerischen Ermittlung des Spannungsintensitätsfaktors in der linear elastischen Bruchmechanik", Strukturmechanik und numerische Verfahren (Hrsg. R. Diekkämper, H.-J. Niemann), Köln-Braunsfeld: R. Müller (1982), 88-101
38. Brocks, W. and Olschewski, J.: "On J-dominance of crack-tip fields in largely yielded 3D structures", Int. J. Solids Structures 22 (1986), 693-708
39. Brocks, W., Müller, W. and Olschewski, J.: "Experiences in applying ADINA to the analysis of crack tip fields in elastic-plastic fracture mechanics", Nonlinear Finite Element Analysis and ADINA, Computers and Structures 21 (1985), No. 1/2, 137-158
40. ESIS P2-92: "ESIS recommendations for determining the fracture resistance of ductile materials", European Structural Integrity Society (1992)