Measurement of fracture parameters in three-dimensional cracked-body problems

International Applied Mechanics

Volumn 39, Issue 5, 2003, Pages 503-524

  Smith, C W ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

Experimental laboratory method; Fracture parameters; Large structures; Stress freezing; Stress intensity factor

Indexed keywords

ADHESIVES; ALGORITHMS; CRACKS; ELASTIC MODULI; EPOXY RESINS; LOADS (FORCES); PHOTOELASTICITY; PROBLEM SOLVING; SHEAR STRESS; STRESS INTENSITY FACTORS; STRUCTURAL ANALYSIS; TENSILE STRESS; THERMAL EFFECTS; VISCOELASTICITY;

FRACTURE PARAMETERS; STRESS FREEZING;

FRACTURE MECHANICS;

EID: 0042023480     PISSN: 10637095     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1025131424074     Document Type: Review

References (64)

1. G. Oppel, "Polarisationsoptische Untersuchung räumlicher Spannungs und Dehnungszustände," Forsch. Geb. Ingenieurw., 7, 240-248, (1936).
2. M. Hetenyi, "The fundamentals of three dimensional photoelasticity," J. Appl. Mech., 5, No. 4, A149-A155 (1938).
3. M. M. Frocht, Photoelasticity. Vols 1 and 2, John Wiley & Sons, New York (1941).
4. A. Kuske and G. Robertson, Photoelastic Stress Analysis, John Wiley & Sons, New York (1974).
5. J. Cemosek, "Three dimensional photoelasticity by stress freezing," J. Exp. Mech., 20, 417-426 (1980).
6. G. R. Irwin, Discussion of Ref. [7] (1958), pp. 94-96.
7. A. A. Wells and D. Post, "The dynamic stress distribution surrounding a running crack - a photoelastic analysis," in: Proc. of Soc. for Exp. Stress Anal., X1(1), 69-92 (1958).
8. M. K. Kassir and G. C. Sih, "Three dimensional stress distribution around an elliptical crack under arbitrary loadings," J. Appl. Mech., 33, No. 3, 601-611 (1966).
9. C. W. Smith and O. Olaosebikan, "Use of mixed mode stress intensity factors from photoelastic data," J. Exp. Mech., 24, No. 4, 300-307 (1984).
10. M. H. L. Tardy, "Method Pratique D'examen de Mesure de la Birefringence des Verres D'optique," Optics Rev., 8, 59-69 (1929).
11. D. Post, "Fringe multiplication in three dimensional photoelasticity," J. Strain Anal., 1, No. 5, 380-388, (1966).
12. M. A. Schroedl, J. J. McGowan, and C. W. Smith, "An assessment of factors influencing data obtained by the photoelastic stress freezing technique for stress fields near crack tips," J. Engr. Frac. Mech., 4, 801-809 (1972).
13. D. G. Smith and C. W. Smith, "A photoelastic evaluation of the influence of closure and other effects upon the local bending stresses in cracked plates," Int. J. Fract. Mech., 6, 305-318 (1970).
14. D. G. Smith and C. W. Smith, "Influence of precatastrophic extension and other effects on local stresses in cracked plates under bending fields," J. Exp. Mech., 11, No. 9, 394-401 (1971).
15. G. R. Marrs and C. W. Smith, "A study of local stresses near surface flaws in bending fields," in: Stress Analysis and Growth of Cracks, ASTM STP 513 (1972), pp. 22-36.
16. M. A. Schroedl and C. W. Smith, "Local stresses near deep surface flaws under cylindrical bending fields," in: Progress in Flaw Growth and Fracture Toughness Testing, ASTM STP 536 (1973), pp. 45-63.
17. B. R. Mullinix and C. W. Smith, "Distribution of local stresses across the thickness of cracked plates under bending fields," Int. J. Fract., 10, No. 3, 337-352 (1974).
18. C. W. Smith, "Use of three-dimensional photoelasticity in fracture mechanics," J. Exp. Mech., 13, No. 12, 539-544 (1973).
19. M. A. Schroedl, J. J. McGowan, and C. W. Smith, "Determination of stress intensity factors from photoelastic data with applications to surface-flaw problems," J. Exp. Mech., 14, No. 10, 392-399 (1974).
20. M. Jolles, M. A. Schroedl, and C. W. Smith, "Experimental determination of side boundary effects on stress intensity factors in surface flaws," J. Eng. Mat. Tech., 97, 45-51 (1975).
