The development of EUROFER reduced activation steel

Fusion Engineering and Design

Volumn 69, Issue 1-4 SPEC, 2003, Pages 197-203

  Van der Schaaf, B ^a   Tavassoli, F ^b   Fazio, C ^c   Rigal, E ^d   Diegele, E ^e   Lindau, R ^e   LeMarois, G ^f  

^a NUCLEAR RESEARCH AND CONSULTANCY GROUP NRG   (Netherlands)

^b CEA SACLAY   (France)

^c ENEA   (Italy)

^d CEA GRENOBLE   (France)

^e KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

^f EFDA CLOSE SUPPORT UNIT   (Germany)

Author keywords

EUROFER; PbLi17; Reduced activation steel

Indexed keywords

MARTENSITE; OXIDATION; POWER PLANTS; STEEL;

FUSION POWER PLANTS;

FUSION REACTORS;

EID: 0041782612     PISSN: 09203796     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0920-3796(03)00337-5     Document Type: Article

References (30)

1. Ehrlich K. Materials research towards a fusion reactor. Fus. Eng. Des. 56-57:2001;71-82.
2. V. Shamardin, in Proceedings of the IEA Working Group Meeting on RAFM Steels, JAERI, Tokyo, 3&4 November, 1997.
3. van der Schaaf B., et al. Progress and critical issues of reduced activation ferritic/martensitic steel development. J. Nucl. Mater. 283-287:2000;52-59.
4. K. Seidel et al., Experimental investigation of radioactivity induced in the fusion power plant structural materials EUROFER and in other steels by D-T reactions, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
5. A. Paul et al., Study on the solubility of U at very low concentration on RAFM steel, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
6. L. Bedel et al., Mechanical properties of diffusion bonded welds (RAFM/RAFM HIP joints), Fusion Technology CEA annual report 2001, Ass. CEA/EURATOM, Saint-Paul-lez-Durance, 2002, pp. 247-249.
7. J.M. Gentzbittel et al., Mechanical properties of powder HIP steel, Fusion Technology CEA annual report 2001, Ass. CEA/EURATOM, Saint-Paul-lez-Durance, 2002, pp. 251-252.
8. A. Fontes, EUROFER weldability, Fusion Technology CEA annual report 2001, Ass. CEA/EURATOM, Saint-Paul-lez-Durance, 2002, pp. 268-273.
9. Spaetig et al., On the mechanical properties of the advanced tempered martensitic steel EUROFER97, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
10. M. Schirra et al., Ergebnisse von Charakterisierungsuntersuchungen zu physikalischen und mechanischen Eigenschaften des martensitischen 9% Cr-Stahles EUROFER97, Forschungszentrum Karlsruhe, FZKA 6707, April, 2002.
11. J.W. Rensman, Reduced activation ferritic-martensitic steels, NRG Fusion Technology Tasks Progress report 2001, NRG, Petten, 2002, pp. 43-59.
12. H. Riesch-Oppermann, E. Diegele, Towards a micro-mechnical description of the fracture behavior for RAFM steels in the ductile-to-brittle transition regime, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
13. Assessment of the integrity of structures containing defects, R/H/R6 Rev 4, British Energy Generation Ltd, 2001.
14. A.F. Armas, C. Petersen et al., Mechanical and microstructural behavior of isothermally and thermally fatigued ferritic-martensitic stainless steels, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
15. A. Danon et al., Behavior of the low activation martensitic alloy EUROFER97 (FeCrWVTa) upon heating and continuous cooling, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
16. P. Fernandez et al., Metallurgical properties of the reduced activation martensitic steel EUROFER97 on as-received condition and after thermal ageing, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
17. A. Alamo et al., Characterization, physical metallurgy and thermal ageing behavior of EUROFER97, Fusion Technology CEA annual report 2001, Ass. CEA/EURATOM, Saint-Paul-lez-Durance, 2002, pp. 239-246.
18. C. Petersen, V. Shamardin et al., Irradiation in a temperature controlled test rig of BOR60, Nuclear Fusion Programme Annual report October 2000 - September 2001, Association Forschungszentrum Karlsruhe/EURATOM, Karlsruhe, 2002, pp. 117.
19. J.W. Rensman et al., Characteristics of unirradiated and 60 °C 2.5 dpa irradiated EUROFER97, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
20. D. Preininger, Mechanisms of the effect of helium on tensile ductility and impact behaviour of ferritic-martensitic 7-12 Cr steels, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
21. R.L. Klueh et al., Pros and cons of nickel and boron-doping to study helium effects in ferritic/martensitic steels, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
22. O. Raquet et al., Corrosion in water conditions, Fusion Technology CEA annual report 2001, Ass. CEA/EURATOM, Saint-Paul-lez-Durance, 2002, pp. 253-256.
23. M.-F. Maday, Mechanisms governing fracture of cyclically loaded F82H steel in air and water at 240 °C, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
24. G. Benamati, C. Fazio et al., Mechanical and corrosion behavior of EUROFER97 steels exposed to PbLi17, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
25. H. Glasbrenner et al., Corrosion Behaviour of Al based TPB in flowing Pb-17Li, ICFRM-10, Baden-Baden, 2001, to appear.
26. A. Aiello et al., Hydrogen permeability and embrittlement in EUROFER 97 martensitic steel, ENEA C.R. Brasimone report - LB-A-R-009, Jannuary, 2001.
27. Jung, C. Liu, Desorption of hydrogen from pre-irradiated and helium-implanted low activation martensitic stainless steel, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
28. C. Cayron et al., ODS process and qualification, Fusion Technology CEA annual report 2001, Ass. CEA/EURATOM, Saint-Paul-lez-Durance, 2002, pp. 283-286.
29. R. Lindau et al., Mechanical and microstructural properties of a HIPped RAFM ODS steel, Proc. ICFRM-10, Baden-Baden, 2001, to appear.
30. A. Alamo et al., ODS RAFM microstructure and mechanical properties, Fusion Technology CEA annual report 2001, Ass. CEA/EURATOM, Saint-Paul-lez-Durance, 2002, pp. 287-290.