Developments in dynamics of composite material shafts

International Journal of Rotating Machinery

Volumn 3, Issue 3, 1997, Pages 189-198

  Singh, S P ^a   Gubran, H B H ^b   Gupta, K ^b  

^a DR B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

Author keywords

Composite shaft; Driveshaft design; Dynamics; Non metallic rotors

Indexed keywords

EID: 0040766255     PISSN: 1023621X     EISSN: 15423034     Source Type: Journal    
DOI: 10.1155/S1023621X97000183     Document Type: Review

References (67)

1. Andriulli, J. B. (1989). Measured Damping and Modulus of Composite Cylinders, Proceedings Damping '89, pp. BCC-1-BCC-26.
2. Ayers, T. R., and Ochoa, O. O. (1993). Effects of Ballistic Damage on Dynamics of Composite Drive Shaft, Proceedings of ASME 16th Annual Energy-Sources Technology Conference & Exhibition, Houston, PD Vol. 53, pp. 243-247.
3. Bank, L. C. and Kao, C. H. (1990). Dynamic Response of Thin Walled Composite Material Timoshenko Beams, Journal of Energy Resources Technology, Vol. 112, pp. 149-154.
4. Bauchau, O. A. (1981). Design, Manufacturing and Testing of High Speed Rotating graphite/epoxy Shafts, Doctorate Thesis, Department of Aeronautics and Astronautics, MIT.
5. Bauchau, O. A. (1983). Optimal Design of High Speed Rotating graphite/epoxy Shafts, Journal of Composite Materials, Vol. 17, pp. 170-181.
6. Bauchau, O. A. and Chiang, W. (1993). Dynamic Analysis of Rotor Flexbeams based on Nonlinear Anisotropic Shell Models, Journal of American Helicopter Society, Vol. 38, no. 1, pp. 55-61.
7. Bauchau, O. A., Krafchack, T. M. and Hayes, J. F. (1988). Torsional Buckling Analysis and Damage Tolerance of graphite/epoxy Shafts, Journal of Composite Materials, Vol. 22, pp. 258-270.
8. Baz, A. and Chen, T. (1993). Torsional stiffness of NITI-NOL-Reinforced Composite Drive Shafts, Composite Engineerings, Vol. 3, no. 3, pp. 1119-1130.
9. Belingardi, G., Calderale, P. M. and Rosetto, M. (1990). Design of Composite Material Drive Shafts for Vehicular Applications, International Journal of Vehicle Design, Vol. 11, no. 6, pp. 553-563.
10. Belingardi, G., Genta, G. and Campagna, P. (1985). Hybrid Composite Technology for Automotive Drive Shaft: a Computer aided Optimization, Proceedings of International Symposium on Automotive Technology and Automation (ISATA 85), Graz Austria, Vol. 2, pp. 511-524.
11. Berg, K. R. (1985). Cost Sensitivity in Composite Driveshafts, Advanced Composites-Conference Proceedings, Dearborn, Michigan, USA, pp. 59-68.
12. Berg, K. R. (1989). Composite Driveshafts in Cooling Towers, Journal of Cooling Tower Institute, Vol. 10, no. 1, pp. 36-37, 40-43.
13. Bert, C. W. (1993). The Effect of Bending-Twisting Coupling on the Critical Speed of a Driveshaft", Proceedings 6th Japan-US Conference on Composite Materials, Orlando, FL, Techonomic, Lancaster, PA, pp. 29-36.
14. Bert, C. W. and Kim, C. D., 1995a. Dynamic Instability of Composite-Material Drive Shaft Subjected to Fluctuating Torque and/or Rotational Speed", Dynamics and Stability of Systems, Vol. 10, no. 2, pp. 125-147.
15. Bert, C. W. and Kim, Chun-Do (1995b). Analysis of Buckling of Hollow Laminate Composites Drive Shafts, Composite Science and Technology, Vol. 53, no. 3, pp. 343-351.
16. Bert, C. W. and Kim, C. D. (1995c). Whirling of Composite Material Driveshafts including Bending-Twisting Coupling and Transverse Shear Deformation, ASME Journal of Vibration and Acoustics Vol. 117, no. 1, pp. 17-21.
17. Bielefield, M. (1994). Fabrication of Braided RTM Driveshaft Tubes for the RAH-60 Comanche, Proceedings of the 50th Annual Forum of American Helicopter Society, Washington, DC, USA, Vol. 2, pp. 1001-1015.
18. Brown, T. S. and Rezin, D. B. (1979). Hybrid Composite Drive Shaft Design Considerations, ASME Special Publication, Modern Developments in Composite Materials and Structures, Winter Annual Meeting, pp. 173-187.
19. Chandramouli, G., Gupta, K. and Pandey, R. K. (1994). Delamination Propagation in Rotating carbon-epoxy Composite Shafts, Engineering Fracture Mechanics, Vol. 49, no. 1, pp. 121-132.
20. Cox, J. (1994). Carbon Fiber Shafts., Papermaker, Vol. 57, no. 10, p. 25.
21. Darlow, M. S. and Creonte, J. (1995). Optimal Design of Composite Helicopter Power Transmission Shafts with Axially Varying Fiber Layup, Journal of American Helicopter Society, Vol. 40, no. 2, pp. 50-56.
