Damage-tolerance-based design of bolted composite joints

ASTM Special Technical Publication

Volumn , Issue 1383, 2000, Pages 243-272

  Qing, Xinlin ^a   Hsien Tang, Sun ^a   Dagba, Louis ^a   Chang, Fu Kuo ^a  

^a 496 Lomita Mall   (United States)

Author keywords

3DBOLT; Bolted composite joint; Damage tolerance; Progressive damage model

Indexed keywords

EID: 0040777271     PISSN: 00660558     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Article

References (75)

1. Agarwal, B. L., "Static Strength Prediction of Bolted Joints in Composite Material," Proceedings, AIAA/ASME/ASCE/AHS, 20th Structure, Structural Dynamics and Material Conference, St. Louis, MO, April 1979, pp. 303-309.
2. Oplinger, D. W. and Gandhi, K. R., "Stresses in Mechanically Fastened Orthotropic Laminates," Proceedings of the Conference on Fibrous Composites in Flight Vehicle Design, Dayton, OH, 21-24 May 1974, Air Force Flight Dynamics Laboratory Report No. AFFDL-TR-74-103, pp. 811-842.
3. Oplinger, D. W., "Analytical Studies of Structural Performance in Mechanically Fastened Fiber-reinforced Plates," Proceedings of the Army Symposium on Solid Mechanics, 1974: The Role of Mechanics in Design - Structural Joints, Army Materials and Mechanics Research Center, Watertown, MA, Report No. AMMRC MS 74-8, pp. 211-242.
4. Garbo, S. P. and Gallo, R. L., "Strength of Laminates with Loaded Holes," presented at the 5th DOD/NASA Conference on Fibrous Composites in Structural Design, New Orleans, LA, January 1981.
5. Matthews, F. L., Joining Fiber-reinforced ed Plastics, London, Elsevier Applied Science, 1987.
6. Chang, F.-K., Scott, R. A., and Springer, G. S., "Failure of Composite Laminates Containing a Pin Loaded Holes - Method of Solution," Journal of Composite Materials, Vol. 18, 1984, pp. 255-278.
7. Chang, F.-K., Scott, R. A., and Springer, G. S., "Failure Strength of Nonlinear Elastic Composite Laminates Containing a Pin Loaded Holes," Journal of Composite Materials, Vol. 18, 1984, pp. 467-477.
8. Waszezak, J. P. and Cruse, T. A., "Failure Mode and Strength Predictions of an Isotropic Bolt-bearing Specimens," Journal of Composite Materials, Vol. 5, 1971, pp. 421-425.
9. Soni, S. R., "Stress and Strength Analysis of Bolted Joints in Composite Laminates," Composite Structures, I. H. Marshall, Ed., Applied Science Publishers, NJ, 1981, pp. 50-62.
10. Soni, S. R., "Failure Analysis of Composite Laminates with a Fastener Hole," Joining of Composite Materials, Special Technical Publications 749, Published by ASTM, Philadelphia, PA, pp. 145-164.
11. Tsujimoto, Y. and Wilson, D., "Elasto-Plastic Failure Analysis of Composite Bolted Joints," Journal of Composite Materials, Vol. 20, 1986, pp. 236-252.
12. Wilson, D. W. and Tsujimoto, Y., "On Phenomenological Failure Criteria for Composite Bolted Joint Analysis," Composite Science and Technology, Vol. 26, 1986, pp. 283-305.
13. Lessard, L. B. and Shokrieh, M. M., "Two-dimensional Modeling of Composite Pinned-joint Failure," Journal of Composite Materials, Vol. 29, No. 5, 1995, pp. 671-697.
14. Eriksson, L. I., "On the Bearing Strength of Bolted Graphite/Epoxy Laminates," Journal of Composite Material, Vol. 24, 1990, pp. 1246-1269.
15. Eriksson, L. I., "Contact Stresses in Bolted Joints of Composite Laminates," Composite Structure, Vol. 6, 1986, pp. 57-75.
16. Chiang, Y. J. and R. E. Rowlands, "Finite Element Analysis of Mixed-mode Fracture of Bolted Composite Joints," Journal of Composite Technology Research, Vol. 13, No. 4, Winter 1990, pp. 227-235.
