Moisture sorption effects on and properties of a carbon fiber-reinforced phenylethylnyl-terminated poly(etherimide)

Journal of Composite Materials

Volumn 37, Issue 9, 2003, Pages 791-809

  Bullions, Todd A ^a   Loos, A C ^a   McGrath, J E ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

Effective moisture equilibrium content; High temperature composites; Moisture; Moisture diffusion coefficient; Phenylethynyl imides

Indexed keywords

BENDING STRENGTH; DIFFUSION; HIGH TEMPERATURE PROPERTIES; MOISTURE; RESIDUAL STRESSES; SHEAR STRENGTH;

CARBON FIBER-REINFORCED PHENYLETHYNYL-TERMINATED POLYETHERIMIDE; EFFECTIVE MOISTURE EQUILIBRIUM CONTENT; HIGH TEMPERATURE COMPOSITES; INTERLAMINAR SHEAR STRENGTH TESTS; MOISTURE ADSORPTION; MOISTURE DESORPTION; MOISTURE SORPTION EFFECTS; RESIDUAL STRESS-ACCELERATED DIFFUSION; TRANSVERSE FLEXURAL STRENGTH; VOID-ASSISTED DIFFUSION;

CARBON FIBER REINFORCED PLASTICS;

EID: 0038740877     PISSN: 00219983     EISSN: None     Source Type: Journal    
DOI: 10.1177/002199803029417     Document Type: Article

References (33)