22. Dos Reis Henrique, L. M. and Goldman, R. B. (1987a). Thin Walled Laminated Composite Cylindrical Tubes-Part I-Boundary Value Problems, ASTM Journal of Composites Technology and Research, Vol. 9, no. 2, pp. 47-52.
23. Dos Reis Henrique, L. M. and Goldman, R. B. (1987b). Thin Walled Laminated Composite Cylindrical Tubes-Part II-Bending Analysis, ASTM Journal of Composites Technology and Research, Vol. 9, no. 2, pp. 53-57.
24. Dos Reis Henrique, L. M., Goldman, R. B. and Verstrate, P. H. (1987c). Thin Walled Laminated Composite Cylindrical Tubes-Part III, Critical Speed Analysis, ASTM Journal of Composites Technology and Research, Vol. 9, no. 2, pp. 58-62.
25. Faust, H. et al. (1988). Development of an Integral Composite Drive Shaft and Coupling, AHS National Technical Specialists Meeting on Advanced Rotorcraft Structures, Williamsburg VA.
26. Figge I. E., et al. (1974). Low Weight Impact Resistant Helicopter Driveshafts, Composite materials: Testing and Design (Third Conference) ASTM STP 546, American Society for Testing and Materials, pp. 651-662.
27. Fish, J. C. (1991). Stress Analysis of Composite Rotor Systems, Proceedings of Annual Forum of American Helicopter Society, Alexandria, Vol. 1, pp. 615-627.
28. Frederick, J. R. and Darlow, M. S. (1991). Operation of Torsionally Loaded Composite Shaft above two flexural critical speeds, 13th Biennial Conference on Mechanical Vibration and Noise, presented at 1991 ASME Design Technical Conference, Miami, FL, USA, Vol. 36, pp. 247-255.
29. Fromknecht, T. G. (1992). Composite Technology in Couplings and Shaftings for Power Transmission, Proceedings ASME International Power Transmission and Gearing Conference, DE, Vol. 43, pt 2, pp. 575-581.
30. Garguilo, D. J. (1986). Design and Development of a Power Takeoff Shaft, Journal of Aircraft, Vol. 23, no. 12. pp. 876-880.
31. Golding, J. H. (1982). Fiber Reinforced Plastics in the Manufacture of Automotive Propeller Shafts, Proceedings Drive and Plastics Conference. (Plastics & Rubber Institute, London), p. 3.1-3.15.
32. Gross, R. S. and Goree, J. G. (1993). Experimental and Analytical Investigations of Composite Drive Shafts with Noncircular end Cross Sections, Journal of Composite Materials, Vol. 27, no. 7, pp. 702-720.
33. L33] Gubran, H. B. H. (1994). Optimum Design of a Helicopter Tail Rotor Made of Composite Material.", Masters Thesis, Mechanical Engineering Department, IIT, Delhi, India.
34. Gupta, K. (1994). Some Issues on Design and Development of an all Composite Aero Gas Turbine Engine Rotor, Proceedings National Symposium on Developments in Advanced Composites and Structures, DRDL, Hyderabad, India, pp. 110-117.
35. Gupta, K. and Singh, S. P. (1996). Dynamics of Composite Rotors, Proceedings of Indo-US symposium on Emerging Trends in Vibration and Noise Engineering, New Delhi, India, pp. 59-70
36. Gupta, K., Kadre, S., and Sigh, S. P. (1994). Design Alternatives for a Fiber Reinforced Composite Helicopter Tail Drive Rotor, Proceedings of National Symposium on Developments in Advanced Composites and Structures, DRDL, Hyderabad, India, pp. 17-24.
37. Hetherington, P. L., Kraus, R. F. and Darlow, M. S. (1990). Demonstration of a Super Critical Composite Helicopter Power Transmission Shaft, Journal of American Helicopter Society, Vol. 35, no. 1, pp. 23-28.
38. Hoffmann, W. (1989). Fiber Composite in the Driveline, Plastics and Rubber International, Vol. 14, no. 5, pp. 46-49.
39. Hoffmann, W. Schafferus, T. and Rouillot, M. (1994). Second Generation of Composite Propshafts, ATZ Automobiltechnische-Zeitschrift, Vol. 96, no. 10, pp 612-617.
40. Irretier, H. (1993). Crack Detection in Composite Driving Shafts by Experimental Modal Analysis, DE-Vol. 64, Vibration, Shock, Damage, and Identification of Mechanical Systems, ASME, pp. 23-38.
41. Kim, C. D. and Bert, C. W. (1993). Critical Speed Analysis of Laminated Composite Driveshafts, Composites Engineering, Vol. 3, nos. 7-8, pp. 633-643.
42. Kliger, H. S. and Yates, D. N. (1980). Design and Material Implications of Composite Drive Shafts, Advances in Composite Materials, ICCM3, Edited by A. R. Bunsell, Oxford, Pergamon Press, pp. 1335-1346.