17. Tsai, M. Y. and Morton, J., "Stress and Failure Analysis of a Pin-loaded Composite Plate: An Experimental Study," Journal of Composite Materials, Vol. 24, 1990, pp. 1101-1120.
18. Chang, F.-K. and Chang, K.-Y., "Post-Failure Analysis of Bolted Composite Joints in Tension or Shearout Mode Failure," Journal of Composite Materials, Vol. 21, 1987, pp. 809-827.
19. Crews, J. H. and Naik, R. A., "Combined Bearing and Bypass Loading on a Graphite/Epoxy Laminate," Composite Structures, Vol. 6, 1986, pp. 21-40.
20. Hart-Smith, L. J., "Mechanically-Fastened Joints for Advanced Composite-Phenomenological Considerations and Simple Analysis," Douglas paper 6748, 1978, pp. 1-32.
21. Hart-Smith, L. J., "Bolted Joints in Graphite/Epoxy Composites," NASA Cr144899, National Aeronautics and Space Administration, Washington, DC, January 1977.
22. Smith P. A., Pascoe K. J., Polak C., and Stroud D. O., "The Behavior of Single-lap Bolted Joints in CFRP Laminates," Composite Structures, Vol. 6, No. 1-3, 1986, pp. 41-55.
23. Nekrasov, Yu. A., "A Study of the Strength of Bolted Joints Between Metal and Composite Plates," Soviet Machine Science, No. 3, 1985, pp. 87-91.
24. Stockdale, J. H. and Matthews, F. L., "The Effect of Clamping Pressure of Bolt Bearing Loads in Glass Fiber-Reinforced Plastics," Composites. Vol. 7, 1971, pp. 34-38.
25. Crews, J. H., "Bolt-Bearing Fatigue of a Graphite/Epoxy Laminates," Joining of Composite Materials, ASTM STP 749, K. T. Kedward, Ed., American Society for Testing and Materials, Philadelphia, PA, 1981, pp. 131-144.
26. Matthews, F. L., Roshan, A. A., and Philips, L. N., "The Bolt Bearing Strength of Glass/Carbon Hybrid Composites," Composites, Vol. 13, 1982, pp. 225-227.
27. Collings, T. A., "On the Bearing Strength of CFRP Laminates," Composites, Vol. 13, 1982, pp. 241-252.
28. Collings, T. A. and Beauchamp M. J., "Bearing Deflection Behavior of a Loaded Hole in CFRP," Composites, Vol. 15, No. 1, 1984, pp. 33-38.
29. Cooper, C. and Turvey, G. J., "Effects of Joint Geometry and Bolt Torque on the Structural Performance of Single Bolt Tension Joints in Pultruded GRP Sheet Material," Composite Structures, Vol. 32, 1995, pp. 217-226.
30. Graham, U., Winsom, M. R., and Webber, P. H., "A Novel Finite Element Investigation of the Effects of Washer Friction in Composite Plates with Bolt-filled Holes," Composite Structures, Vol. 29, 1994, pp. 329-339.
31. Balie, J. A., Duggan, M. F., and Bradshaw, N. C., "Design Data for Graphite Cloth Epoxy Bolted Joints at Temperatures Up to 450 K," Joining of Composite Materials, ASTM STP 749, K. T. Kedward, Ed., American Society for Testing and Materials, Philadelphia, PA, 1981, pp. 165-180.
32. Herrington, P. D. and Sabbaghian, M., "Fatigue Failure of Composite Bolted Joints," Journal of Composite Materials, Vol. 27, No. 5, 1993, pp. 491-512.
33. Akay, M., "Bearing Strength of As-cured and Hydrothermally Conditioned Carbon Fiber/Epoxy Composites Under Static and Dynamic Loading," Composites, Vol. 23, No. 2, March 1989, pp. 101-108.
34. Wang, H.-S. Hung, C.-L., and Chang, F.-K., "Bearing Failure of Bolted Composite Joints. Part I: Experimental of Characterization," Journal of Composite Materials, Vol. 30, No. 12, 1996, pp. 1248-1313.
35. Hung, C.-L. and Chang, F.-K., "Bearing Failure of Bolted Composite Joints. Part II: Model and Verification," Journal of Composite Materials, Vol. 30, No. 12, 1996, pp. 1359-1400.
