Process integration technology review: Background and applications in the chemical process industry

Journal of Chemical Technology and Biotechnology

Volumn 78, Issue 9, 2003, Pages 1011-1021

  Dunn, Russell F ^a   El Halwagi, Mahmoud M ^b  

^a McSwain Engineering Inc   (United States)

^b Texas AandM University   (United States)

Author keywords

Energy conservation; Pinch technology; Process integration; Wastewater minimization

Indexed keywords

ENERGY CONSERVATION; ENERGY MANAGEMENT; ENERGY RESOURCES; ENERGY UTILIZATION; PRODUCTIVITY; WATER CONSERVATION;

HEAT EXCHANGE NETWORKS (HEN);

CHEMICAL INDUSTRY;

DESIGN; PROCESS CONTROL; PROCESS INDUSTRY; TECHNOLOGICAL DEVELOPMENT;

CHEMICAL INDUSTRY; COST; ENERGY CONSERVATION; ENERGY RESOURCE; HEAT EXCHANGE; MOLECULAR DYNAMICS; POLLUTION CONTROL; PROCESS TECHNOLOGY; REVIEW; WASTE WATER;

EID: 0041322823     PISSN: 02682575     EISSN: None     Source Type: Journal    
DOI: 10.1002/jctb.738     Document Type: Review

References (70)