21. M. A. Schroedl and C. W. Smith, "A study of near and far field effects in photoelastic stress intensity determination," J. Eng. Fract. Mech., 7, 341-355 (1975).
22. A. E. Harms and C. W. Smith, "Stress intensity factors for long, deep surface flaws in plates under extensional fields," VPI-E-73-6, Feb. 1973, Recent Advances in Eng. Sci., 7, 59-66 (1976).
23. C. W. Smith, W. H. Peters, and A. T. Andonian, "Mixed mode stress intensity distributions for part circular surface flaws," J. Eng. Fract. Mech., 13, 615-629 (1979).
24. L. E. Hulbert (ed.), Workshop on Three Dimensional Fracture Analysis, Battelle-Columbus Labs, Columbus, OH (1976).
25. J. J. McGowan (ed.), "A critical evaluation of numerical solutions to the benchmark surface flaw problem," Proc. Soc. Exp. Stress Analysis, 37, No. 2, 253-264 (1980).
26. C. W. Smith, W. H. Peters, G. C. Kirby, and A. Andonian, "Stress intensity distributions for natural flaw shapes approximating benchmark geometries," in: Fracture Mechanics, ASTM-STP 742 (1981), pp. 422-437.
27. C. W. Smith and G. C. Kirby, "Stress intensity distributions for natural cracks approaching benchmark crack depths in remote uniform tension," in: Fracture Mechanics, ASTM-STP 791, Theory and Analysis (1983), pp. 269-280.
28. C. W. Smith and G. C. Kirby, "Stress intensity distributions and width correction factors for natural cracks approaching "benchmark" crack depths," in: Fracture Mechanics, 15, ASTM STP 833 (1984), pp. 118-129.
29. C. W. Smith, W. H. Peters, and G. C. Kirby, "Crack tip measurements in photoelastic models," J. Exp. Mech., 22, No. 12, 448-453 (1982).
30. C. W. Smith, D. Post, and G. Nicoletto, "Experimental stress-intensity distributions in three-dimensional cracked body problems, " J. Exp. Mech., 23, No. 4, 378-382 (1983).
31. C. W. Smith, J. S. Epstein, and M. Rezvani, "Measurement of dominant eigenvalues in cracked body problems," Int J. Fract., 39, No. 1, 15-24, E. S. Folias, (ed.), Structural Integrity-Theory and Experiment, Kluwer Academic Publ., New York (1989).
32. J. P. Benthem, "Three dimensional state of stress at the vertex of a quarter infinite crack in a halfspace," Delft Report H75 (1975).
33. C. W. Smith, M. Rezvani and W. R. Lloyd, "Experimental near tip methods of analysis in fracture mechanics," in: Proc. Conf. on Experimental Mechanics (1986), pp. 418-424.
34. C. W. Smith and J. S. Epstein, "Some three dimensional aspects of sub-critical flaw growth," in: Fracture Mechanics, ASTM-STP 868 (1985), pp. 504-520.
35. C. W. Smith, "Analytical and experimental studies of the surface flaw," J. Exp. Mech., 28, No. 2, 194-200 (1988).
36. E. Sommer, "Fracture mechanics evaluation of surface cracks," Werkstofforschung und Technik, Springer Verlag (1984).
37. J. C. Newman Jr., and I. S. Raju, Prediction of Fatigue Crack Growth Patterns and Lives in Three Dimensional Cracked Bodies, NASA TM-85787 (1984).
38. M. Jolles, J. J. McGowan, and C. W. Smith, "Stress intensities for cracks emanating from holes in finite thickness plates," Recent Advances in Eng., 12, 353-362 (1975).
39. J. J. McGowan and C. W. Smith, "SIF for deep cracks emanating from the corner formed by a hole intersecting a plate surface," in: Mechanics of Crack Growth, ASTM STP 590 (1976), pp. 460-476.
40. C. W. Smith., M. Jolles, and W. H. Peters, "Stress intensities for cracks emanating from pin-loaded holes," in: Flaw Growth and Fracture, ASTM STP, Vol. 631 (1977), pp. 190-201.
41. C. W. Smith, W. H. Peters, and S. F. Gou, "Influence of flaw geometries on hole-crack stress intensities," in: Fracture Mechanics, ASTM STP, Vol. 677 (1979), pp. 431-445.
42. C. W. Smith, W. H. Peters and M. Jolles, "Stress intensities for nozzle cracks in reactor vessels," J. Exp. Mech., 17, No. 12, 449-454, (1977).
43. R. W. Derby, "Shape factors for nozzle corner cracks," J. Exp. Mech., 12, No. 12, 580-584 (1972).
