Recent developments in environmentally friendly antiwear additives and lubricants from tribopolymerization

Tribologia

Volumn 22, Issue 1, 2003, Pages 21-30

  Furey, Michael J ^a   Kajdas, Czeslaw ^b   Kempinski, Roman ^b  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

^b WARSAW UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITIVES; CERAMIC MATERIALS; ENVIRONMENTAL ENGINEERING; LUBRICANTS; POLYMERIZATION; WASTE TREATMENT; WEAR RESISTANCE;

ANTIWEAR ADDITIVES;

TRIBOLOGY;

CARBON; CHLORINE; HYDROGEN; LUBRICATING AGENT; NITROGEN; OXYGEN; PHOSPHORUS; SULFUR;

ANTIWEAR; ANTIWEAR ADDITIVE; LUBRICANT; POLYMERIZATION; TRIBOLOGY;

BIODEGRADABILITY; CHEMICAL COMPOSITION; ENVIRONMENTAL PROTECTION; PHYSICAL CHEMISTRY; POLYMERIZATION; TRIBOLOGY; TRIBOPOLYMERIZATION;

EID: 0037870209     PISSN: 07802285     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (51)

1. Bartz, W.J., "Lubrication and the Environment," Proceedings of the Environ. Aspects Prod. Util. Lubr., Ed. Kovacs, A.J., Technische Akademie, Esslingen, Germany, 1995, pp. 9-28.
2. st. World Tribol. Congr., Ed. Hutchings. I.M., Technische Akademie Esslingen, Ostfildern, Germany, Publisher: Mechanical Engineering Publications, London, UK, 1997, pp. 103-119.
3. Bartz, W.J., "Lubricants and the Environment," Tribol. Int., 31(1-3), Technische Akademie Esslingen, Ostfildern, Germany, 1998, pp. 35-47.
4. Mang, T. "Environmentally Friendly Biodegradable Lube Base Oils - Technical and Environmental Trends in the European Market," Proceedings, Int. Symp. of Adv. Prod. Appl. Lube Base Stocks, Mannheim, Germany, Ed.(s) Singh, Himmat; Prasdad Rao, T.S.R., 1994, pp. 66-80.
5. nd Int. Symp. Fuels Lubr., Symp. Pap., Fuchs Petrolub AG, Mannheim, Germany. Ed.(s) Srivastava, S.P., 2, 2000, pp. 753-766.
6. nd Int. Symp. Fuels Lubr., Symp. Pap.,Aarvi Encon Private Limited, Mumbai, India. Ed(s Srivastava. S.P., 2000, 2 pp. 781-783.
7. st Proc. of the World Congr. Int. Soc. Fat Res., 1196, 3 pp. 483-485.
8. Kaminura S., "Special Issue on Environmental Technology - Environmentally Friendly Products and Manufacturing Technologies," published in NEX Res. Dev., 1998; 39(2), p. 113.
9. Hoglund, E., "Some Basic Properties of Environmentally Adapted Oils," VTT Symp. 1998, pp. 147-159.
10. Van Voorst, R., Alam, F., "Polyglycols as Base Fluids for Environmentally-Friendly Lubricants," Synth. Lubr., 2000 16(4), pp. 313-322.
11. William, A., "Lubricants Based on Renewable Resources - An Environmentally Compatible Alternative to Mineral Oil Products," Chemosphere 2001, 43(1), pp. 89-98. (in German).
12. Wagner, H., Luther, R., Mang, T., "Lubricant Base Fluids Base on Renewable Raw Materials. Their Catalytic Manufacture and Modification," Applied Catalysis, Fuchs Petrolub AG, Mannheim, Germany, 2001, 221(1-2), pp. 429-442.
13. Dornhoefer, G.,Bosch, R., "Service Life Lubrication of Automobile Engines with a View to Environmental Protection," Tribol. Schmierungstech, 1994, 41(2), pp. 86-90.