43. Kraus, R. F. (1988). Design and Experimental Studies on Supercritical Composite Power Transmission Shafting, Doctorate Thesis, Department of Mechanical Engineering, Aeronautical Engineering and Mechanics, RPI.
44. Kraus, R. F. and Darlow, M. S. (1987). Design and Experimental Studies of Composite Power Transmission Shafting, American Helicopter Society 43rd Annual Forum, St. Louis, Mo., Vol. 2, pp. 733-738.
45. Lim, J. W. and Darlow, M. S. (1986). Optimal Sizing of Composite Power Transmission Shafting, Journal of American Helicopter Society, Vol. 31, no. 1, pp. 75-83.
46. Linsenmann, D. R. (1978). Hybridization for Cost Effective Design, ASME Special Publication, Composite Materials in The Automobile Industry, Winter Annual Meeting, pp. 43-50.
47. Margasahayam, R. N. and Faust, H. S. (1988). Composite Drive Shaft Coupling for Future Rotorcraft: A 3D Finite Element Analysis, ASME Design Automation Conference, Design Engineering Div, DE. Vol. 14, pp. 337-343.
48. Minguet, P. J. A. (1993). Damage Tolerance Evaluation of New Manufacturing Techniques for Composite Helicopter Drive Shafts, AIAA-93-1400-CP, pp. 867-876.
49. Pagano N. J. and Whitney, J. M. (1970). Geometric Design of Composite Cylindrical Characterization Specimens, Journal of Composite Materials, Vol. 4, pp. 340-353.
50. Raghava, R. S. and Hammond, R. S. (1984). Development of a Filament Wound Composite Shaft for an Aircraft Generator, Technical Sessions of the 39th Annual Conference-Reinforced Plastics/Composites Institute, Newyork, pp. 1-24.
51. Singh, S. P. (1992). Some Studies on Dynamics of Composite Shafts, Ph.D thesis, Mechanical Engineering Department, IIT, Delhi, India.
52. Singh, S. P. and Gupta, K. (1993). Modal Testing of Tubular Composite Shafts, Proceedings of the 11th International Modal Analysis Conference, Florida, USA, pp. 733-739.
53. Singh, S. P. and Gupta, K. (1994a). Free Damped Flexural Vibration Analysis of Composite Cylindrical Tubes using Beam and Shell Theories, Journal of Sound and Vibration, Vol. 172, no. 2, pp. 171-190.
54. Singh, S. P. and Gupta, K. (1994b). Damped Free Vibrations of Layered Composite Cylindrical Shells, Journal of Sound and Vibration, Vol. 172, no. 2, pp. 191-209.
55. Singh, S. P. and Gupta, K. (1994c). Dynamic Analysis of Composite Rotors, 5th International Symposium on Rotating Machinery (ISROMAC-5), also International Journal of Rotating Machinery, Vol. 2, no. 3, pp. 179-186, 1996.
56. Singh, S. P. and Gupta, K. (1995). Experimental Studies on Composite Shafts, Proceedings of the International Conference on Advances in Mechanical Engineering, Bangalore, India, pp. 1205-1221.
57. Singh, S. P. and Gupta, K. (1996a). Rotordynamic Experiments on Composite Shafts. To appear in ASTM Journal of Composite Technology and Research.
58. Singh, S. P. and Gupta, K. (1996b). Composite Shaft Rotordynamic Analysis using a Layerwise Theory, Journal of Sound and Vibration, Vol. 191, no. 5, pp 739-756.
59. Spencer, A. (1987). Young's Modulus and Shear Modulus of a Composite Shaft from Resonance Measurements, Composites Science and Technology, Vol. 28, no. 3, pp. 173-191.
60. Spencer, B. E. (1989). Advances in Power Transmission using Filament Wound Composites, 34th International SAMPE Symposium and Exhibition, Vol. 34, Tomorrow's Materials: Today, pp. 1109-1117.
61. Spencer, B. and McGee, J. (1985). Design Methodology for a Composite Driveshaft, Advanced Composites, Conference Proceedings, Dearborn, Michigan, pp. 69-82.
62. Whitney, J. M. (1971). On the use of Shell Theory for Determining Stresses in Composite Cylinders, Journal of Composite Materials, Vol. 5, pp. 340-353.
63. Wilhelmi, G. F. Appleman, W. M. and Loo, F. T. C. (1986). Composite Shafting for Naval Propulsion Systems, Naval Engineers Journal, Vol. 98, no. 4, pp. 129-136.
64. Worgan, G. and Smith, D. (1978). Carbon Fiber Driveshaft, US Patent no. 4089190.
65. Yates, D. and Rezin, D. (1979). Carbon Fiber Reinforced Composite Driveshafts, US Patent no. 4171626.
66. Zinberg, H. and Symmonds, M. F. (1970). The Development of an Advanced Composite Tail Rotor Driveshaft, Presented at 26th Annual National Forum of American Helicopter Society, Washington, DC.
67. Zorzi, E. S. and Giordano, J. C. (1985). Composite Shaft Rotor Dynamic Evaluation, Presented at ASME Design Engineering Conference on Mechanical Vibrations and Noise, Sept. 1985, ASME paper no. 85-DET-114, pp. 1-8.