44. M. J. G. Broekhoven, "Compulation of stress intensity factors for nozzle corner cracks by various finite element procedures," Report MMPP119, Delft Univ. Tech Lab for Thermal Power and Nuclear Eng., Paper G-416, 3rd SMIRT Conf., London (1975).
45. C. W. Smith, M. I. Jolles, and W. H. Peters, "Geometric influences upon stress intensity distributions along reactor vessel nozzle cracks," in: Proc. 4th Int. Conf. on Structural Mechanics in Reactor Technology, Vol. G, G4/3 (1977), pp. 1-8.
46. C. W. Smith, W. H. Peters, W. T. Hardrath, and T. S. Fleischman, "Stress intensity distribution in nozzle corner cracks of complex geometry," in: SMIRT Proc., VPI-E-79-2, Vol. 6, No. 5, Paper G4/4 (1979).
47. C. W. Smith and S. J. Wiersma, "Stress fringe signatures for propagating cracks," J. Eng. Fract. Mech., 23, No. 1, 229-236 (1986).
48. C. W. Smith, "The frozen stress method applied to linear elastic fracture mechanics: historical development," in: H. P. Rossmanith (ed.), Fracture Research in Retrospect, A. A. Balkema, Rotterdam/Brookfield (1997), pp. 247-264.
49. C. W. Smith, "Crack tip stress fields under complex loads: application to pressure vessel problems," Int. J. Press. Vess. Piping, 12, 43-60 (1983).
50. C. W. Smith, W. R. Lloyd, and M. Rezvani, "Experimental near tip methods of analysis in fracture mechanics," in: Proc. SEM Spring Conf. on Experimental Mechanics (1986), pp. 418-424.
51. C. W. Smith, "Fracture parameter measurements for cracks emanating from curved surfaces by the frozen stress method," in: Proc. 9th Int. Conf. on Experimental Mechanics, Vol. 5 (1990), pp. 1776-1785.
52. C. W. Smith and A. L. Wang, "Stress intensity distributions around surface flaws in motor grain geometries," in: Proc. Int. Conf. on Fracture of Engineered Materials and Structures, Elsevier Appl. Sci. Pub. (1991), pp. 69-74.
53. C. W. Smith and A. L. Wang, "Stress intensity factor distribution and crack shapes in 3D problems using frozen stress," in: Advances in Local Fracture/Damage Models for the Analysis of Engineering Problems, ASME-AMD, Vol. 137 (1992), pp. 109-120.
54. C. W. Smith, L. Wang, and C. T. Liu, "Stress intensity distributions and crack growth concepts for a basic motor grain shape with application to a scaled model geometry," in: ASME PVP V-295, NE, Vol. 26 (1994), pp. 1-14.
55. B. Cotterell, "On brittle fracture paths," Int. J. Fract. Mech., 1, 96-103 (1965).
56. B. Cotterell. "Notes on the paths and stability of cracks," Int. J. Fract. Mech., Vol. 2, 526-533 (1966).
57. C. W. Smith, D. M. Constantinescu, and C. T. Liu, "Stress intensities and crack growth in photoelastic motor grain models," in: Proc. SEM Annual Conf. on Exp. Appl. Mech. (Disk) (2002).
58. J. W. Hutchinson and H. Suo, "Mixed mode cracking in layered materials," in: Advances in Applied Mechanics, Vol. 29, Academic Press, New York (1992), pp. 63-91.
59. C. W. Smith, E. F. Finlayson, and C. T. Liu, "A method for evaluating stress intensity distribution for cracks in rocket motor bondlines," J. Eng. Fract. Mech., Vol. 58, No. 1/2, 97-105 (1997).
60. C. W. Smith, E. F. Finlayson, and C. T. Liu, "A study of residual stress and property mismatch on SIF distribution for cracks parallel to and within bondlines," in: ASME-PVP, Vol. 381 (1998), pp. 1-7.
61. C. W. Smith, E. F. Finlayson, and C. T. Liu, "Influence of material properties of SIFs determined by frozen stress," J. Eng. Fract. Mech., 61, 555-568 (1998).
62. Carl B. Ostervig, "Stress intensity factor determination from isochromatic fringe patterns," J. Eng. Fract. Mech., 26, No. 6, 937-944 (1987).
63. A. S. Kobayashi (ed.), Handbook on Experimental Mechanics, 2nd Revised Edition, Chapter 20, C. W. Smith and A. S. Kobayashi, VCH Publishers, New York (1993).
64. Y. Murakami (ed.), Stress Intensity Factors Handbook, Vol. 2, Ch. 9, Pergamon Press (1986).