Mechanical property characterization of resin cement after aqueous aging with and without cyclic loading

Dental Materials

Volumn 19, Issue 7, 2003, Pages 645-652

  Walker, Mary P ^a   Spencer, Paulette ^a   David Eick, J ^a  

^a UNIVERSITY OF MISSOURI KANSAS CITY   (United States)

Author keywords

Flexural properties; Fracture analysis; Resin cement; Simulated clinical conditions

Indexed keywords

BENDING STRENGTH; CEMENTS; CYCLIC LOADS; DEGRADATION; FRACTURE; MORPHOLOGY; RESINS; SCANNING ELECTRON MICROSCOPY;

SIMULATED CLINICAL FUNCTIONS;

DENTAL AMALGAMS;

EID: 0041627688     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0109-5641(03)00008-3     Document Type: Article

References (59)

1. Anusavice K.J. Phillips' science of dental materials. 10th ed:1996;WB Saunders Company, Philadelphia.
2. White S.N., Yu Z. Compressive and diametral tensile strengths of current adhesive luting agents. J Prosthet Dent. 69:1993;568-572.
3. Yoshida K., Tanagawa M., Atsuta M. In vitro solubility of three types of resin and conventional luting cements. J Oral Rehabil. 25:1998;285-291.
4. Creugers N.H., De Kanter R.J., Verzijden C.W., Van't Hof M.A. Risk factors and multiple failures in posterior resin-bonded bridges in a 5-year multi-practice clinical trial. J Dent. 26:1998;397-402.
5. Creugers N.H., Snoek P.A., Van't Hof M.A., Kayser A.F. Clinical performance of resin-bonded bridges: a 5-year prospective study. Part III. Failure characteristics and survival after rebonding. J Oral Rehabil. 17:1990;179-186.
6. Meiers J.C., Jensen M.E., Mayclin T. Effect of surface treatments on the bond strength of etched-metal resin-bonded retainers. J Prosthet Dent. 53:1985;185-190.
7. Zidan O., Asmussen E., Jorgensen K.D. Microscopical analysis of fractured restorative resin/etched enamel bonds. Scand J Dent Res. 90:1982;286-291.
8. Wood M., Kern M., Thompson V.P., Romberg E. Ten-year clinical and microscopic evaluation of resin-bonded restorations. Quintessence Int. 27:1996;803-807.
9. Ratner B.D., Schoen F.J., Lemons J.E. Biomaterials science. 1996;Academic Press, San Diego.
10. Söderholm K.J., Zigan M., Ragan M., Fischlschweiger W., Bergman M. Hydrolytic degradation of dental composites. J Dent Res. 63:1984;1248-1254.
11. Yamashita J., Shiozawa I., Takakuda K., Miyairi H. Deformation of restoration and fracture of luting cement film. J Dent. 26:1998;459-466.
12. Roulin-Moloney A.C. Fractography and failure mechanisms of polymers and copolymers. 1989;Elsevier, London.
13. Montes G.G., Draughn R.A. Slow crack propagation in composite restorative materials. J Biomed Mater Res. 21:1987;629-642.
14. Aquilino S.A., Diaz-Arnold A.M., Piotrowski T.J. Tensile fatigue limits of prosthodontic adhesives. J Dent Res. 70:1991;208-210.
15. Givan D.A., Fitchie J.G., Anderson L., Zardiackas L.D. Tensile fatigue of 4-META cement bonding three base metal alloys to enamel and comparison to other resin cements. J Prosthet Dent. 73:1995;377-385.
16. Fitchie J.G., Zardiackas L.D., Givan D.A., Anderson L., Caughman W.F. Tensile fatigue of two composite cements bonding three base metal alloys to bovine enamel. Dent Mater. 9:1993;28-32.
17. Knobloch L.A., Kerby R.E., Seghi R., Berlin J.S., Lee J.S. Fracture toughness of resin-based luting cements. J Prosthet Dent. 83:2000;204-209.
18. Li Z.C., White S.N. Mechanical properties of dental luting cements. J Prosthet Dent. 81:1999;597-609.
19. Black J. Biological performance of materials. 3rd ed:1999;Marcel Dekker, New York.
20. Gopferich A. Mechanisms of polymer degradation and erosion. Biomaterials. 17:1996;103-114.
21. Donovan T.E. Contemporary evaluation of dental cements. Compend Contin Educ Dent. 20:1999;197-217.
22. Kuraray Co., Ltd. Panavia Technical Information. Report No. Osaka, Japan; 1999.
23. Ferracane J.L., Berge H.X., Condon J.R. In vitro aging of dental composites in water - effect of degree of conversion, filler volume, and filler/matrix coupling. J Biomed Mater Res. 42:1998;465-472.
24. Imazato S., McCabe J.F., Tarumi H., Ehara A., Ebisu S. Degree of conversion of composites measured by DTA and FTIR. Dent Mater. 17:2001;178-183.
25. Sakaguchi R.L., Berge H.X. Reduced light energy density decreases post-gel contraction while maintaining degree of conversion in composites. J Dent. 26:1998;695-700.
26. Bates J.F., Stafford G.D., Harrison A. Masticatory function - a review of the literature (II) Speed of movement of the mandible, rate of chewing and forces developed in chewing. J Oral Rehabil. 2:1975;349-361.
27. Neill D.J., Kydd W.L., Nairn R.I., Wilson J. Functional loading of the dentition during mastication. J Prosthet Dent. 62:1989;218-228.
28. Pruim G.J., DeJongh H.J., Ten Bosch J.J. Forces acting on the mandible during bilateral static bite at different bite force levels. Biomechanics. 13:1980;755-763.