1. Van Landingham, M.R., Edulje, R.F., and Gillespie, J.W. Jr. (1997). The Effects of Moisture on the Material Properties and Behavior of Thermoplastic Polyimide Composites. In: Gates. T.S. and Zureick, A.H. (eds), High Temperature and Environmental Effects on Polymeric Composites, Vol. 2, ASTM STP 1302, pp. 50-63, American Society for Testing and Materials, Philadelphia, PA.
2. Cornelia, D. (1994). Hygrothermal Performance of Polyimides. In: Proceedings of the International SAMPE Symposium, 39: 917-929.
3. Pratt, B.A. and Bradley, W.L. (1997) Effect of Moisture on the Interfacial Shear Strength: A Study Using the Single Fiber Fragmentation Test. In: Gates, T.S. and Zureick, A.H. (eds), High Temperature and Environmental Effects on Polymeric Composites, Vol. 2, ASTM STP 1302, pp. 64-72, American Society for Testing and Materials, Philadelphia, PA.
4. Tan, B. (1997). Synthesis and Characterization of Phenylethynyl Endcapped Polyetherimide Oligomers, Doctoral Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, VA, 24061.
5. Tan, B., Vasudean, V., Lee, Y.J., Gardner, S., Davis, R.M., Bullions, T., Loos, A.C., Parvatereddy, H., Dillard, D.A., McGrath, J.E. and Cella, J. (1997). Design and Characterization of Thermosetting Polyimide Structural Adhesive and Composite Matrix Systems, Journal of Polymer Science: Part A: Polymer Chemistry, 35: 2943-2954.
6. McGrath, J.E., Tan, B., Vasudevan, V., Meyer, G.W., Loos, A.C. and Bullions, T. (1996). Synthesis and Characterization of High Performance Thermosetting Polyimides for Structural Adhesives and Composite Matrix Systems. In: Proceedings of the International SAMPE Technical Conference, 28: 29-33.
7. Bullions, T.A., Mehta, R.H., Tan, B., McGrath, J.E. and Loos, A.C. (1997). Manufacture and Mechanical Properties of a High-Performance Thermosetting Poly(etherimide)/Continuous Carbon Fiber Composite. In: Proceedings of the International SAMPE Technical Conference, 29: 85-97.
8. Bullions, T.A., Mehta, R.H., Tan, B., McGrath, J.E., Kranbuehl, D. and Loos, A.C. (1999). Mode I and Mode II Fracture Toughness of High-Performance 3000g/mole Reactive Poly(EtherImide)/Carbon Fiber Composites, Composites Part A: Applied Science and Manufacturing, 30A(2): 153-162.
9. Bullions, T.A., Jungk, J.M., McGrath, J.E. and Loos, A.C. (2000). Moisture Sorption Effects on Carbon Fiber-Reinforced PhenylEthynyl-Terminated Ultem™ Composites, Journal of Thermoplastic Composite Materials, 30(6): 460-480.
10. Bullions, T.A., McGrath, J.E. and Loos, A.C. (2001). Monitoring the Reaction Progress of a High-Performance Phenylethynyl-Terminated Poly(etherimide), Part I: Cure Kinetics Modeling, Polymer Engineering and Science, 42(5): 1056-1069.
11. Bullions, T.A., Stoykovich, M.P., McGrath, J.E. and Loos, A.C. (2002). Monitoring the Reaction Progress of a High-Performance Phenylethynyl-Terminated Poly(etherimide), Part II: Advancement Tg, Polymer Composites, 23(4): 479-494.
12. Bullions, T.A., McGrath, J.E. and Loos, A.C. (2002): Development of a Two-Stage, Dual-Arrhenius Rheology Model for a High-Performance Phenylethynyl-Terminated Poly(etherimide), Polymer Engineering and Science, 42(11): 2182-2192.
13. Bullions, T.A. (2000). Manufacture of and Environmental Effects on Carbon Fiber-Reinforced Phenylethynyl-Terminated Poly(etherimide), Doctoral Dissertation, Virginia Polytechnic Institute and State University , Blacksburg, VA 24061.
14. Hergenrother, P.M. (2000). Development of Composites, Adhesives and Sealants for High-Speed Commercial Airplanes, SAMPE Journal, 36(1): 30-41.
15. Bucher, R.A. (1994). High Performance Thermoplastic Matrix Composite Processing: Dry Powder Prepregging, Plasma Treatment, Consolidation/Crystallization Analysis, Doctoral Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061.
16. Bucher, R.A. and Loos, A.C. (1994). Parametric Statistical Analysis of Electrostatic Powder Prepregging, Journal of Advanced Materials, 25(4): 44-50.
17. Loos, A.C., Bullions, T.A. and Bucher, R.A. (1998). Advanced Composites Fabricated From Dry Powder Prepreg. In: Proceedings of the Japan-U.S. Conference on Composite Materials, 8: pp. 43-52.
18. Bullions, T.A., Loos, A.C. and McGrath, J.E. (1999). Advanced Composites Manufactured via Dry Powder Prepregging. In: Proceedings of the International Conference on Composite Materials, 12; pages unavailable.
19. Toho Carbon Fibers, Inc., Material Brochure, 444 High Street, Suite 200 Palo Alto, CA 94301.
20. Woo, M. and Piggott, M.R. (1988). Water Absorption of Resins and Composites IV. Water Transport in Fiber Reinforced Plastics, Journal of Composites Technology and Research, 10(1): 20-24.
21. Harper, B.D., Staab, G.H. and Chen, R.S. (1987). A Note on the Effects of Voids Upon the Hygral and Mechanical Properties of AS4/3502 Graphite/Epoxy, Journal of Composite Materials, 21: 280-289.
22. Fukuda, M. and Kawai, H. (1993). Moisture Sorption Mechanism of Aromatic Polyamide Fibers: Diffusion of Moisture in Poly(p-phenylene Terephthalamide) Fibers, Textile Research Journal, 63(4): 185-193.
23. Lee, M.C. and Peppas, N.A. (1993). Models of Moisture Transport and Moisture Induced Stresses in Epoxy Composites, Journal of Composite Materials, 27(12): 1146-1171.
24. Neumann, S. and Marom, G. (1986). Free-Volume Dependent Moisture Diffusion Under Stress in Composite Materials, Journal of Materials Science, 21: 26-30.
25. Loos, A.C. and Springer, G.S. (1981). Moisture Absorption of Graphite-Epoxy Composition Immersed in Liquids and Humid Air. In: Springer, G.S. (Ed.), Environmental Effects on Composite Materials, pp. 34-50, Technomic Publishing, Inc., Westport, CT.
26. Jacobs, P.M., Simpson, M. and Jones, F.R. (1991). Generation of Thermal Strains in Carbon Fibre-Reinforced Bismaleimide (PMR-15) Composites, Composites, 22(2): 99-104.
27. Woo, M. and Piggott, M.R. (1988). Water Absorption of Resins and Composites IV. Water Transport in Fiber Reinforced Plastics, Journal of Composites Technology and Research, 10(1): 20-24.
28. Harper, B.D., Staab, G.H. and Chen, R.S. (1987). A Note on the Effects of Voids Upon the Hygral and Mechanical Properties of AS4/3502 Graphite/Epoxy, Journal of Composite Materials, 21: 280-289.
29. Fukuda, M. and Kawai, H. (1993). Moisture Sorption Mechanism of Aromatic Polyamide Fibers: Diffusion of Moisture in Poly(p-phenylene Terephthalamide) Fibers, Textile Research Journal, 63(4): 185-193.
30. Lee, M.C. and Peppas, N.A. (1993). Models of Moisture Transport and Moisture Induced Stresses in Epoxy Composites, Journal of Composite Materials, 27(12): 1146-1171.
31. Neumann, S. and Marom, G. (1986). Free-Volume Dependent Moisture Diffusion Under Stress in Composite Materials, Journal of Materials Science, 21: 26-30.
32. Loos, A.C. and Springer, G.S. (1981). Moisture Absorption of Graphite-Epoxy Composition Immersed in Liquids and Humid Air. In: Springer, G.S. (Ed.), Environmental Effects on Composite Materials, pp. 34-50, Technomic Publishing, Inc., Westport, CT.
33. Jacobs, P.M., Simpson, M. and Jones, F.R. (1991). Generation of Thermal Strains in Carbon Fibre-Reinforced Bismaleimide (PMR-15) Composites, Composites, 22(2): 99-104.