A rationale for the quality index of Al-Si-Mg casting alloys

International Journal of Cast Metals Research

Volumn 10, Issue 5, 1998, Pages 293-299

  Caceres C H ^a  

^a UNIVERSITY OF QUEENSLAND   (Australia)

Author keywords

A356 alloy; Al Si Mg casting alloys; Quality index; Strain hardening rate; Tensile ductility; Tensile strength

Indexed keywords

EID: 0040578381     PISSN: 13640461     EISSN: None     Source Type: Journal    
DOI: 10.1080/13640461.1998.11819245     Document Type: Article

References (47)

1. M. Drouzy, S. Jacob and M. Richard, "Interpretation of tensile results by means of quality index and probable yield strength", AFS Int. Cast Metals Jnl., 1980, 5, 43-50.
2. T. Din, A. K. M. B. Rashid and J. Campbell, "High strength aerospace casting alloys: quality factor assessment", Mater. Sci. Technol., 1996, 12, 269-273.
3. D. L. McLellan, "Modeling microstructural characteristics of Al-Si-Mg castings to develop product assurance", Trans. Amer. Foundrymen's Soc., 1982, 90, 173-191.
4. B. Closset and J. E. Gruzleski, "Mechanical properties of A356.0 alloys modified with pure strontium", Trans. Amer. Foundrymen's Soc., 1982, 90, 453-464.
5. G. E. Nagel, J. P. Mouret and J. Dubruelh, "A 357 type alloy with improved properties", Trans. Amer. Foundrymen's Soc., 1983, 91, 157-160.
6. G. K. Sigworth, S. Shivkumar and D. Apelian, "The influence of molten metal processing on mechanical properties of cast Al-Si-Mg alloys", Trans. Amer. Foundrymen's Soc., 1989, 97, 811-824.
7. F. Paray and J. E. Gruzleski, "Microstructure-mechanical property relationships in a 356 alloy. Part II: Mechanical properties", Cast Metals, 1994, 7, 153-163.
8. Y. H. Tan, S. L. Lee and Y. L. Lin, "Effects of Be and Fe content on plane strain fracture toughness in A357 alloys", Metall. Mater. Trans., 1995, 26A, 2937-2945.
9. R. E. Spear and G. R. Gardner, "Dendrite cell size", Trans. Amer. Foundrymen's Soc., 1963, 71, 209-215.
10. C. H. Cáceres, C. J. Davidson and J. R. Griffiths, "The deformation and fracture behaviour of an Al-Si-Mg casting alloy", Mater. Sci. Engng., 1995, A197, 171-179.
11. C. H. Cáceres and Q. G. Wang, "Dendrite cell size and ductility of Al-Si-Mg casting alloys. Spear and Gardner revisited", Int.J.Cast Metals Res., 1996, 9, 157-162.
12. R. C. Harris, S. Lipson and H. Rosenthal, "Tensile properties of aluminium-silicon-magnesium alloys and the effects of sodium modification", Trans. Amer. Fmmdrymen's Soc., 1956, 64, 470-481.
13. S. Shivkumar, C. Keller and D. Apelian, "Ageing behavior in cast Al-Si-Mg alloys", Trans. Amer. Foundrymen's Soc., 1990, 98, 905-910.
14. G. A. Edwards, K. Stiller, G. L. Dunlop and M. J. Couper, "The composition of fine-scale precipitates in Al-Mg-Si alloys", Mater. Sci. Forum, 1996, 217-222, 713-718.
15. B. Closset and J. E. Gruzleski, "Structure and properties of hypoeutectic Al-Si-Mg alloys modified with pure strontium", Met. Trans., 1982, 13A, 945-951.
16. D. A. Granger, R. R. Sawtell and M. M. Kersker, "Effect of Beryllium on the properties of A357.0 castings", Trans. Amer. Foundrymen's Soc., 1984, 92, 579-586.
17. A. Herrera and V. Kondic, Effect of porosity on tensile properties of two Al-Si alloys, pp. 460-465; Ed: J. D. Hunt. Proc. Int. Conf. on Solidification and Casting of Metals, Sheffield, July 18-21, 1977 (The Metals Society, London, 1979).
18. J. A. Eady and D. M. Smith, "The effect of porosity on the tensile properties of aluminium castings", Materials Forum, 1986, 9, 217-223.
19. M. K. Surappa, E. W. Blank and J. C. Jaquet, "Effect of macroporosity on the strength and ductility of cast Al-7Si-0.3Mg alloy", Scripta Metall., 1986, 20, 1281-1286.
20. A. M. Samuel and F. H. Samuel, "Porosity factor in quality aluminum castings", Trans. Amer. Foundrymen's Soc., 1992, 100, 657-665.