29. Tillitson E.W., Craig R.G., Peyton F.A. Experimental stress analysis of fixed partial dentures by use of a dynamic method. J Dent Res. 50:1971;422-429.
30. Ziada H.M., Benington I.C., Orr J.F. Photoelastic stress analysis in resin bonded bridge design. Eur J Prosthodont Restor Dent. 3:1995;217-222.
31. Hammant B. The use of 4-point loading tests to determine mechanical properties. Composites. 2:1971;246-249.
32. Goldstein J.I., Newbury D.E., Echlin P. Scanning electron microscopy and X-ray microanalysis. 2nd ed:1992;Plenum Press, New York.
33. Cohen J. Statistical power analysis for the behavioral sciences. 2nd ed:1988;Lawrence Erlbaum, Hillsdale, NJ.
34. Nakamura K., Hatakeyama T., Hatakeyama H. Relationship between hydrogen bonding and bound water in polyhydroxystyrene derivatives. Polymer. 24:1983;871-876.
35. Darvell B.W. Materials science for dentistry. 5th ed:1998;BW Darvell, Hong Kong.
36. Söderholm K.J., Roberts M.J. Influence of water exposure on the tensile strength of composites. J Dent Res. 69:1990;1812-1816.
37. Tohgo K., Fukuhara D., Hadano A., Ishii H. Influence of debonding damage on mechanical performance of glass particle reinforced nylon 66 composites. 1998;Fatigue, Environmental Factors, and New Materials American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Fairfield, NJ. p. 331-8.
38. Latour R.A. Jr, Black J. Development of FRP composite structural biomaterials: fatigue strength of the fiber/matrix interfacial bond in simulated in vivo environments. J Biomed Mater Res. 27:1993;1281-1291.
39. Smith L.V., Weitsman Y.J. Immersed fatigue response of polymer composites. Int J Fract. 82:1996;31-42.
40. McCool J.I., Boberick K.G., Baran G.R. Lifetime predictions for resin-based composites using cyclic and dynamic fatigue. J Biomed Mater Res. 58:2001;247-253.
41. Smutz W.P., Daniels A.U., Andriano K.P., France E.P., Heller J. Mechanical test methodology for environmental exposure testing of biodegradable polymers. J Appl Biomater. 2:1991;13-22.
42. Hargreaves A.S. The effects of cyclic stress on dental polymethylmethacrylate. II. Flexural fatigue. J Oral Rehabil. 10:1983;137-151.
43. Sperling L.H. Introduction to physical polymer science. 3rd ed:2001;Wiley, New York.
44. Krug H., Karbach A., Petermann J. Plastic deformation and subsequent crystallinization of thin films of isotactic/atactic polystyrene (iPS/aPS) blends. Polymer. 25:1984;1687-1689.
45. Manzur A., McIntyre D. Strain-induced crystallization in cis- and trans-polyisoprene blends. J Macromol Sci, Phys. 1988;79-98.
46. Siesler H.W. Rheo-optical Fourier-transform infrared spectroscopy of polymers. 14. Segmental orientation and strain-induced crystallization of a poly(ether urethaneurea) elastomer. Int J Phys Chem (Berichte der Bunsen Gesellschaft fur Physikalische Chemie). 92:1988;641-645.
47. Elyashevich G.K., Karpov E.A., Lavrentiev V.K., Poddubny V.I., Genina M.A., Zabashta Y.F. Changes in the amorphous phase of polyethylene upon high extension. Int J Polym Mater. 22:1993;191-199.
48. Termonia Y., Smith P. Kinetic model for tensile deformation of polymers. 2. Effects of entanglement spacing. Macromolecules. 21:1988;2184-2189.
49. Negahban M., Wineman A.S., Ma R.-J. Simulation of mechanical response in polymer crystallization. Int J Engng Sci. 31:1993;93-113.
50. Ma R., Negahban M. Simulation of mechanical response during polymer crystallization around rigid inclusions and voids: homogeneous crystallization. Mech Mater. 21:1995;25-50.
51. Williams J.G., Pavan A. Fracture of polymers, composites, and adhesives. 2000;Elsevier, New York.
52. Brandrup J., Immergut E.H., Grulke E.A. Polymer handbook. 4th ed:1999;Wiley, New York.
53. Young R.J., Beaumont P.W.R. Failure of brittle polymers by slow crack growth. II. Failure processes in silica particle-filled epoxy resin composite. J Mater Sci. 10:1975;1343-1350.
54. Gumbsch P. On the response of dynamic cracks to increasing overload. Symposium Q: Fracture - Instability Dynamics, Scaling, and Ductile/Brittle Behavior Materials Research Society Symposium Proceedings. 1996;Materials Research Society, Pittsburgh, PA.
55. Frankenberger R., Kramer N., Petschelt A. Fatigue behaviour of different dentin adhesives. Clin Oral Invest. 3:1999;11-17.
56. Braem M.J., Davidson C.L., Lambrechts P., Vanherle G. In vitro flexural fatigue limits of dental composites. J Biomed Mater Res. 28:1994;1397-1402.
57. Kinloch A.J., Young R.J. Fracture behaviour of polymers. 1983;Applied Science Publishers, London.
58. Söderholm K.J. Filler systems and resin interface. Vanherle G., Smith D.C. Posterior composite resin dental restorative materials. 1985;139-184 3M Company, St Paul.
59. Michalske T.A., Freiman S.W. A molecular interpretation of stress corrosion in silica. Nature. 295:1982;511-512.