1. El-Halwagi MM, Pollution Prevention Through Process Integration: Systematic Design Tools, Academic Press, San Diego (1997).
2. El-Halwagi MM and Spriggs HD, Solve design puzzles with mass integration. Chem Eng Prog 94:25-44 (1998).
3. Linnhoff B, Pinch analysis - A state of the art overview. Trans I Chem E Chem Eng Res Des 71, Part A5:503-522 (1993).
4. Shenoy UV, Heat Exchange Network Synthesis: Process Optimization by Energy and Resource Analysis, Gulf Publishing Co, Houston (1995).
5. Douglas JM, Conceptual Design of Chemical Processes, McGraw Hill, New York. pp 216-288 (1988).
6. Gundersen T and Naess L, The synthesis of cost optimal heat exchanger networks: An industrial review of the state of the art. Comp Chem Eng 12(6):503-530 (1988).
7. Wang YP and Smith R, Wastewater minimization. Chem Eng Sci 49:981-1006 (1994).
8. Bagajewicz M, A review of recent design procedures for water networks in refineries and process plants. Comp Chem Eng 24:2093-2113 (2000).
9. Hallale N, A new graphical targeting method for wastewater minimization, American Institute of Chemical Engineers 2000 Annual Meeting, Los Angeles, Paper 47d (2000).
10. Dunn RF and Dobson AM, Water conservation and reuse at a major CPI facility, in National Association of Corrosion Engineering Annual Conference Proceedings, paper 317, pp 1-18 (1999).
11. Dunn RF and Wenzel H, Process integration design methods for water conservation and wastewater reduction in industry, Part 1: Design for single contaminants. Clean Products and Processes 3:307-318 (2001).
12. Crabtree EW, Dunn RF and El-Halwagi MM, Synthesis of hybrid gas permeation membrane condensation systems for pollution prevention. Journal of the Air and Waste Management Association 48:616-626 (1998).
13. Parthasarathy G, Dunn RF and El-Halwagi MM, Development of heat-integrated evaporation and crystallization networks for ternary wastewater systems. 2. Interception task identification for the separation and allocation network. Ind Eng Chem Res 40:2842-2856 (2001).
14. Dhole VR, Ramchandi N, Tainsh RA and Wasilewski M, Make your process water pay for itself. Chem Eng 103(1):100-103 (1996).
15. Keckler SE and Allen DT, Material reuse modeling: A case study of water reuse in an industrial park. J Ind Ecology 2:79-92 (1999).
16. Dunn RF, Wenzel H and Overcash M, Process integration design methods for water conservation and wastewater reduction in industry, Part 2: Design for multiple contaminants. Clean Products and Processes 3:319-329 (2001).
17. El-Halwagi MM and Manousiouthakis V, Synthesis of mass-exchange networks. AIChE J 35:1233-1244 (1989a).
18. El-Halwagi MM and Manousiouthakis V, Automatic synthesis of mass-exchange networks with single component targets. Chem Eng Sci 45:2813-2831 (1990a).
19. El-Halwagi MM and Manousiouthakis V, Design and analysis of multicomponent mass-exchange networks, AIChE Annual Meeting, San Francisco (1989b).
20. Gupta A and Manousiouthakis V, Waste reduction through multicomponent mass exchange network synthesis. Comp Chem Eng 18:S585 (1994).
21. El-Halwagi MM and Manousiouthakis V, Simultaneous synthesis of mass-exchange and regeneration networks. AIChE J 36:1209-1219 (1990b).
22. Garrison GW, Cooley BL and El-Halwagi MM, Synthesis of mass-exchange networks with multiple target mass separating agents. Dev Chem Eng Min Proc 3:31-49 (1995).
23. El-Halwagi MM and Srinivas BK, Synthesis of reactive mass-exchange networks. Chem Eng Sci 47:2113-2119 (1992).
24. Dunn RF and El-Halwagi MM, Optimal recycle/reuse policies for minimizing wastes of pulp and paper plants. J Environ Sci Health A28:217-234 (1993).
25. Srinivas BK and El-Halwagi MM, Synthesis of reactive mass-exchange networks with general nonlinear equilibrium functions. AIChE J 40:463-472 (1994a).
26. Warren A, Srinivas BK and El-Halwagi MM, Optimal design of waste reductions systems for coal-liquefaction plants. J Env Eng 121:742-746 (1995).
27. Srinivas BK and El-Halwagi MM, Synthesis of combined heat and reactive mass-exchange networks. Chem Eng Sci 45:2059-2074 (1994b).
28. Papalexandari KP and Pistikopoulos EN, A multiperiod MINLP model for the synthesis of heat and mass exchange networks. Comp Chem Eng 18:1125-1139 (1994).
29. Papalexandari KP, Floudas C and Pistikopoulos EN, Mass exchange networks for waste minimization: A simultaneous approach. Trans I Chem E 72:279-294 (1994).
30. Dunn RF and El-Halwagi MM, Design of cost-effective VOC recovery systems, by TVA Dept of Econ Devp and EPA Center for Waste Reduction. http://www.owr.ehnr.state.nc.us/ref/00034.html (1996).
31. Zhu M and El-Halwagi MM, Synthesis of flexible mass exchange networks. Chem Eng Comm 183:193-211 (1995).
32. Kiperstok A and Sharrat PN, On the optimization of mass-exchange networks for fixed removal of pollutants. Trans I Chem E 73B:271-277 (1995).
33. Huang YL and Edgar TF, Knowledge based design approach for the simultaneous minimization of waste generation and energy consumption in a petroleum refinery, in Waste Minimization Through Process Design, Ed by Rossiter AP, McGraw-Hill, New York. pp 81-196 (1995).
34. Huang YL and Edgar TF, Intelligent process design and control for in-plant waste-minimization, in Waste Minimization Through Process Design, Ed by Rossiter AP, McGraw-Hill, New York. pp 165-180 (1995).
35. Dunn RF and El-Halwagi MM, Selection of optimal VOC-condensation systems. Waste Mgt 14:103-113 (1994a).
