HVOF thermal spray deposited Y2O3-stabilized ZrO2 coatings for thermal barrier applications

Journal of Thermal Spray Technology

Volumn 12, Issue 2, 2003, Pages 214-225

  Dobbins, Tabbetha A ^a,b   Knight, Richard ^c   Mayo, Merrilea J ^a,d  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b Stop 8520 ^*  (United States)

^c Drexel University   (United States)

^d NATIONAL ACADEMIES OF SCIENCES   (United States)

Author keywords

HVOF; TBC; Zirconia

Indexed keywords

HYDROGEN; PLASMA SPRAYING; THERMAL BARRIER COATINGS; YTTRIUM COMPOUNDS; ZIRCONIA;

SPRAY DEPOSITION;

SPRAYED COATINGS;

EID: 0038727643     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1361/105996303770348320     Document Type: Article

References (29)

1. W.J. Brindley: "Thermal Barrier Coatings of the Future," J. Therm. Spray Technol., 1997, 6(1), pp. 3-4.
2. D.W. Parker and G. Kutner: "HVOF-Spray Technology - Poised for Growth," Adv. Mater. Proc., 1991, 4, pp. 68-74.
3. S. Joshi and R. Sivakumar: "Particle Behavior During High Velocity Oxy-Fuel Spraying," Surf. Coat. Technol., 1991, 50, pp. 67-74.
4. P.E. Arvidsson: "Comparison of Superalloy Coatings Sprayed With Plasma and HVOF," Powder Metall. Int., 1992, 24. pp. 176-79.
5. H. Kreye, S. Zimmermann, and P. Heinrich: "The Role of the Fuel Gas in the HVOF Process" in Thermal Spraying: Current Status and Future Trends, C.C. Berndt, ed., High Temperature Society of Japan, Osaka, 1995, pp. 393-98.
6. S.V. Joshi: "Comparison of Particle Heat-up and Acceleration During Plasma and High Velocity Oxy-Fuel Spraying," Powder Metall. Int., 1992, 24, pp. 373-77.
7. B. Kadyrov, Y. Evdokimenko, V. Kisel, and E. Kadyrov: "Calculation of the Limiting Parameters for Oxide Ceramic Particles During HVOF Spraying" in 1994 Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 1994, pp. 245-50.
8. C.M. Hackett and O.S. Settles: "Turbulent Mixing of the HVOF Thermal Spray and Coating Oxidation" in 1994 Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 1994, pp. 307-12.
9. V.L. Tellkamp, M.L. Lau, A. Fabel, and E.J. Lavernia: "Thermal Spraying of Nanocrystalline Inconel 718," NanoStruct. Mater., 1997, 9, pp. 489-92.
10. D.A.J. Ramm, T.W. Clyne, A.J. Sturgeon, and S. Dunkerton: "Correlations Between Spraying Conditions and Microstructure for Alumina Coalings Produced by HVOF and VPS" in 1994 Thermal Spray Industrial Applications, C.C. Berndt and S. Sampath, ed., ASM International, Materials Park, OH, 1994, pp. 239-44.
11. A.J. Sturgeon, M.F.D. Harvey, and F.J. Blunt: "The Influence of Fuel Gas on the Microstructure and Wear Performance of Alumina Coatings Produced by the High Velocity Oxyruel (HVOF) Thermal Spray Process," Brit. Ceram. Proc., 1995, 54, pp. 57-64.
12. Anon: "HVOF Spraying of Thermal Coatings-TWI, Abington, Cambridge, UK," Metallurgist, 1995, 62(3), p. 136.
13. M.S. Cole and R. Walker: "High Temperature Erosion Properties of Thermal Barrier Coatings Produced by Acetylene Sprayed High Velocity Oxygen Fuel Process" in Thermal Spray, Surface Engineering via Applied Research, C.C. Berndt, ed., ASM International, Materials Park, OH, 2000, pp. 1191-99.
14. 3 Thermal Barrier System," Adv. Ceram. Mater., 1986, 7(1), p. 68.
15. V.S. Stubican, J.R. Hellmann, and S.P. Ray: "Defects and Ordering in Zirconia Crystalline Solution," Mater. Sci. Monographs, 1982, 1, pp. 257-61.
16. E. Underwood: "Quantitative Metallography" in ASM Metals Handbook Metallography and Microstructures, Vol. 9, J.R. Davis, ed., ASM International, Metals Park, OH, 1985, p. 123.
17. D.B.Cullity: Elements of X-Ray Diffraction, 2nd ed., Addison-Wesley, Reading, MA, 1978.
18. D. Cheng, Q. Xu, G.Trapaga, and E.J. Lavemia: "A Numerical Study of High-Velocity Oxygen Fuel Thermal Spraying Process. Part I: Gas Phase Dynamics," Metall. Mater. Trans. A, 2001, 32(7), pp. 1609-20.
19. M.A. Saad: Compressible Fluid Flow, 2nd ed., Prentice Hall, Englewood Cliffs, NJ, 1985, p. 83.
20. H.H. Tawfik and F. Zimmerman: "Mathematical Modeling of the Gas Powder Flow in HVOF Systems," J. Therm. Spray Technol., 1997, 6(3), pp. 345-52.
21. F. Takahashi, M.D. Vangsness, M.D. Durbin, and W.J. Schmoll: "Structure of Turbulent Hydrogen Jet Diffusion Flames With or Without Swirl" in Proceedings of the SME Heat Transfer Division, Vol. 317-2, R.J. Cochran, ed., American Society of Mechanical Engineers, New York, NY, 1995, pp. 183-93.
22. J.C. Lau, P.J. Morris, and M.J. Fisher: "Measurements in Subsonic and Supersonic Free Jets Using a Laser Velocimeter," J. Fluid Mech., 1979, 93(1), pp. 1-27.
23. X. Yang and S. Eidelman: "Numerical Analysis of a High-Velocity Oxygen-Fuel Thermal Spray System," J. Thermal Spray Technol., 1996, 5(2), pp. 175-84.
24. W. Kollenberg and J. Decker: "Influence of Powder-Characteristics on the Microstructure of Ceramic Plasma Spray Coatings," Fresenius J. Anal. Chem., 1993, 346, pp. 327-33.
25. 3 Determined by Vickers Indentation," Scripta Mater., 1996, 34(5), pp. 809-14.
26. R.W. Rice: Porosity of Ceramics, M. Dekker, New York, NY, 1998.
27. R.A. Miller, R.G. Garlick, and J.L. Smialek: "Phase Distributions in Plasma-Sprayed Zirconia-Yttria," Ceram. Bull. 1983, 62(12), pp. 1355-58.
28. P.D. Harmswarth and R. Stevens: "The Mierostructure of Zirconia Thermal Barrier Coatings," Brit. Ceram. Proc. 1989, 42, p. 123.
29. R. Taylor, J.R. Brandon, and P. Morrell: "Mierostructure, Composition and Property Relationships of Plasma-Sprayed Thermal Barrier Coatings," Surf. Coat. Technol., 1992, 50, pp. 141-49.