14. Akagawa, A., "Development of cutting Fluids Which Are Environment- and Human-Friendly," Proceedings of Int. J. Jpn. Soc. Precis. Eng., 1997, 31(4), pp. 253-256.
15. Lierath, F., "High Tech Cutting Technology. Dry Machining, Cooling and Lubrication Techniques with Minimum Use of Coolants and Lubrication as Contribution to Environmentally-Friendly Cutting Process," Otto-von-Guericke-Univ., Magdeburg, Germany, 2000, (9), pp. 11- 15. (in German).
16. Bartz, W.J., "Ecological and Environmental Aspects of Cutting Fluids," published in Lubr. Eng. 2000, 57(3), pp. 13-16.
17. Kassfeldt, E., Goeran, D., "Environmentally Adapted Hydraulic Oils," published in Wear, 1997, 207(1-2), pp. 41-45.
18. Dobereiner, F., Hohn, B.R., Michaelis, K., "Decisive Characteristics for Gear Mechanisms of Environmentally Friendly Lubricants," published in Mineraloeltechnik, 1997, 42(5), pp. 1-22 (in Germany).
19. Pal, M., Singhal, S., "Environment Adapted Lubricants Part II: Hydraulic Fluids," published in the Int. Symp. Fuels Lubr., Conf. Pap., Ed.(s) Basu, B., Srivastava, S.P., 1998, pp. 351-356.
20. Werner, M., "Fast Biodegradable Hydraulic Fluids," published in Tribol. Schmierungstech, 1999, 46(5), pp. 4-9 (in German).
21. Jolley, S.T., "Polyol Ester Lubricants for Use in Environmentally Friendly Refrigeration Applications," presented to the Am. Chem. Soc., Div. Pet. Chem., 1997, 42(1), pp. 238-241.
22. nd Int. Symp. Fuels Lubr., Symp. Pap., 2000, 2, pp. 767-774.
23. th Proc. Eur. Bioenergy Conf., 1996, 3, pp. 1644-1653.
24. Speide., H.K., Lightner, R.L., Ahmed, I., "Biodegradability of New Engineered Fuels Compared to Conventional Petroleum Fuels and Alternative Fuels in Current Use," Applied Biochemistry and Biotechnology, 2000, pp. 84-86 and 879-97.
25. Westerholm R., Christensen, A., Tornqvist, M., Ehrenberg, L., Rannug, U., Sjogren, M., Rafter, J., Soontjens, C., Almen, J., Gragg, K., "Comparison of Exhaust Emissions from Swedish Environmental Classified Diesel Fuel (MK1) and European Program on Emissions, Fuels and Engine Technologies (EPEFE)," Environmental Science and Technology, 2001, 35(9), pp. 1748-54.
26. Gupta, M., Bisht, G.S., Singhal, S., "Role of Lubricant in Environmentally Friendly Two-Cycle Engines," Editor(s) Kovacs, A.J., proceedings of the Environ. Aspects Prod. Util. Lubr., 1995, pp. 97-102.
27. Vasudev, G., Sakalker, A.K., Vartak, V.Y., Ganguli, D., Rao, Y.P., "Development and Field Evaluation of Environment Friendly Partially Synthetic 2-Stroke Gasoline Engine Oil in Three-Wheelers (Autorickshaws)," presented at the Int. Symp. Fuels Lubr., Conf Pap., 1998, pp. 333-341.
28. Signer, M., "Natural Gas Engines. An Environmentally Friendly Alternative for Buses and Communal Vehicles," Gas, Wasser, Abwasser, 1994, 74(4), pp. 276-80 (in German)..
29. Oester, U. "Environment-Friendly Refueling of Natural Gas Vehicles," Sulzer Tech. Rev. 1998, 80(1), pp. 6-9.
30. Kozma, M., "Investigation into the Scuffing Load Capacity of Environmentally-Friendly Lubricating Oils," Synth. Lubr. 1997, 14(3 , pp. 249-258.
