Cumulative axial and torsional fatigue: An investigation of load-type sequencing effects

ASTM Special Technical Publication

Volumn , Issue 1387, 2000, Pages 281-301

  Kalluri, Sreeramesh ^a   Bonacuse, Peter J ^a  

^a NASA GLENN RESEARCH CENTER   (United States)

Author keywords

Axial fatigue; Cumulative fatigue; Cyclic hardening; Damage curve approach; Life prediction; Linear damage rule; Load type sequencing; Torsional fatigue

Indexed keywords

EID: 0040784609     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1520/stp13510s     Document Type: Article

References (39)

1. Palmgren, A., "Die Lebensdauer von Kugellagern," Zeitschrift des Vereinesdeutscher Ingenierure, Vol. 68, No. 14, April 1924, (The Service Life of Ball Bearings, NASA Technical Translation of German Text, NASA TT 1-13460, 1971), pp. 339-341.
2. Langer, B. F., "Fatigue Failure from Stress Cycles of Varying Amplitude," Journal of Applied Mechanics, Vol. 4, No. 3, September 1937, (Transactions of the American Society of Mechanical Engineers, Vol. 59, 1937), pp. A160-A162.
3. Langer, B. F., "Fatigue Failure from Stress Cycles of Varying Amplitude," Journal of Applied Mechanics, Vol. 4, No. 3, September 1937, (Transactions of the American Society of Mechanical Engineers, Vol. 59, 1937), pp. A160-A162.
4. Miner, M. A., "Cumulative Damage in Fatigue," Journal of Applied Mechanics, Vol. 12, No. 3, September 1945, (Transactions of the American Society of Mechanical Engineers, Vol. 67, 1945), pp. A159-A164.
5. Miner, M. A., "Cumulative Damage in Fatigue," Journal of Applied Mechanics, Vol. 12, No. 3, September 1945, (Transactions of the American Society of Mechanical Engineers, Vol. 67, 1945), pp. A159-A164.
6. Wood, W. A. and Reimann, W. H., "Observations on Fatigue Damage Produced by Combinations of Amplitudes in Copper and Brass," Journal of the Institute of Metals, Vol. 94, 1966, pp. 66-70.
7. Manson, S. S., Nachtigall, A. J., Ensign, C. R., and Freche, J. C., "Further Investigation of a Relation for Cumulative Fatigue Damage in Bending," Journal of Engineering for Industry, 1965, pp. 25-35.
8. Manson, S. S., Freche, J. C., and Ensign, C. R. "Application of a Double Linear Damage Rule to Cumulative Fatigue," Fatigue Crack Propagation, ASTM STP 415, American Society for Testing and Materials, 1967, pp. 384-412.
9. Manson, S. S. and Halford, G. R., "Practical Implementation of the Double Linear Damage Rule and Damage Curve Approach for Treating Cumulative Fatigue Damage," International Journal of Fracture, Vol. 17, No. 2, 1981, pp. 169-192.
10. Bui-Quoc, T., "Cumulative Damage with Interaction Effect Due to Fatigue Under Torsion Loading," Experimental Mechanics, 1982, pp. 180-187.
11. Miller, K. J. and Ibrahim, M. F. E., "Damage Accumulation During Initiation and Short Crack Growth Regimes," Fatigue of Engineering Materials and Structures, Vol. 4, No. 3, 1981, pp. 263-277.
12. Manson, S. S. and Halford, G. R., "Re-examination of Cumulative Fatigue Damage Analysis - An Engineering Perspective," Engineering Fracture Mechanics, Vol. 25, Nos. 5/6, 1986, pp. 539-571.
13. Golos, K. and Ellyin, F., "Generalization of Cumulative Damage Criterion to Multilevel Cyclic Loading," Theoretical and Applied Fracture Mechanics, Vol. 7, 1987, pp. 169-176.
14. Chaboche, J. L. and Lesne, P. M., "A Non-Linear Continuous Fatigue Damage Model," Fatigue and Fracture of Engineering Materials and Structures, Vol. 11, No. 1, 1988, pp. 1-17.
15. McGaw, M. A., Kalluri, S., Moore, D., and Heine, J., "The Cumulative Fatigue Damage Behavior of MarM 247 in Air and High Pressure Hydrogen," Advances in Fatigue Lifetime Predictive Techniques: Second Volume, ASTM STP 1211, M. R. Mitchell and R. W. Landgraf, Eds., American Society for Testing and Materials, 1993, pp. 117-131.
16. Miller, K. J. and Brown, M. W., "Multiaxial Fatigue: A Brief Review," Fracture 84, Proceedings of the 6th International Conference on Fracture, 1984, New Delhi, India, Pergamon Press, pp. 31-56.
17. Hua, C. T. and Socie, D. F., "Fatigue Damage in 1045 Steel Under Variable Amplitude Biaxial Loading," Fatigue and Fracture of Engineering Materials and Structures, Vol. 8, No. 2, 1985, pp. 101-114.
18. Miller, K. J., "Metal Fatigue - Past, Current, and Future," Proceedings of the Institution of Mechanical Engineers, Vol. 205, 1991, pp. 1-14.
19. Robillard, M. and Cailletaud, G. "'Directionally Defined Damage' in Multiaxial Low-Cycle Fatigue: Experimental Evidence and Tentative Modelling," Fatigue Under Biaxial and Multiaxial Loading, ESIS10, K. Kussmaul, D. McDiarmid, and D. Socie, Eds. 1991, Mechanical Engineering Publications, London, pp. 103-130.
