Search-based selection of sample points for form error estimation

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 11, Issue , 2000, Pages 73-80

  Badar, M Affan ^a   Raman, Shivakumar ^a   Pulat, P Simin ^a  

^a University of Oklahoma   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0039927696     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Article

References (54)

1. ASME Y14.5M-1994, Dimensioning and Tolerancing, ASME, New York.
2. Dowling, M.M., Griffin, P.M., Tsui, K.-L., and Zhou, C., 1997, "Statistical Issues in Geometric Feature Inspection Using Coordinate Measuring Machines," Technometrics, Vol. 39, No. 1, pp. 3-17.
3. Reklaitis, G.V., Ravindran, A., and Ragsdell, K.M., 1983, Engineering Optimization: Methods and Applications, John Wiley & Sons, New York.
4. Glover, F. and Laguna, M., 1997, Tabu Search, Kluwer Academic Publishers, Boston, MA.
5. Babu, U., Raja, J., and Hocken, R.J., 1993, "Sampling Methods and Substitute Geometry Algorithms for Measuring Cylinders in Coordinate Measuring Machines," Proceedings of the Eighth Annual Meeting, American Society for Precision Engineering, pp. 70-73.
6. Carr, K., and Ferreira, P., 1995a, "Verification of Form Tolerances Part I: Basic Issues, Flatness, and Straightness," Precision Engineering, Vol. 17, No. 2, pp. 131-143.
7. Carr, K., and Ferreira, P., 1995b, "Verification of Form Tolerances Part II: Cylindricity and Straightness of a Median Line," Precision Engineering, Vol. 17, No. 2, pp. 144-156.
8. Chang, H. and Lin, T.W., 1993, "Evaluation of Circularity Tolerance Using Monte Carlo Simulation for Coordinate Measuring Machine," International Journal of Production Research, Vol. 31, No. 9, pp. 2079-2086.
9. st CIRP International Seminar on Manufacturing Systems, pp. 367-372.
10. Chung, S.-H. and Raman, S., 1999, "Non-linear Methods for Conicity Tolerance Verification," Transactions of the NAMRI/SME, Vol. 27.
11. th International Matador Conference, Manchester, UK, pp. 481-489.
12. Fukuda, M. and Shimokohbe, A., 1984, "Algorithms for Form Error Evaluation - Methods of the Minimum Zone and the Least Squares," Proceedings of the International Symposium On Metrology for Quality Control in Production, Tokyo, pp. 197-202.
13. Kanada, T. and Suzuki, S., 1993, "Evaluation of Minimum Zone Flatness by Means of Nonlinear Optimization Techniques and Its Verification," Precision Engineering, Vol. 15, No. 2, pp. 93-99.
14. Kunzmann, H. and Waldele, F., 1988, "Performance of CMMs," Annals of the CIRP, Vol. 37, No. 2, pp. 633-640.
15. Lee, G., Mou, J., and Shen, Y., 1997, "Sampling Strategy Design for Dimensional Measurement of Geometric Features Using Coordinate Measuring Machine," International Journal of Machine Tools & Manufacture, Vol. 37, No. 7, pp. 917-934.
16. Menq, C.-H., Yau, H.-T., and Lai, G.-Y., 1992, "Automated Precision Measurement of Surface Profile in CAD - Directed Inspection," IEEE Transactions On Robotics and Automation, Vol. 8, No. 2.
17. Menq, C.-H., Yau, H.-T., Lai, G.-Y., and Miller, R.A., 1990, "Statistical Evaluation of Form Tolerances Using Discrete Measurement Data," Advances in Integrated Product Design and Manufacturing, P.H. Cohen and S.B. Joshi eds., PED-Vol. 47, ASME
18. Winter Annual Meeting, Dallas, Nov 25-30, pp. 135-149.
19. 1 - Approximation," Computer Methods in Applied Mechanics and Engineering, Vol. 162, No. 1-4, pp. 133-149.
20. Namboothiri, V.N.N. and Shunmugam, M.S., 1998b, "Function-Oriented Form Evaluation of Engineering Surfaces," Precision Engineering, Vol. 22, No. 2, pp. 98-109.
21. Namboothiri, V.N.N. and Shunmugam, M.S., 1999, "On Determination of Sample Size in Form Error Evaluation Using Coordinate Metrology," International Journal of Production Research, Vol. 37, No. 4, pp. 793-804.
22. Orady, E.A., Li, S., and Chen, Y., 1996a, "Evaluation of Minimum Zone Straightness by Nonlinear Optimization Method," Manufacturing Science and Engineering, MED-Vol. 4, Proceedings of the 1996 ASME Int. Mech. Eng. Congress and Exposition, Atlanta, Nov. 17-22, pp. 413-423.
23. Orady, E., Li, S., and Chen, Y., 1996b, "A Fitting Algorithm for Determination of Minimum Zone Form Tolerances," SAE Transactions, Vol. 105, Sec. 6, pp. 1502-1508.
24. Shao, J. and Tsui, K.-L., 1996, "Form Tolerance Estimation Using Jackknife Methods," Manufacturing Science and Engineering, MED-Vol. 4, Proceedings of the 1996 ASME Int. Mech. Eng. Congress and Exposition, Atlanta, Nov. 17-22, pp. 433-445.
25. Shunmugam, M.S., 1986, "On Assessment of Geometric Errors," International Journal of Production Research, Vol. 24, No. 2, pp. 413-425.
26. Shunmugam, M.S., 1987a, "Comparison of Linear and Normal Deviations of Forms of Engineering Surfaces," Precision Engineering, Vol. 9, No. 2, pp. 96-102.