36. Dunn RF and El-Halwagi MM, Optimal design of multi-component VOC-condensation systems. J Haz Mtls 38:187-206 (1994b).
37. Dye SR, Berry DA and Ng KM, Synthesis of crystallization-based separation schemes. AIChE Symp Ser 91:238-241 (1995).
38. Parthasarathy G, Dunn RF and El-Halwagi MM, Development of heat-integrated evaporation and crystallization networks for ternary wastewater systems. 1. Design of the separation system. Ind Eng Chem Res 40(13):2827-2841 (2001).
39. Dunn RF, Zhu M, Srinivas BK and El-Halwagi MM, Optimal design of energy-induced separation systems for VOC recovery. AIChE Symp Ser 90:74-85 (1995).
40. Naser SF and Fournier RL, A system for the design of an optimum liquid-liquid extractant molecule. Comp Chem Eng 15:397-414 (1991).
41. Richburg A and El-Halwagi MM, A graphical approach to the optimal design of heat-induced separation networks for VOC recovery. AIChE Symp Ser 91:256-259 (1995).
42. El-Halwagi MM, Srinivas BK and Dunn RF, Synthesis of heat-induced separation networks. Chem Eng Sci 50:81-97 (1995).
43. Crabtree EW and El-Halwagi MM, Synthesis of environmentally acceptable reactions. AIChE Symp Ser 90:117-127 (1995).
44. Crabtree EW, Dunn RF and El-Halwagi MM, Design and analysis of membrane-hybrid systems for solvent recovery, AIChE Annual Meeting, Miami (1995).
45. Dobson AM, Shortcut design methodologies for identifying cost-effective heat-induced and energy induced separation networks for condensation-hybrid processes, Masters Thesis, Auburn University (1998).
46. Dunn RF and Dobson AM, A spreadsheet based approach to identify cost-effective heat-induced and energy-induced separation networks for condensation-hybrid processes. Advances in Environmental Research 2:269-290 (1998).
47. Shelley MD, El-Halwagi MM, Component-less design of recovery and allocation systems: A functionality-based clustering approach. Comp Chem Eng 24:2081-2091 (2000).
48. El-Halwagi MM Synthesis of optimal reverse-osmosis networks for waste reduction. AIChE J 38:1185-1198 (1992).
49. Srinivas BK and El-Halwagi MM, Optimal design of pervaporation systems for waste reduction. Comp Chem Eng 17:957-970 (1993).
50. Mavrovouniotis ML and Stephanopoulos G, Synthesis of reaction mechanisms consisting of reversible and irreversible steps. Ind Eng Chem Res 31:1625-1637 (1992).
51. Constantinou L, Jacksland C, Bagherpour K, Gani R and Bogle L, Application of group contribution approach to tackle environmentally-related problems. AIChE Symp Ser 90:105-116 (1994).
52. Joback KG, Solvent substitution for pollution prevention. AIChE Symp Ser 90:98-104 (1994).
53. Dunn RF, Dobson AM and El-Halwagi MM, Optimal design of environmentally-acceptable solvent blends for coatings. Advances in Environmental Research 1:115-134 (1997).
54. Hamad AA and El-Halwagi MM, Simultaneous synthesis of mass separating agents and interception networks. Trans I Chem E 76:376-388 (1998).
55. Linnhoff B, Use pinch analysis to knock down capital costs and emissions, Chem Eng Prog, pp 32-57 (1994).
56. Linnohoff B, in Waste Minimization Through Process Design, Ed by Rossiter AP, McGraw-Hill New York, pp 53-56 (1995).
57. Dhole VR, Total site integration for reducing process emissions, in Waste Minimization Through Process Design, Ed by Rossiter AP, McGraw-Hill, New York (1995).
58. El-Halwagi MM, Hamad AA and Garrison GW, Synthesis of waste interception and allocation networks. AIChE J 42:3087-3101 (1996).
59. Dunn RF and Srinivas BK, Synthesis of heat-induced waste minimization networks (HIWAMINs). Advances in Environmental Research 1:275-301 (1997).
60. Dunn RF, Hamad AA and Dobson AM, Synthesis of energy-induced waste minimization networks (EIWAMINs) for simultaneous waste reduction and heat integration. Clean Products and Processes 1(2):91-106 (1999).
61. Chase V, Green chemistry: The middle way to a cleaner environment. R & D Magazine August:25-26 (1995).
62. Anastas PT and Williamson TC (eds), Green Chemistry: Designing Chemistry for the Environment, ACS Symp Ser, vol 626, ACS Pub, Washington, DC (1996).
63. Anastas PT and Farris CA (eds), Benign by Design: Alternative Synthetic Design for Pollution Prevention, ACS Symp Ser, vol 577, ACS Pub, Washington, DC (1994).
64. Odele O and Macchietto S, Computer aided molecular design: A novel method for optimal solvent selection. Fluid Phase Equilibria 82:47-54 (1993).
65. Joback KG and Stephanopoulos G, Designing molecules possessing desired physical property values, in Foundations of Computer Aided Process Design 'FOCAPD' III Ed by Siirola JJ, Grossman I and Stephanopoulos G, CACHE/Elsevier, New York. pp 363-387 (1990).
66. Brignole EA, Bottini S and Gani R, A strategy for the design and selection of solvents for separation processes. Fluid Phase Equilibria 29: 125-132 (1986).
67. Cabezas H and Zhao R, Designing environmentally benign solvents: Physical property considerations, AIChE Spring Meeting, New Orleans, March (1998).
68. Vaidyanathan R and El-Halwagi MM, Computer-aided synthesis of polymers and blends with target properties. Ind Eng Chem Res 35:627-634 (1994).
69. Venkatasubramanian V, Chan K adn Chauthers JM, Computer-aided molecular design using genetic algorithms. Comp Chem Eng 18:833-844 (1994).
70. Achenie LEK and Duvedi AP, Designing environmentally safe refrigerants using mathematical programming. Chem Eng Sci 51(15):3727-3739 (1996).