Modelling of semi-solid processing using a modified temperature-dependent power-law model

Modelling and Simulation in Materials Science and Engineering

Volumn 11, Issue 4, 2003, Pages 553-574

  Orgeas L ^a,c   Gabathuler, J P ^b   Imwinkelried, Th ^b   Paradies, Ch ^a   Rappaz, M ^a  

^a EPFL   (Switzerland)

^b Alusuisse T and M Ltd   (Switzerland)

^c CNRS   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM ALLOYS; COMPUTER SIMULATION; FLOW OF FLUIDS; VISCOSITY;

SEMI-SOLID PROCESSING;

RHEOLOGY;

EID: 0037767477     PISSN: 09650393     EISSN: None     Source Type: Journal    
DOI: 10.1088/0965-0393/11/4/309     Document Type: Article

References (31)

1. Paradies C, Rappaz M, Imwinkelried T and Gabathuler J-P 1997 Proc. EPD Congress ed Mishra, p 725
2. Flemmings M C 1991 Behavior of metal alloys in the semi-solid state Metall. Trans. B 22 269-93
3. Martin C L, Kumar P and Brown S 1994 Constitutive modelling and characterization of the flow behavior of semi-solid metal alloy slurries - III Structural evolution under shear deformation Acta Metall. Mater. 42 3603-14
4. Salvo L, Loué W and Suéry M 1995 Influence of prior solidifications on the structure and rheological behaviore of partially remelted Al-Si alloy ISIJ Int. 35 798-804
5. Loué W 1992 Evolution microstructurale et comportement rhéologique d'alliage Al-Si à l'état semi-solide PhD Thesis Institut National Polytechnique de Grenoble, Grenoble, France
6. Liechti T, Chen Z W, Davidson C J and Dahle A K 1998 Casting defects and tensile properties of semi-solid cast AZ91 Proc. 5th Int. Conf. on SS Processing of Alloys and Composites ed A Kumar Bashin et al (USA: Colorado School of Mines) pp 505-12
7. Cho W G and Rang CG 2000 Mechanical properties and their microstructure evaluation in the thixoforming process of semi-solid aluminium alloys J. Mater. Process. Technol. 105 269-77
8. Gabathuler J-P, Barra D, Krähenbühl Y and Weber J C 1990 Proc. 2nd Int. Conf. on SS Processing of Alloys and Composites (Cambridge, MA, USA: MIT Press) p 119
9. Koke J, Hufschmidt M, Modigell M, Heine C, Han S, Stapf S and Petera J 2000 Segregation and wall slip in semi-solid alloys: measurement, modelling and simulation Proc. 6th Int. Conf. on SS Processing of Alloys and Composites ed G L Chiarmetta and M Rosso (Italy: Edimet) pp 623-8
10. Paradies C, Rappaz M, Imwinkelried T and Gabathuler J-P 1998 Modeling the rheology of semi-solid metal alloys during die casting Proc. ICMCWASP (San Diego, USA) p 933
11. Nguyen T Y, Favier D and Suéry M 1994 Theoretical and experimental study of the isothermal behavior of alloys in the semi-solid state Int. J. Plasticity 10 663-93
12. Gebelin J-C, Favier D, Suéry M and Guarnéri C 1996 A FEM simulation of semi-solid material behavior Proc. 4th Int. Conf. on SS Processing of Alloys and Composites ed D H Kirkwood and P Kapranos (UK: University of Sheffield) pp 126-31
13. Martin C L, Favier D and Suéry M 1997 Viscoplastic behaviour of porous metallic materials saturated with liquid - Part I. Constitutive equations - Part II, Experimental identification on a Sn-Pb alloy Int. J. Plasticity 13 237-59
14. Burgos G R, Alexandrou A N and Entov V 1998 Two-phase flow of semi-solid materials Proc. 5th Int. Conf. on SS Processing of Alloys and Composites ed A Kumar Bashin et al (USA: Colorado School of Mines) pp 217-24
15. Modigell M. Koke J and Petera J 1998 Two-phase model for metal alloys in the semi-solid state Proc. 5th Int. Conf. on SS Processing of Alloys and Composites ed A Kumar Bashin et al (USA: Colorado School of Mines) pp 317-26
16. Kang C G, Jung H K and Jung K W 1999 Finite Element analysis with deformation behavior modelling of globular microstructure in forming process of semi-solid materials J. Mater. Process. Technol. 41 1423-45
17. Ko D-C, Min G-S, Kim B-M and Choi J-C 2000 Finite Element analysis for the semi-solid state forming of aluminium alloy considering induction heating J. Mater. Process. Technol. 100 95-104
18. Kumar P, Martin C L and Brown S 1994 Constitutive modelling and characterization of the flow behavior of semi-solid metal alloy slurries - I. The flow response Acta Metall. Mater. 42 3595-602
19. Quaak C J, Katgerman L and Kool W H 1996 Viscosity evolution of partially solidified aluminium slurries after a shear rate jump Proc. 4th Int. Conf. on 55 Processing of Alloys and Composites ed D H Kirkwood and P Kapranos (UK: University of Sheffield) pp 35-9
20. Alexandrou A N, Burgos G R and Entov V 1999 Mathematical and computational modelling of die filling in semi-solid metal processing J. Mater. Process. Technol. 96 59-72
21. Wahlen A 2000 Modeling the thixotropic flow behavior of semi-solid aluminium alloys Proc. 6th Int. Conf. on SS Processing of Alloys and Composites ed G L Chiarmetta and M Rosso (Italy: Edimet) pp 565-70
22. Modigell M and Koke J 2001 Rheological modelling on semi-solid metal alloys and simulation of thixocasting processes J. Mater. Process. Technol. 111 53-8
23. Bowen R M 1976 Continuous Physics. III, Mixture and EM Field Theories (New York, USA: Academic)
24. Gebelin J-C, Geindreau C, Orgéas L, Royer P, Favier D and Auriault J-L 2000 Influence of liquid flow through the solid skeleton on the overall deformation of metallic alloys in semi-solid state Proc. 6th Int. Conf. on SS Processing of Alloys and Composites ed G L Chiarmetta and M Rosso (Italy: Edimet) pp 155-60
25. Cheng D C and Evans F 1965 Phenomenological characterization of the rheological behavior of inelastic reversible thixotropic and antithixotropic fluids Br. J. Appl. Phys. 16 1599-617
26. Laxmanan V and Flemmings MC 1980 Deformation of a semi-solid Sn15%Pb alloy Metall. Trans. A 11 1927-37
27. Suéry M and Flemmings M C 1982 Effect of strain rate on deformation behavior on semi-solid dendritic alloys Metall. Trans. A 13 1809-19
28. 1995 ProCast™ User Manual version 3.0, UES Inc
29. Nguyen T Y 1991 Modélisation du comportement rhéologique d'alliages à l'état semi-solide PhD Thesis Institut National Polytechnique de Grenoble, Grenoble, France
30. Rappaz M, Desbiolles J-L, Drezet J-M, Gandin C-A, Jacot A and Thévoz P 1995 Proc. ICMCWASP VII ed M Cross and J Campbell (USA: Warrendale) p 449
31. Rappaz M, Bellet M and Deville M 2003 Modeling in Materials Science and Engineering (Berlin: Springer) p 447