27. Shunmugam, M.S., 1987b, "New Approach for Evaluating Form Errors of Engineering Surfaces," Computer-Aided Design, Vol. 19, No. 7, pp. 368-374.
28. Shunmugam, M.S., 1991a, "Criteria for Computer-Aided Form Evaluation," Transactions of the ASME, Journal of Engineering for Industry, Vol. 113, No. 2, pp. 233-238.
29. Shunmugam, M.S., 1991b, "Establishing Reference Figures for Form Evaluation of Engineering Surfaces," Journal of Manufacturing Systems, Vol. 10, No. 4, pp. 314-321.
30. Stein, M., 1987, "Large Sample Properties of Simulations Using Latin Hypercube Sampling," Technometrics, Vol. 29, No. 2, pp. 143-151.
31. Sweet, A.L., Noller, D., and Lee, S.-H., 1985, "Statistical Design for the Location of Planes and Circles When Using a Probe," Precision Engineering, Vol. 7, No. 4, pp. 187-194.
32. Traband, M.T., Joshi, S., Wysk, R.A., and Cavalier, T.M., 1989, "Evaluation of Straightness and Flatness Tolerances Using the Minimum Zone," Manufacturing Review, Vol. 2, No. 3, pp. 189-195.
33. Wang, Y., 1992, "Minimum Zone Evaluation of Form Tolerances," Manufacturing Review, Vol. 5, No. 3, pp. 213-220.
34. Weckenmann, A., Eitzert, H., Garmer, M., and Weber, H., 1995, "Functionality-Oriented Evaluation and Sampling Strategy in Coordinate Metrology," Precision Engineering, Vol. 17, No. 4, pp. 244-252.
35. Weckenmann, A., Heinrichowski, M., and Mordhorst, H.-J, 1991, "Design of Gauges and Multipoint Measuring Systems Using Coordinate-Measuring-Machine Data and Computer Simulation," Precision Engineering, Vol. 13, No. 3, pp. 203-207.
36. Woo, T.C. and Liang, R., 1993, "Dimensional Measurement of Surfaces and Their Sampling," Computer-Aided Design, Vol. 25, No 4, pp. 233-239.
37. Woo, T.C., Liang, R., and Pollock, S.M., 1993, "Hammersley Sampling for Efficient Surface Coordinate Measurements," Proceedings of the 1993 NSF Design and Manufacturing Systems Conference, Charlotte, NC, Jan 6-8, pp. 1489-1495.
38. Woo, T.C., Liang, R., Hsieh, C.C., and Lee, N.K., 1995, "Efficient Sampling for Surface Measurements," Journal of Manufacturing Systems, Vol. 14, No. 5, pp. 345-354.
39. Yau, H.-T. and Menq, C.-H., 1992, "An Automated Dimensional Inspection Environment for Manufactured Parts Using Coordinate Measuring Machines," International Journal of Production Research, Vol. 30, No. 7, pp. 1517-1536.
40. Yau, H.-T. and Menq, C.-H., 1996, "A Unified Least-Squares Approach to the Evaluation of Geometric Errors Using Discrete Measurement Data," International Journal of Machine Tools & Manufacture, Vol. 36, No. 11, pp. 1269-1290.
41. Yau, H.-T., 1998, "Uncertainty Analysis in Geometric Best Fit," International Journal of Machine Tools & Manufacture, Vol. 38, No. 10-11, pp. 1323-1342.
42. Zhang, Y.F., Nee, A.Y.C., Fuh, J.Y.H., Neo, K.S., and Loy, H.K., 1996, "A Neural Network Approach to Determining Optimal Inspection Sampling Size for CMM," Computer-Integrated Manufacturing Systems, Vol. 9, No. 3, pp. 161-169.
43. Hurt, J.J., 1980, "A Comparison of Several Plane Fit Algorithms," Annals of the CIRP, Vol. 29, No. 1, p 381-384.
44. rd Edition, John Wiley & Sons, New York.
45. Kim, W.-S. and Raman, S., 2000, "On the Selection of Flatness Measurement Points in Coordinate Measuring Machine Inspection," International Journal of Machine Tools & Manufacture, Vol. 40, pp. 427-443.
46. Kurfess, T.R. and Banks, D.L., 1995, "Statistical Verification of Conformance to Geometric Tolerance," Computer-Aided Design, Vol. 27, No. 5, pp. 353-361.
47. Elmaraghy, W.H., Elmaraghy, H.A., and Wu, Z., 1990, "Determination of Actual Geometric Deviations Using Coordinate Measuring Machine Data," Manufacturing Review, Vol. 3, No. 1, pp. 32-38.
48. Murthy, T.S.R. and Abdin, S.Z., 1980, "Minimum Zone Evaluation of Surfaces," International Journal of Machine Tool Design & Research, Vol. 20, No. 2, pp. 123-136.
49. Dowling, M.M., Griffin, P.M., Tsui, K.-L., and Zhou, C., 1995, "A Comparison of the Orthogonal Least Squares and Minimum Enclosing Zone Methods for Form Error Estimation," Manufacturing Review, Vol. 8, No. 2, pp. 120-138.
50. Glover, F. and Laguna, M., 1993, "Tabu Search," Modern Heuristic Techniques for Combinatorial Problems, C.R. Reeves (ed.), John Wiley & Sons, Inc., New York, pp. 70-150.
51. Glover, F., 1990a, "Tabu Search: A Tutorial," Interfaces, Vol. 20, No. 4, pp. 74-94.
52. Glover, F., 1990b, "Tabu Search - Part II," ORSA Journal on Computing, Vol. 2, No. 1, pp. 4-32.
53. Glover, F., 1989, "Tabu Search - Part I," ORSA Journal on Computing, Vol. 1, No. 3, pp. 190-206.
54. Badiru, K., 1999, "A Tabu-Search Based Algorithm for Surface Inspection," MS thesis, University of Oklahoma, Norman, OK.