31. Havet, L., Blouet, J., Robbe, V.F., Brasseur, E., Slomka, D., "Tribological Characteristics of Some Environmentally Friendly Lubricants," published in Wear, 2001, 248(1-2), pp. 140-146.
32. Korff, J., Cristiano, A., "Requirements for Environmentally Acceptable Greases According to "Blue Angel Regulations," NLGI Spokesman, 2000, 64(8), pp. 22-29.
33. th wp9103/1-wp9103/14.
34. Shackelford, W.M., "Computer Simulations for Environmental Decision Making," Book of Abstracts, 212thCS National Meeting, Orlando, FL, August 25-29, 1996.
35. DeVito, S.C., "Present and Future Regulatory Trends of the United States Environmental Protection Agency," Prog. Org. Coat., 1999, 35(1-4), pp. 55-61.
36. Pitter, Pavel, and Chudoba, Jan, Biodegradability of Organic Substances in the Aquatic Environment, CRC Press, Boca Raton, Florida (1990).
37. Furey, M.J., "The Formation of Polymeric Films Directly on Rubbing Surfaces to Reduce Wear," Wear, 26, 1973, pp. 369-392.
38. Furey, M.J., and Kajdas, C., "Models of Tribopolymerization as an Anti-Wear Mechanism," Proc. Japan International Tribology Conf., Nagoya, Vol. 11, 1990, pp. 1089-1094.
39. th Int'l Trib. Conf. (ASTRIB '94), Perth, Western Australia, 11, Dec. 5-8, 1994, pp. 741-750.
40. th Int'l Tribology Colloq., Technische Akademie Esslingen, Esslingen, Germany, Jan. 12-14, 1998.
41. Tripathy, B.S., Furey, M.J., and Kajdas, C., "Mechanism of Wear Reduction of Alumina by Tribopolymerization," Wear, Vol. 181-183, 1995, pp. 138-147.
42. Furey, M.J., Kajdas, C., Kempinski, R., and Tripathy, B.S., "Tribopolymerization and the Behavior of Oxygen-Containing Monomers in Reducing Ceramic Wear," Proc. EUROTRIB '93, Budapest, Hungary, Vol. 2, Aug. 30-Sept 2, 1993.
43. th Int. Symp. on Automotive Technology and Automation, Florence, Italy, June 16-19, 1997, pp. 241-249.
44. Smith, J.C., Furey, M.J., and Kajdas, C., "An Exploratory Study of Vapor-Phase Lubrication of Ceramics by Monomers," Wear, Vol. 181-183, 1995, pp. 581-593.
45. nd Symp. on Tribochemistry, Janowice, Poland, 15-17 Sept. 1997, pp. 115-125.
46. Kajdas, C., Furey, M.J., and Kempinski, R., "Tribopolymerization: II. NIRAM Applications to the Antiwear Action for Addition-Type Monomers," ibid., pp. 127-139.
47. th Nordic Symposium on Tribology, NORDTRIB 2000, Porvoo, Finland, 11-14 June 2000, Vol. 2, pp. 583-592.
48. Kajdas, C., Furey, M.J., and Kempinski, R., "New Condensation-type Monomer Combinations as Ashless Antiwear Compositions," paper, NORDTRIB 2000, Porvoo, Finland, vol. 1, 11-12 June 2000, pp. 299-310.
49. th Int. Symp. on Ceramic Materials and Components for Engines, Goteborg, Sweden, Elsevier, 10-12 June 1991, pp. 1211-1218.
50. Shama, G., and Wase, D.A.J., "The biodegradation of ε-caprolactam and some related compounds: a review," Int. Biodeterior. Bull., 17, 1 (1981).
51. Allen, D.T., and Shonnard, D.R., Green Engineering: Environmentally Conscious Design of Chemical Processes, Prentice Hall PTR, Upper Saddle River, NJ (2002).