An analytical model for tailor welded blank forming

Journal of Manufacturing Science and Engineering

Volumn 125, Issue 2, 2003, Pages 344-351

  Kinsey, Brad L ^a   Cao, Jian ^b  

^a Univ of New Hampshire   (United States)

^b Northwestern University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; COSTS; ENVIRONMENTAL IMPACT; MATHEMATICAL MODELS; WELDS;

BINDER FORCE FORMING; TAILOR WELDED BLANK FORMING;

FORMABILITY;

EID: 0038062639     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1537261     Document Type: Article

References (32)

1. Auto/Steel Partnership, 1995, "Tailor Welded Blank Design and Manufacturing Manual," Technical Report.
2. Eisenmenger, M., Bhatt, K. K., and Shi, M. F., 1995, "Influence of Laser Welding Parameters on Formability and Robustness of Blank Manufacturing: An Application to a Body Side Frame," SAE Technical Paper Series, Paper No. 950922, pp. 171-182.
3. Bhatt, K. K., Eisenmenger, M., and Shi, M. F., 1995, "Formability of Mash Seam Welded Blanks: Effects of Welding Set-Up Conditions," SAE Technical Paper Series, Paper No. 950923, pp. 183-189.
4. Doege, E., Dohrmann, H., and Kosters, R., 1996, "Simulation and Optimization of the Forming Process of Tailored Blanks," Proceedings of Numisheet '96, pp. 199-204.
5. Lee, A. P., Feltham, E., and Van Deventer, J., 1996, "Tailor Welded Blank Technology for Automotive Applications," Sheet Metal Stamping for Automative Applications, SAE Technical Paper Series, Paper No. 960817, pp. 91-102.
6. Kridli, G. T., Friedman, P. A., and Sherman, A. M., 2000, "Formability of Aluminum Tailor-Welded Blanks," SAE Paper No. 2000-01-0772.
7. 2 Laser Beam Welding of Aluminum 5754-O and 6111-T4 Alloys," Weld. J. (Miami), 76(7), July, pp. 275-82s.
8. Stasik, M. C., and Wagoner, R. H., 1996, "Forming of Tailor Welded Aluminum Blanks," Aluminum and Magnesium for Automotive Applications, The Minerals, Metals, & Materials Society, pp. 69-83.
9. Davies, R. W., Smith, M. T., Oliver, H. E., Khaleel, H., Pitman, S. G., 2000, "Weld Metal Ductility in Aluminum Tailor Welded Blanks," Metall. Mater. Trans. A, 31(1), pp. 2755-2763.
10. Davies, R. W., Grant, G. J., Oliver, H. E., Khaleel, H., Smith, M. T. 2001, "Forming-limit Diagrams of Aluminum Tailor-Welded Blank Weld Material," Metall. Mater. Trans. A, 32(2), pp. 275-283.
11. Viswanathan, V., Kinsey, B., and Cao, J., 2001, "Forming of Aluminum Tailor Welded Blanks," SAE Paper No. 2000-01-0822.
12. Ahmetoglu, M. A., Brouwers, D., Shulkin, L., Taupin, L., Kinzel, G. L., and Altan, T., 1995, "Deep Drawing of Round Cups from Tailor-welded Blanks," SAE Trans. 53, pp. 684-694.
13. Siegert, K., and Knabe, E., 1995, "Fundamental Research and Draw Die Concepts for Deep Drawing of Tailored Blanks," SAE Trans., 104, pp. 866-876.
14. Cao, J., and Kinsey, B., 1999, "Adaptive Method and Apparatus for Forming Tailor Welded Blanks," U.S. Patent No. 5,941,110.
15. Kinsey, B., and Cao, J., 2001, "Enhancement of Sheet Metal Formability Via Local Adaptive Controllers," Transactions of NAMRI of SME, Vol. XXIX, pp. 81-88.
16. Kinsey, B., and Cao, J., 2001, "Numerical Simulations and Experimental Implementation of Tailor Welded Blank Forming," Second Global Symposium on Innovations in Materials Processing & Manufacturing: Sheet Materials, 2001 TMS Annual Meeting.
17. Shi, M. F., Pickett, K. M., and Bhatt, K. K., 1993, "Formability Issues in the Application of Tailor Welded Blank Sheets," SAE Trans., Paper No. 930278, 102(5), pp. 27-35.
18. Cayssials, F., 2000, "An Industrial Application of Specific Forming Limit Curves for Tailor Welded Blanks," Proceedings of the 2000 International Deep Drawing Research Group, Ann Arbor, MI, June, pp. 17-22.
19. He, S., Wu, X., and Hu, S. J., 2001, "Formability Enhancement for Tailor-Welded Blanks Using Blank Holding Force Control," 2001 ASME International Congress of Mechanical Engineering Congress & Exposition.
20. Saran, M. J., Keum, Y. T., and Wagoner, R. H., 1991, "Section Analysis with Irregular Tools and Arbitrary Draw-in Conditions for Numerical Simulation of Sheet Forming," Int. J. Mech. Sci., 33(11), pp. 893-909.
21. Brooks, A., Jhita, R., and Ni, C. M., 1991, "Applications of a Two-Dimensional Metal Forming Analysis Tool to Production Stamping Problems," SAE Trans., Paper No. 910755, 100(5), pp. 751-758.
22. Hong, Y., Brad, Kinsey, and Jian, Cao, 2000, "Rapid Design of Corner Restraining Force in Deep Drawn Rectangular Parts," Int. J. Mach. Tools Manuf., 40(1), pp. 113-131.
23. Wenner, M. L., 1983, "On Work Hardening and Springback in Plane Strain Draw Forming," Journal of Applied Metal Working, 2(4), p. 277.
24. Pourboghrat, F., and Chandorkar, K., 1992, "Springback Calculation for Plane Strain Sheet Forming Using Finite Element Membrane Solution," Numerical Methods for Simulation of Industrial Metal Forming Processes, CED-Vol. 5, AMD-Vol. 156, p. 85.
25. Wang, N. M., and Tang, S. C., 1988, "Analysis of Bending Effects in Sheet Forming Operations," Int. J. Numer. Methods Eng., 25, p. 253.
26. Wang, N. M., and Wenner, M. L., 1978, "Elastic-viscoplastic Analysis of Simple Stretch Forming Problems," Mechanics of Sheet Metal Forming, Koistinen, D. P., and Wang N. M., eds., Plenum Press, New York, p. 367.
27. Wood, R. D., Mattiasson, K., Honnor, M. E., and Ziekiewicz, O. C., 1985, "Viscous Flow and Solid Mechanics Approaches to the Analysis of Thin Sheet Forming," Computer Modeling of Sheet Metal Forming Processes, Wang, N. M., and Tang, S. C., eds., AIME.
28. Zhang, Z. T., and Hu, S. J., 1997, "Mathematical Modeling in Plane Strain Bending," SAE Trans., Paper No. 970439, 106(5), pp. 63-76.
29. Swift, H. W., 1948, "Plastic Bending under Tension," Engineering, 166, pp. 333-359.
30. Hutchinson, J. W., and Neale, K. W., 1985, "Wrinkling of Curved Thin Sheet Metal," Plastic Instability, Presses Ponts et Chaussées, Paris, pp. 71-78.
31. Yu, T. X., and Johnson, W., 1982, "The Buckling of Annular Plates in Relation to the Deep-Drawing Process," Int. J. Mech. Sci., 24, pp. 175-188.
32. Hill, R., 1950, The Mathematical Theory of Plasticity, Oxford University Press, London.