An improved kinetic model structure for softwood kraft cooking

Nordic Pulp and Paper Research Journal

Volumn 18, Issue 2, 2003, Pages 200-209

  Andersson, Niclas ^a   Wilson, David I ^a   Germgård, Ulf ^a  

^a KARLSTAD UNIVERSITY   (Sweden)

Author keywords

Carbohydrates; Kinetic model; Kraft pulping; Lignin degradation; Optimisation

Indexed keywords

CARBOHYDRATES; DEGRADATION; DELIGNIFICATION; LIGNIN; OPTIMIZATION; REACTION KINETICS; SOFTWOODS;

KRAFT COOKING;

KRAFT PULP;

CARBOHYDRATES; DEGRADATION; DELIGNIFICATION; OPTIMIZATION; REACTION KINETICS;

EID: 0037704563     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2003-18-02-p200-209     Document Type: Article

References (31)

1. Andersson, N. and Wilson, D.I. (2002): Measurement uncertainty in NIR analysis of black liquor parameters, Accepted for publication in Paperi Puu.
2. Andersson, N. and Wilson D.I., Germgård, U. (2002a): Using validated continuous kraft digester models for profile optimisation. 10th Control Systems Conference, 44-48, Stockholm, Sweden.
3. Andersson, N., Wilson D.I. and Germgård, U. (2002b): Validating continuous kraft digester kinetic models with online NIR measurements. American Control Conference, 3783-3787. Alaska, USA.
4. Andersson, N., Wilson, D.I., Germgård, U. and Lindström, T. (2000): Organic matter content in black liquor inside and outside chips during kraft cooking, Paperi Puu 83(12), 538-541.
5. Andtbacka, S. and Tibbling, P. (1994): ECF and TCP bleaching of isothermally cooked (ITC) pulp, Paperi Puu 76(9), 580-584.
6. Bhartiya, S. and Doyle III, F. J. (2002): Modelling and Control of Grade Transition in a Continuous Pulp Digester, 10th Control Systems Conference, 239-243, Stockholm, Sweden.
7. Blixt, J. and Gustavsson, C. A.-S. (2000): Temperature dependence of residual phase delignification during kraft pulping of softwood. Nordic Pulp Paper Res. J., 15(1): 12-17.
8. Christensen, T., Albright, L. F., and Williams, T. J. (1983): A kinetic mathematical model for the kraft pulping of wood. In TAPPI Annual Meeting, 239-246, Atlanta, Georgia, USA.
9. Gustafson, R. R., Slelcher, C. A., McKean, W. T., and Finlayson, B. A. (1983): Theoretical model of the kraft pulping process. Ind. Eng. Chem. Process Des. Dev., 22(1): 87-96.
10. Gustavsson, C. A.-S. and Al-Dajani, W. W. (2000): The influence of cooking conditions on the degradation of hexenuronic acid, xylan, glucomannan and cellulose during kraft pulping of softwood. Nordic Pulp Paper Res. J., 15(2): 160-167.
11. Gustavsson, C. A.-S., Lindgren, C. T., and Lindström, M. E. (1997): Residual phase lignin in kraft cooking related to the conditions in the cook. Nordic Pulp Paper Res. J., 12(4): 225-229.
12. Harkonen, E. J. (1987): A mathematical model for two-phase flow in a continuous digester. Tappi J., 12(12): 122-126.
13. Johnsson, L. (1971): Mathematical models of the kraft cooking process. Technical report, Chalmers University of Technology, Control Engineering Laboratory, Gothenburg, Sweden.
14. Kayihan, F. (2002): A Plug-Flow Continuous Digester Model with Dynamic Compaction and Chip Size Distribution. 10th Control Systems Conference, 263-267, Stockholm, Sweden.
15. Kondo, R. and Sarkanen, K. V. (1983): Kinetics of lignin and hemicellulose dissolution and formation of coniferyl alcohol during the initial stage of alkaline pulping. Int. Symp. Wood Pulping Chem., Tappi, vol. 2, 155-160, Tsukuba Science City, Japan.
16. LéMon, S. and Teder, A. (1973): Kinetics of the deligniticatlon in kraft pulping: I. Bulk delignification of pine. Svensk papperstidn., (11): 407-414.
17. Lindgren, C. T. (1997): Kraft Pulping Kinetics and Modeling, the Influence of HS, OH and Ionic Strength. PhD thesis, Royal Institute of Technology, Stockholm, Sweden.
18. Lindgren, C. T. and Lindström, M. E. (1996): The kinetics of residual delignification and factors affecting the amount of residual lignin during kraft pulping. J. Pulp Pap. Sci., 22(8): 290-295.
19. Meghanathan, N., Saucedo, V. M., and Krishnagopalan, G. A. (1999): Modeling of kraft pulping process based on on-line data from near-infrared analyzer. TAPPI Pulping Conference, AlChE, Orlando, Florida, USA.
20. Michaelsen, R., Christensen, T., Lunde, G. G., Lundman, G., and Johansson, K. (1994): Model Predictive Control of a Continuous Kamyr Digester at SCA-Nordliner, Munksund, Sweden. Pulp Paper Canada, 25(12): 146-149.
21. Michelsen, F. A. (1995): A dynamic mechanistic model and model-based analysis of a continuous Kamyr Digester. PhD thesis, University of Trondheim, Norway.
22. Molin, U. and Teder, A. (2002): Importance of cellulose/hemicellulose-ratio for pulp strength. Nordic Pulp Paper Res. J., 17(1): 14-19.
23. Olm, L. and Tistad, G. (1979): Kinetics of the initial phase of kraft pulping. Svensk papperstidn., 87(5): 458-464.
24. Pu, Q., McKean, W., and Gustafson, R. (1991): Kinetic model of softwood kraft pulping and simulation of the RDH process. Appita, 44(6): 399-404.
25. Saltin, J. F. (1992): A Predictive Dynamic Model For Continuous Digesters. TAPPI Pulping Conference, 261-268, Boston, Massachusetts, USA.
26. Sandström, P. (2000): Modified kraft pulping. Lic. thesis, Royal Institute of Technology, Stockholm, Sweden.
27. Smith, C. (1974): Studies of the mathematical modelling, simulation, and control of the operation of a Kamyr continuous digester for the kraft process. PhD thesis, Purdue University, West Lafayette, Indiana, USA.
28. Teder, A. and Olm, L. (1981): Extended delignification by combination of modified kraft pulping and oxygen bleaching. Paperi Puu, 63(4a): 315-326.
29. Vanohinathan, S. and Krishnagopalan, G. A. (1997): Dynamic modeling of kraft pulping of southern pine based on on-line liquor analysis. Tappi J., 50(3): 123-133.
30. Vroom, K. (1957): The H-Factor: A means of expressing cooking times and temperatures as a single variable. Pulp Paper Mag. Can., 58(3): 228-231.
31. Wisnewski P.A., Doyle III F.J. and Kayihan F. (1997): Fundamental continuous pulp-digester model for simulation and control. American Inst. Chem. Engineers J. 43: 3175-3192.