21. C. H. Cáceres and B. I. Selling, "Casting defects and the tensile properties of an Al-Si-Mg alloy", Mater. Sci. Engng., 1996, A220/1-2, 109-116.
22. S. F. Frederick and W. A. Bailey, "The relation of ductility to dendrite cell size in a cast Al-Si-Mg alloy", Trans. Metall. Soc. AIME, 1968, 242, 2063-2067.
23. K. J. Oswalt and M. S. Misra, "Dendrite arm spacing (DAS): a non destructive test to evaluate tensile properties of premium quality alloy (Al-Si-Mg) castings", Trans. Amer. Foundrymen's Soc., 1980, 88, 845-862.
24. A. Hetke and R. B. Gundlach, "Aluminium casting quality in alloy 356 engine components", Trans. Amer. Foundrymen's Soc., 1994, 102, 367-380.
25. S. Shivkumar, S. Ricci Jr., B. Steenhoff, D. Apelian and G. K. Sigworth, "An experimental study to optimize the heat treatment of A356 alloy", Trans. Amer. Foundrymen's Soc., 1989, 97, 791-810.
26. C. H. Cáceres and Q. G. Wang, "Solidification conditions, heat treatment and the tensile ductility of Al-7Si-0.4Mg casting alloys", Trans. Amer. Foundrymen's Soc., 1996, 104, 1039-1043.
27. C. H. Cáceres, J. R. Griffiths and P. Reiner, "The influence of microstructure on the Bauschinger effect in an Al-Si-Mg casting alloy", Acta Mater., 1996, 44, 15-24.
28. Q. G. Wang and C. H. Caceres, "On the strain hardening behaviour of Al-Si-Mg casting alloys", Mater. Sci. Engng., 1997, A234-236, 106-109.
29. J. G. Morris, "Dynamic strain aging in aluminum alloys", Mater. Sci. Engng., 1974, 13, 101-108.
30. R. Kapoor and K. S. Vecchio, "Deformation behavior and failure mechanisms in particulate reinforced 6061 Al metal-matrix composites", Mater. Sci. Engng., 1995, A202, 63-75.
31. J. M. Dowling and J. W. Martin, "The influence of Mn additions on the deformation behaviour of an Al-Mg-Si alloy", Acta Metall., 1976, 24, 1147-1153.
32. J. W. Martin, Micromechanisms in particle hardened alloys (Cambridge University Press, Cambridge, 1980), p. 122.
33. K. Banizs, "Dislocations structures caused by plastic deformation in an aged Al-Mg-Si alloy", Mater. Sci. Engng., 1979, A41, 17-24.
34. J. W. Martin, Micromechanisms in particle hardened alloys (Cambridge University Press, Cambridge, 1980), p. 103.
35. F. A. Nichols, "Plastic instabilities and uniaxial tensile ductilities", Acta Metall., 1980, 28, 663-673.
36. G. E. Dieter, Mechanical Metallurgy (McGraw-Hill, New York, 1986), pp. 287-290.
37. E. W. Hart, "Theory of the tensile test", Acta Metall., 1967, 15, 351-355.
38. A. Kelly, Strong solids (Clarendon Press, Oxford, 1973), p. 116.
39. W. H. Hunt, J. R. Brockenbrough and P. E. Magnusen, "An Al-Si-Mg composite model system: microstructural effects on deformation and damage evolution", Scripta Metall. Mater., 1991, 25, 15-20.
40. L. M. Brown and W. M. Stobbs, "The work hardening of Copper-Silica I. A model based on internal stresses, with no plastic relaxation", Phil. Mag., 1971, 23, 1185-1199.
41. L. M. Brown and W. M. Stobbs, "The Work Hardening of Copper-Silica II. The role of plastic relaxation", Phil. Mag., 1971, 23, 1201-1233.
42. C. H. Cáceres and J. R. Griffiths, "Damage by the cracking of silicon particles in an Al-7Si-0.4Mg casting alloy", Acta Mater., 1996, 44, 25-34.
43. S. F. Corbin and D. S. Wilkinson, "Influence of matrix strength and damage accumulation on the mechanical response of a particulate metal matrix composite", Acta Metall. Mater., 1994, 42, 1329-1335.
44. D. J. Lloyd, "Particle reinforced aluminium and magnesium matrix composites", Int. Mater. Rev., 1994, 39, 1-23.
45. 3 composites", Acta Mater., 1996, 44, 3077-3088.
46. R. E. Stoltz and R. M. Pelloux, "The Bauschinger effect in precipitation strengthened aluminium alloys", Met. Trans., 1976, 7A, 1295-1306.
47. T. K. Hidayetoglu, P. N. Pica and W. L. Haworth, "Aging dependence of the Bauschinger effect in aluminum alloy 2024", Mater. Sci. Engng., 1985, 73, 65.