36. Sun, H.-T., Yan, Y., and Chang, F.-K., "Is Clamping Necessary for Bolted Composite Joints?," Proceedings of the 11th DOD/NASA/FAA Conference on Fibrous Composite in Structural Design, Fort Worth, TX, 26-28 Aug. 1996.
37. Morgan, M. E. and Beckwith, S. W., "Bolt Torque Loading and Radial Gap Effects on Thick-wall Composite Joint Strength," Proceeding of the 30th National SAMPE Symposium, 19-21 March 1985, pp. 1321-1334.
38. Horn, W. J. and Schmitt, R. R., "Influence of Clamp-up Force on the Strength of Bolted Composite Joints," AIAA Journal Vol. 32, No. 3, 1993, pp. 665-667.
39. Smith, P. A., Ashby, M. F., and Pascoe, K. J., "Modeling Clamp-up Effects in Composite Bolted Joints," Journal of Composite Materials, Vol. 21, No. 12, 1987, pp. 878-897.
40. Camanho, P. P. and Matthews, F. L., "Stress Analysis and Strength Prediction of Mechanically Fastened Joints in FRP: A Review," Composites Part A, Vol. 28A, 1997, pp. 529-547.
41. Matthews, F. L., Wong, C.-M., and Chryssafitis, S., "Stress Distribution Around a Single Bolt in Fiber-reinforced Plastic," Composites, Vol. 13, 1986, pp. 316-322.
42. Chen, W.-H., Lee, S.-S., and Yeh, J.-T., "Three-dimensional Contact Stress Analysis of a Composite Laminate with Bolted Joint," Composites Structures, Vol. 30, 1995, pp. 287-297.
43. Marshall, I. H., Arnold, W. S., and Wood, J., "Observations on Bolted Connections in Composite Structures," Composites, Vol. 13, 1989, pp. 133-151.
44. Hyer, M. W. and Klang, E. C., "Contact Stresses in Pin-loaded Orthotropic Plates," International Journal of Solids and Structures, Vol. 21, 1985, pp. 957-975.
45. Hyer, M. W., Klang, E. C., and Cooper, D. E., "The Effects of Pin Elasticity, Clearance and Friction on the Stresses in a Pin-loaded Orthotropic Plate," Journal of Composite Materials, Vol. 21, 1987, pp. 190-206.
46. Barboni, R., Gandenzi, P., and Carlini, S., "A Three-dimensional Analysis of Edge Effects in Composite Laminates with Circular Holes," Composite Structures, Vol. 15, 1990, pp.115-136.
47. Iarve, E., "Stress Analysis in Laminated Composites with Fastener Holes," Proceedings of the American Society for Composites 10th Technical Conference, Technomic Publishing Co., Lancaster, PA, 1995, pp. 408-419.
48. Iarve, E., "Three-dimensional Stress Analysis in Laminated Composites with Fasteners Based on the B-spline Approximation," Composites Part A, Vol. 28A, 1997, pp. 559-571.
49. Hassen, N. K., Mohamedien, M. A., and Rizkalla, S. H., "Finite Element Analysis of Bolted Connections for PFRP Composites," Composites Part B, Vol. 27B, 1996, pp. 339-349.
50. Lessard, L. B., "Compression Failure in Laminated Composites Containing an Open Hole," Ph.D. dissertation, Stanford University, 1989.
51. Tan, S. C. and Perez, J., "Progressive Failure of Laminated Composites with a Hole Under Compressive Loading," Journal of Reinforced Plastics and Composites, Vol. 12, 1993, pp. 1043-1057.
52. Hashin, Z., "Analysis of Orthogonally Cracked Laminates Under Tension," Journal of Applied Mechanics, Vol. 54, 1987, pp. 872-879.
53. Nuismer, R. J. and Tan, S. C., "Constitutive Relations of a Cracked Composite Lamina," Journal of Composite Materials, Vol. 22, 1988, pp. 306-321.
54. Tan, S. C. and Nuismer, R. J., "A Theory for Progressive Matrix Cracking in Composite Laminates," Journal of Composite Materials, Vol. 23, 1989, pp. 1029-1047.
55. Sun, C. T. and Jen, K. C., "On the Effect of Matrix Cracks on Laminate Strength," Journal of Reinforced Plastics and Composites, Vol. 6, 1987, pp. 208-222.