20. Harada, S. and Endo, T. "On the Validity of Miner's Rule under Sequential Loading of Rotating Bending and Cyclic Torsion," Fatigue Under Biaxial and Multiaxial Loading, ESIS10, K. Kussmaul, D. McDiarmid, and D. Socie, Eds., 1991, Mechanical Engineering Publications, London, pp. 161-178.
21. Weiss, J. and Pineau, A., "Continuous and Sequential Multiaxial Low-Cycle Fatigue Damage in 316 Stainless Steel," Advances in Multiaxial Fatigue, ASTM STP 1191, D. L. McDowell and R. Ellis, Eds., American Society for Testing and Materials, 1993, pp. 183-203.
22. Weiss, J. and Pineau, A., "Fatigue and Creep-Fatigue Damage of Austenitic Stainless Steels under Multiaxial Loading," Metallurgical Transactions A, Vol. 24A, 1993, pp. 2247-2261.
23. Lin, H., Nayeb-Hashemi, H., and Berg, C. A., "Cumulative Damage Behavior of Anisotropic A1-6061-T6 as a Function of Axial-Torsional Loading Mode Sequence," Journal of Engineering Materials and Technology, Vol. 116, 1994, pp. 27-34.
24. Hua, G. and Fernando, U. S., "Effect of Non-Proportional Overloading on Fatigue Life," Fatigue and Fracture of Engineering Materials and Structures, Vol. 19, No. 10, 1996, pp. 1197-1206.
25. Kalluri, S. and Bonacuse, P. J., "In-Phase and Out-of-Phase Axial-Torsional Fatigue Behavior of Haynes 188 Superalloy at 760°C," Advances in Multiaxial Fatigue, ASTMSTP 1191, D. L. McDowell and J. R. Ellis, Eds., American Society for Testing and Materials, 1993, pp. 133-150.
26. Kalluri, S. and Bonacuse, P. J., "Estimation of Fatigue Life under Axial-Torsional Loading," Material Durability/Life Prediction Modeling: Materials for the 21st Century, PVP-Vol. 290, S. Y. Zamrik and G. R. Halford, Eds., American Society of Mechanical Engineers, 1994, pp. 17-33.
27. Bonacuse, P. J. and Kalluri, S., "Elevated Temperature Axial and Torsional Fatigue Behavior of Haynes 188," Journal of Engineering Materials and Technology, Vol. 117, April 1995, pp. 191-199.
28. Bonacuse, P. J. and Kalluri, S., "Axial-Torsional, Thermomechanical Fatigue Behavior of Haynes 188 Superalloy," Thermal Mechanical Fatigue of Aircraft Engine Materials, AGARD-CP-569, Advisory Group for Aerospace Research & Development, Neuilly-sur-Seine, France, 1996, pp. 15-1-15-10.
29. Kalluri, S. and Bonacuse, P. J., "An Axial-Torsional, Thermomechanical Fatigue Testing Technique," Multiaxial Fatigue and Deformation Testing Techniques, ASTM STP 1280, S. Kalluri and P. J. Bonacuse, Eds., American Society for Testing and Materials, 1997, pp. 184-207.
30. Bonacuse, P. J. and Kalluri, S., "Axial-Torsional Fatigue: A Study of Tubular Specimen Thickness Effects," Journal of Testing and Evaluation, JTEVA, Vol. 21, No. 3, 1993, pp. 160-167.
31. Ellis, J. R. and Bartolotta, P. A., "Adjustable Work Coil Fixture Facilitating the Use of Induction Heating in Mechanical Testing," Multiaxial Fatigue and Deformation Testing Techniques, ASTM STP 1280, S. Kalluri and P. J. Bonacuse, Eds., American Society for Testing and Materials, 1997, pp. 43-62.
32. Bhanu Sankara Rao, K., Kalluri, S., Halford, G. R., McGaw, M. A., "Serrated Flow and Deformation Substructure at Room Temperature in Inconel 718 Superalloy during Strain Controlled Fatigue," Scripta Metallurgica et Materialia, Vol. 32, No. 4, 1995, pp. 493-498.
33. Bhanu Sankara Rao, K., Castelli, M. G., Allen, G. P., and Ellis, J. R., "A Critical Assessment of the Mechanistic Aspects in Haynes 188 during Low-Cycle Fatigue in the Range 25°C to 1000°C," Metallurgical and Material Transactions A, Vol. 28A, 1997, pp. 347-361.
34. Poynting, J. H., "On Pressure Perpendicular to the Shear Planes in Finite Shears, and on the Lengthening of Loaded Wires when Twisted," Proceedings of the Royal Society, London, Series A, Vol. 82, 1909, pp. 546-559.
35. Poynting, J. H., "Changes in Dimensions of Steel Wire when Twisted and Pressure of Distortional Waves in Steel," Proceedings of the Royal Society, London, Series A, Vol. 86, 1912, pp. 543-561.
36. Swift, H. W., "Length Changes in Metals under Torsional Overstrain," Engineering, Vol. 163, 1947, pp. 253-257.
37. Wack, B., "The Torsion of Tube (or a Rod): General Cylindrical Kinematics and Some Axial Deformation and Ratchetting Measurements," Acta Mechanica, Vol. 80, 1989, pp. 39-59.
38. Bonacuse, P. J. and Kalluri, S., "Cyclic Axial-Torsional Deformation Behavior of a Cobalt-Base Superalloy," Cyclic Deformation, Fracture, and Nondestructive Evaluation of Advanced Materials: Second Volume, ASTM STP 1184, M. R. Mitchell and O. Buck, Eds., American Society for Testing and Materials, 1994, pp. 204-229.
39. Kalluri, S., McGaw, M. A., and Halford, G. R., "Fatigue Life Estimation under Cumulative Cyclic Loading Conditions," accepted for publication in Fatigue and Fracture Mechanics: 31st Volume, STP 1389, G. R. Halford and J. P. Gallagher, Eds., American Society for Testing and Materials, 2000.