56. Tsai, C. L. and Daniel, I. M., "The Behavior of Cracked Cross-ply Composite Laminates Under Simple Shear Loading," Composite Engineering, Vol. 1. No. 1, 1991, pp. 3-11.
57. Shahid, I. and Chang, F.-K., "Modeling of Progressive Failure of Cross-ply Composites Subjected to Combined In-Plane Loads," American Society of Composites Technical Conference, November 1992.
58. Shahid, I., "Failure and Response of Laminated Composites Subjected to In-Plane Loads," Ph.D. dissertation, Stanford University, 1993.
59. Hung, C.-L., "Composite Joints Subjected to Bypass Loads," Ph.D. dissertation, Stanford University, 1993.
60. Hahn, H. T., "Nonlinear Behavior of Laminated Composites," Journal of Composite Materials, Vol. 7. 1973, pp. 257-271.
61. Serabian, S. M., "The Ettects of Nonlinear Intralaminar Shear Behavior on The Modeling Accuracy of [(0/90).0] and [± 45]. Pin-loaded Laminates," Journal of Composite Technology & Research, Vol. 13, No. 4, Winter 1991, pp. 236-248.
62. Mallick, P. K., Fiber reinforced Composites, Marcel Dekker, New York, 1988, pp. 3-4.
63. Crews, J. H., Jr. and Naik, R. A., "Failure Analysis of a Graphite/Epoxy Laminate Subjected to Boll-Bearing Loads," Composite Materials: Fatigue and Fracture, ASTM STP 907, H. T. Hahn, Ed., American Society for Testing and Materials, Philadelphia, PA, 1986, pp. 131-144.
64. Jurf, R. A. and Vinson, J. R., "Failure Analysis of Bolted Joints in Composite Laminates," Composite Materials: Testing and Design (Ninth Volume), ASTM STP 1059, S. P. Garbo, Ed., American Society for Testing and Materials, Philadelphia, PA, 1990, pp. 165-190.
65. Eriksson, I., "On the Bearing Strength of Bolted Graphite/Epoxy Laminates," Journal of Composite Materials, Vol. 24, 1990, pp. 1246-1270.
66. Serabian, S. M. and Oplinger, D. W., "An Experimental and Finite Element Investigation into the Mechanical Response of 0/90 Pin-Loaded Laminates," Journal of Composite Materials, Vol. 21, 1987, pp. 631-649.
67. Bathe, K. J., Finite Element Procedures in Engineering Analysis, Prentice-Hall, Inc., NJ, 1982.
68. Suh, J.-K., Spilker, R. L., and Holmes, M. H., "A Penalty Finite Element Analysis for Nonlinear Mechanics of Biphasic Hydrated Soft Tissue Under Large Deformation." International Journal for Numerical Methods in Engineering, Vol. 32, 1991, pp. 1411-1439.
69. Zienkiewicz, O. C., The Finite Element Method, 4th ed., McGraw-Hill, 1989.
70. Hibbit, Karlsson & Sorensen Inc., Writing UMATs and Vumats, Volume II, Hibbit, Karlsson & Sorensen Inc., Pawtucket, RI, 1995.
71. Hibbit, Karlsson & Sorensen Inc., ABAQUS/Standard Theory Manual, Hibbit, Karlsson & Sorensen Inc., Pawtucket, RI, 1995.
72. Sun, H. T., "Analysis of Composite-to-.Metal Double-Lap Bolted Joints," Ph.D. dissertation, Stanford University, 1997.
73. Chang, F.-K., Qing, X., Sun, H.-T., and Yan, Y., "Damage Tolerance-Based Design of Bolted Composite Joints," Final Report to the Boeing Commercial Airplane Groups and the Federal Aviation Administration, Aeronautics and Astronautics Department, Stanford University, 1999.
74. Stouffer, D. C. and Dame, L.-T., Inelastic Deformation of Metals, Models, Mechanical Properties and Metallurgy, Wiley & Sons, Inc., 1996.
75. Yan, Y., Wen, W.-D., Chang, F.-K., and Shyprykevich, P., "Experimental Study on Clamping Effects on the Tensile Strength of Composite Plats with a Bolt-Filled Hole," Composite: Part A, Vol. 30, 1999, pp. 1215-1229.